EV-PEAK AR1 CHARGER

DC input voltage 11.0V-32.0V 
Charge power max.300W 
Discharge power max.30W 
Charge current 0.1~20.0A 
Discharge current 0.1~20.0A - Regenerative discharge power max. 300W 
Balance current 400mA 
LiPo/Li-Ion/LiFe/LiHV battery cell count 1-6S 
NiMH/NiCd battery cell count 1-15cells 
Pb battery voltage 2V-24V 
Weight 450g 
Dimension 102*120*46mm

FUTABA R304SB-E RECEIVER

AM174023 Low Resistance Solder with 2% Silver

Arrowmax have introduced a dedicated transmitter battery pack for the Sanwa M17 radio. The 3.7V 6000mAh LiPo replaces the standard battery with a high-capacity pack for longer operation time and thus more confidence even when having long days at the track. The battery measures 86x44.5x10.5mm and it comes pre-wired with a universal JR-style plug.

v2 version, new dimensions for perfect fit. 

With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.

The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road.  All supplied in a hard case with 5mm plugs and awesome Aerox styling.  The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.

Specifications

Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st.

Introducing from AEROX the awesome 150HS Soldering Station.

A fully adjustable quality soldering station at a great price.

This version is the 220-240V version with UK plug.

AEROX 150HS BRASS WOOL SOLDERING TIP CLEANER

SOLDERING TIP 220-240V LARGE BEVEL

A must have for any pit box is the mini electric intelligent soldering iron from Centro! It is perfect for all your soldering requirements and ready to use in just over 10 seconds. It features an OLED display for the adjustable temperature range depending on the job in hand.

Simple connectivity to 12-24V DC power and a selection of optional power leads provides users with a host of ways to power up the iron. A selection of optional tips are available for you to fine tune your soldering depending on the job, making the mini pit iron as versatile as they come.

Centro Mini Electronic Intelligent Soldering Iron Features:

• Ready to use in 10-15 seconds

• OLED Display

• Adjustable Temperature Range

• 12-24V DC Input Voltage

• Optional Tips Available

• Compact and portable

• Includes Sloped tip, power cable & stand

Spec Check:

• 65W power output @24v

• Temperature stability - ±2%

• Temperature Range - 100°C - 400°C (max)

Safety instructions:

• Ensure that you use the correct power supply and accessories

• Do not touch the tip of the soldering iron after the temperature has risen to avoid burns

• Before replacing the soldering iron tip, you must turn off the power and wait for the soldering iron to cool down

CENTRO MINI SOLDERING IRON LARGE SLOPED REPLACEMENT TIP

Mains Power Supply (UK version)

Makes it easy to carry your soldering iron to every meeting.

Case contents shown are not supplied with case.

MR33 Moon Style High Speed Aluminium Fan for the perfect motor cooling.

The fan has a rounded top aluminium housing for a very long life and a very cool look.

In addition, the fan has a high speed for the perfect cooling of your motor!

Cable length (to plug): 165mm

The MR33 Moon Style fans are available in 30mm and 40mm versions.

MR33-AMCF-30 MR33 Aluminum Moon Style High Speed Fan 30mm
MR33-AMCF-40 MR33 Aluminum Moon Style High Speed Fan 40mm

28000 RPM 5V-8V 30X30MM

Experience the power of Team Cayote Performance batteries,

CORE RC -Servo 5Kg .08 Sec 1/12th/GT12

New from CORE RC is this super fast, extremely lightweight digital servo, suitable for 1/12th scale and GT12 cars.

Main Features;

- Coreless motor
- Metal Geared
- Twin Ball Bearing
- Digital Performance
- Heatsink for cooling
- Huge range of Accessories
- Attractively Packaged

Specification;

Weight - 33g
Speed - 0.08sec/60deg (6v)
Torque - 5.0kg/cm (6v)
Size - 35.5mm x 15.3mm x 42.2mm
25T spline

The CORE RC 5008 servo comes with a huge range of accessories.

CORE 60R BRUSHLESS SPEED CONTROLLER

Core RC Super Flexible High Quality silicone Sensor wire.

Please choose length required from drop-down menu..

Awesome plug covers that help with the removal of your battery plugs.

Plus, assist you in plugging in the correct polarity. 5mm diameter. Super bling look!

These Low profile versions are held in place with a spot of cyanoacrylate glue, not supplied.

SIMPLE, TWIST TO LOCK.

2-Force X5 is a dual-channel smart charger designed for professional RC model racing users, combining high-performance power management technology, exceptional user interaction, and a variety of operational modes.

Whether for battery activation before high-intensity races or multi-task power support

In stock now

In stock now

In stock now

In stock now

IN STOCK NOW

OXIDE 1/10 G2 is a new generation electronic speed controller for sensored Brushless DC motors.

