This is the new Progressive Shock Spring for the MTC2 1/10 EP car. Using the progressive shock springs will improve steering and stability while taming down the aggressiveness due to bumpy TRACK surfaces.

This is the new Progressive Shock Spring for the MTC2 1/10 EP car.

Using the progressive shock springs will improve steering and stability while taming down the aggressiveness due to bumpy TRACK surfaces.

This is the new Progressive Shock Spring for the MTC2 & R 1/10 EP car.

Using the progressive shock springs will improve steering and stability while taming down the aggressiveness due to bumpy TRACK surfaces.

NEW.....X-RING SHOCK SEALS.

LOWER FRICTION BUT WITH TWIN SEALING SURFACES.

These Ultra-Low Friction Seals and are suitable for ALL Mugen On-Road Shocks (1/8th & 1/10th).   4 per pack. (for 4 shocks)

For these seals to work correctly please follow the instructions and Submerge the seals in shock oil for NO LESS that 2 hours before assembly.

PLASTIC SHOCK MOUNTS FOR NEW 6MM SHOCK BALLS 

3 X 6 X 2.5 (2 X PIECES)

1 PAIR

PACK OF 10 BEARINGS (6 x 10 x 3)

10 X BEARINGS

FRONTIE MOTOR MOUNT ASSEMBLY

PACK OF 10

PACK OF 10

Can also be fitted to the standard MTC2 as an upgrade.

Can also be fitted to the standard MTC2 as an upgrade.

NOW REPLACED BY A2806-B

CAMBER TURNBUCKLE LINK 28mm

FOR MTC2 & R

TURNBUCKLE  16mm (M4 X 16mm) 

4 pcs

VERY FLEXIBLE, VERY STICKY BUT EASY TO REMOVE!

THE DOG's...

ALLOY ADJUSTABLE SERVO HORN. SLIGHT OFF-SET

FUTABA 25t

SANWA/KO 23t

Click drop down menu for type....

ALLOY ADJUSTABLE SERVO HORN. SLIGHT OFF-SET

FUTABA etc 25t

TURNBUCKLE WRENCH WITH 2MM TOP WISHBONE WRENCH......A 'Must Have!'

10 pcs

OW8x10 (0.1, 0.2, 0.3) 10 of each.

MA2050 DIFF/SPOOL BEARING HOLDERS

Very light and very strong. Replacement for kit plastic parts. (Per Pair)

Very light and very strong.

Replacement for kit plastic parts.

-1mm = LOWER Centre Of Gravity for diff and spool - -2MM LOWER ON MTC3

10 pcs

8 pcs