mugen 1/8th body clips (8)

A2210 Rear Upper Wishbone Shaft (Alloy) 1 piece.  MRX6X

2 needed as part of 6R to 6X rear end conversion.

(Also Spur Gear Shaft for MTC1 TC)

NEW.....X-RING SHOCK SEALS.

LOWER FRICTION BUT WITH TWIN SEALING SURFACES.

These Ultra-Low Friction Seals and are suitable for ALL Mugen On-Road Shocks (1/8th & 1/10th).   4 per pack. (for 4 shocks)

For these seals to work correctly please follow the instructions and Submerge the seals in shock oil for NO LESS that 2 hours before assembly.

AGM QUICK RELEASE HUBS. 

4 Colours

NOT ALL SILICONE TUBER IS THE SAME..!

WHEN ACCURACY MATTERS!

ALLOY ADJUSTABLE SERVO HORN. SLIGHT OFF-SET

FUTABA 25t

SANWA/KO 23t

Click drop down menu for type....

ALLOY ADJUSTABLE SERVO HORN. SLIGHT OFF-SET

FUTABA etc 25t

Pinion Gear Tool For 0.8M Gears.

MRX6X

PRICE TO FOLLOW.

Delivery mid November

PRICE TO FOLLOW.

Delivery mid November

B0728 STW-14 SNAP RING (5PCS)

C0602/1 NEW MRX6R CLUTCH BEARINGS (X2)

C0602/2 NEW CLUTCH BEARINGS (X10)

C0602/2 Ball Bearing 5x8x2.5 (10pcs)
Used in new typre 6R&X Clutch Bell (4 needed)

D0105R PIVOT BALLS STEEL (2) MRX (All)

D0506 DAMPER SHAFT (2PCS)

D0508 SHOCK DIAPHRAGMS (8 pieces) MTX & MRX 

H0164 ROLL BAR HOOP

H0252 Front One Way Drive Shaft: MRX

MRX6/R Front Drive Shafts (x2 bare)

...ALSO USED AS DRIVESHAFT PINS

1mm Pitch MRX6 & R ONLY.

H0289 2ND GEAR HOUSING MRX5 ONLY

H0469 REAR BODY MOUNT ARM SHAFT

DAMPER PISTONS 

4 x 1 Hole

H0511 Front Spring 1.9 (Black)

H0515 Front Spring 1.8-5.0 (Black) 

Supplied in MRX7 Kit

MUGEN 'YELLOW' FRONT SPRINGS  (1.8)

REAR SPRING 1.8-7.0

(Std Kit Spring = 1.9-7.0)

Std Kit Spring = 1.9-7.0

H0704 ENGINE NUT

H0772 ONE PIECE ENGINE MOUNT

H0775 NEW CENTRIFUGAL SHOE

H0777 STEEL CLUTCH BELL

H0779 CLUTCH SHOE (YELLOW).. NOT HD

OLDER TYPE FOR MRX5 & 6.

H0801A STEERING TIE ROD (2PCS): MRX