SPECIAL PRICE. 1 ONLY AT THIS PRICE

The T7XC was developed for car/boat modellers who want a premium stick style radio for land and water based modelling. The technology inside is largely based on the well known T7PX with some new features and this stylish new ergonomic case shape.

The case is made from high quality moulded plastic and finished in a stunning deep satin black, accented by chrome mouldings and switches. The huge 4.3" colour touch screen has a 'transflective' surface for great visibility indoors and out. The screen is easy to use and responds quickly to the touch. There is also a jog dial if you prefer to navigate that way.

Using Futaba's fastest technology 'T-FHSS SR' the response has a ultra-fast frame rate of 2.45 milliseconds! This new system brings in a locked in feel and response that racers and performance drivers will truly appreciate. The T7XC is also compatible with Futaba T-FHSS, S-FHSS and FASST so you can select the preferred transmission system for each car to suit your requirements and budget. With T-FHSS telemetry the data can be displayed on the screen or relayed by a synthesised voice using the in-built speakers or headphones (not included).

The T7XC has the ability to update its software using an SD card but it also has NFC (Near Field Communication) which allows you to update the radio from an android phone just by opening an APP and placing it next to it! Just another way that Futaba is at the forefront of technology to make your hobby easier.

Highest B210 (Torque) Servo

Highest Servo's are used by some of the best drivers on the planet including our own Jorn Neumann and Olly Jefferies, plus David Ronnefalk and Ronald Volker.

A high torque brushless servo mainly for 1/8th buggy class and 1/8th On-Road.

Specifications

- High Efficiency Brushless Motor

- Full Aluminium Case

- Full Metal Gears-POWER GEAR

- Output Shaft 25T

- Dynamic Torque (6.0V) : 24.5 kg-cm

(7.4V) : 31.1 kg-cm

- Operating Speed (6.0V) : 0.12 sec/60°

(7.4V) : 0.09 sec/60°

- Operating Temperature 14° to 140° F (-10 to +60° C)

- Operating Voltage 6.0V~7.4V

- Size 39.5 * 20.0 * 38.7 mm

- Weight 73.1g

Hasi Tuned aluminium servo horn designed specifically for On-road (and some Off-road) cars.

By making the shape of the arm offset it is possible to achieve the maximum steering angle with a linear steering operation.

Fits Futaba, Savox Power 25t etc etc

Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.

ONE ONLY AT THIS PRICE.

Specification:

Cont./Peak Current - 60A/380A

Motor Limit - Sensored / Sensorless Brushless Motor

Applications - 1/10, 1/12 on-road & off-road CLUB competition and normal training

(Motor) KV Limit - Brushless Motor Limit 2S LiPo/4-6S NiMH: 8.5T (1/10 on-road), 11.5T (1/10 off-road)
Brushless Motor Limit 3S LiPo/8-9S NiMH:13.5T (1/10 on-road), 17.5T (1/10 off-road) .

LiPo/NiMH Cells - 2-3S LiPo/4-9S NiMH

BEC Output - 6V, 2A (Line-mode BEC)

Fan (Included) - Powered by the stable BEC output voltage of 6V

Connectors - Input End: No, Output End: No.

Size/Weight (mm/g) - 33.5mm(L) x 28.5mm(W) x 30.5mm(H) / 59.8g

Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.

Built-in polarity protection

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.

Built-in capacitor module

The built-in capacitor module eliminates the need for external capacitors and unwanted space.

RPM speed limit function

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.

Zero timing competition design

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.

Built-in BEC supporting high-voltage steering gear

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

User-friendly and convenient for set-up

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.

Protection functions

The various protection functions have greatly improved the reliability and durability of the ESC.

Single programming and RESET design button

The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.

Support bi-directional motor movement

The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.

Support ESC firmware upgrade

Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No

Specifications

Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A

Wires & Connectors

Input Wires - Black-14AWG-200mm*2
Output Wires - Black-14AWG-200mm*3
Input Connectors - No
Output Connectors - No

Fan

Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC

ESC Programing via

SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate

Firmware

Firmware Upgrade - Supported

Size & Weight

Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)

Applications

Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10thTouring Cars & Buggies for Racing
KV Rating/T Count - ≥10.5T 3650 Motor

The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions.

This speed control is NOT BRCA legal for 2024 Nationals in the control 17.5T or FWD class.

Control products for that class are HW30112003, HW38020321, HW30408011 Fan intelligent start and stop function When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

Freewheeling Feature With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners. Built-in polarity protection One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals.

Multi RPM limit, select as needed Supports 79RPM Limits （10000-88000RPM）RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world. Built-in capacitor module, optimized layout The built-in capacitor module eliminates the need for external capacitors and unwanted space.

Built in BEC The ESC has a built-in BEC which can support a maximum output current of up to 8A. The output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
Built-in data logging function The ESC has a built-in data recording function making it easy to obtain the operating status. The data includes; Minimum voltage Maximum ESC temperature Maximum current Maximum motor temperature

Maximum RPM Wireless connection for data recording and analysis After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions.
Note: Due to the Bluetooth transmission distance, the effective distance is about 5m! Parameters optimized It is tailored and are more in line with competition needs.
Type Scale - 1/10th Brushed/Brushless - BL Sensored/Sensorless - SD Waterproof - No Specifications Cont./Peak Current - 60A/380A Input Voltage - 2S LiPo BEC Output - 6V/7.4V @4A Wires & Connectors Input Wires - Black-14AWG-200mm*1 Red-14AWG-200mm*1 Output Wires - Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1 Input Connectors - No Output Connectors - No Fan Size - 25x25x10mm Output Wires - 5-7.4V Input Connectors - Powered by BEC

We are moving premises at the end of May this year and we are doing  'stock rotation' at the moment.

Keep an eye out for more special offers...on existing stock only

Introducing from Hobbywing the XR10 G3 Competition Speed Control.

HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.

HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.

We are moving premises at the end of May this year and we are doing  'stock rotation' at the moment.

Keep an eye out for more special offers...on existing stock only
.

HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.Introducing from Hobbywing the XR10 G3 Competition Speed Control.

HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.

Special Design for 1/12th Scale Top Racing

Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to 1/12th scale top touring car racing.

High reliable heat dissipation system

Internal power board covered with copper heat conducting confluence strip which is HobbyWing’s patent technology. The strip is convenient for transferring the internal heat rapidly to an integrated shell radiator, together with a high-speed heat dissipation fan, which build a high reliability heat dissipation system, to ensure the ESC is always in the best state of heat dissipation.
Super BEC

Internal BEC features booster circuitry can output the current/voltage of up to 6A/6V and power various servos without connecting any extra receiver battery.

Built-in Electronic Switch & Capacitor Module

Built-in electronic switch (with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design) and capacitor module save space and make the wiring simple and neat.

Programming/Upgrading/Data Reading Wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Adjustable Throttle & Brake PWM Frequencies

Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).

Separate Programming/Fan Port

The separate PRG/FAN port on the ESC can power an external fan to maximise cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.

Innovative Data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box to analyse .

Scale - 1/12th

Brushed/Brushless - BL

Sensored/Sensorless - SD

Waterproof - No

Specifications

Cont./Peak Current - 120A/830A

Input Voltage - 1S Lipo/3-4 Cell NiMH

BEC Output - Switch Mode: 6V@3A

Introducing the Hobbywing XeRun V10 G4.

Built for the ultra competitive Stock racing, the V10 G4 has been tested and developed together with World and European champions.

This new generation has been greatly optimised with the stator being redesigned for higher efficiency and is equipped with ultra high grade custom magnetic ring rotor for maximum torque and increasing the output power by 5%.

The internal resistance has also been reduced by about 4% resulting in a more efficient and cooler temperature of the motor.

The motor adopts a full exposed stator core and is directly exposed to the air for excellent heat dissipation.

The outer diameter is maximised to increase the stator heat dissipation area by 25.6% compared to the V10 G3R motor.

The motor is equipped with a high-precision end bell plate that uses high quality structural components to greatly improve the consistency and structural stability of the power output at all times.

The V10 G4 adopts a modular structural design which is convenient for maintenance which prolongs the service life of the motor.

Specifications

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2

Relevant Parameters

KV Rating - 3950
LiPo Cells - 2-3S
No-load Current(A) - 4.5

Size & Weight

O.D.(mm) - 35.8
Length (mm) - 51.4
Shaft Diameter (mm) - 3.175
Weight (g) - 149
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4

Timing

30-60 Degrees(Adjustable)

Applications - 1/10th STOCK Class Racing

*BRCA & EFRA Approved*
The new G4R stator and winding design reduces the overall internal resistance,
while maintaining the requirements for sanctioning spec class rules.
The improved motor efficiency reduces the temperature rise to
keep internal resistance numbers consistent.

The motor adopts an open core can, and uses an all new Rotor.
This allows the heat generated by the stator to be directly cooled by airflow.
The can and rotor design allows airflow through the motor to
maximise the cooling.

HOBBYWING WI-FI EXPRESS MODULE

HOBBYWING WI-FI EXPRESS MODULE

REQUIRED FOR BRCA 17.5 TOURING CAR COMPETITION 2024

REQUIRED FOR BRCA 17.5 TOURING CAR COMPETITION 2024

AVAILABLE EARLY MARCH '24

Built-in polarity protection

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.

Built-in capacitor module

The built-in capacitor module eliminates the need for external capacitors and unwanted space.

RPM speed limit function

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.

Zero timing competition design

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.

Built-in BEC supporting high-voltage steering gear

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

User-friendly and convenient for set-up

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.

Protection functions

The various protection functions have greatly improved the reliability and durability of the ESC.

Single programming and RESET design button

The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.

Support bi-directional motor movement

The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.

Support ESC firmware upgrade

Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No

Specifications

Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A