Replacement Starter Ring for Mugen Starter Boxes.

MUGEN STARTER BOX ( OFF ROAD ONLY)

Regarded by many drivers world-wide as the best Starter Box on the market.

Supplied in kit-form, it comes complete less batteries. Using either 2 x 2cell (7.4v Lipo or 6.6v Life) the starter offers real high torque with 2 motors and long life rubber drive wheel.

On-Road NOT available at present.

This is an aluminium bodied grey anodised glow plug starter.
The glow starter has a power meter on the end cap, has a 2½ long end to
fit most all nitro engines and comes with a 1800mAh 1.2V battery.
(Charger not included).

NOT ALL SILICONE TUBER IS THE SAME..!

CLEAR INS BOX EFRA APPROVED

BLACK INS BOX EFRA APPROVED

This special Speed version of the OS RP7 glowplug is plated in 24K gold. But the gold is not just for added for cosmetic 'bling' as the gold plating was chosen for its thermal characteristics in order to improve throttle response in medium and low speed ranges over a standard plug.

INS-BOX Air Filter and Intake Silencer. 

Suits all .21 On-Road motors.

OS PRESSURE CHAMBER SET. (1/10th & 1/8th)

OS Glowplug RP7 71642060

O.S. Engines T-Series RP7 Cold Heat Range Turbo Glow Plug.

Recommended for nitro ON-ROAD engines .12 -.21 16 - 25% nitro fuels

GENUINE OS GLOW PLUGS.

No' 7 (.21 cool to warm weather)

O.S. Engines T-Series RP8 Ultra Cold Heat Range Turbo Glow Plug.

Recommended for nitro ON-ROAD engines .12 -.21 16 - 25% nitro fuels

O.S. Engines T-Series RP7 'GOLD'

Cold Heat Range Turbo Glow Plug.

Recommended for nitro ON-ROAD engines .12 -.21 16 - 25% nitro fuels

NEW PRC INS-BOX SET for 1/8 and 1/10 on road scale.

EFRA APPROVED with homologation number INS202301

Super light weight (-20%)

8mm lower and 3mm diameter less than other ins-boxes.
The INS-BOX is made of light weight ABS, colour black.
The sponge is low profile to reduce the total height of the ins-box.

The air inlet is made by x2 8mm holes and then air pass through the "turbo effect" and goes into the carburettor with more speed and more pressure. This increase of air pressure makes the top speed rising of 2km/h, more constant carburation and more torque.

All combined with new aero design, especially designed for new 1/8 on road bodies.

PRO-RC SMALL INS-BOX Air Filter and Intake Silencer. 

Suits all .21/.12 On-Road motors.

Introducing the Project RC "S750" Professional 1/10 & 1/8 On-Road Starter Box: a potent, economical, and dependable companion for fuel on-road enthusiasts.

Engineered to surpass expectations, this starter box effortlessly tackles tight engines. 

Equipped with high power - 775 size motor, the "S750" generates ample power to conquer even the most stubborn engines.
Pre-installed T-Style connectors ensure a seamless, low-resistance connection from the get-go.
Boasting high-quality 16awg silicone shielded wiring and quick-change connectors, maintenance is a breeze.
Its adaptable battery tray accommodates commonly used 7.2V NiMH or 7.4V LiPo packs, simplifying setup for users with existing batteries. With slight adjustments, the tray easily accommodates a 4S starter box pack.

Offering convenience, the quick access cover release tab unveils the inner workings without requiring tools—just press and lift!
Supported by the reputable Project RC brand, the "S750" ensures nitro enthusiasts have a potent and budget-friendly solution that won't leave them stranded.

The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and 
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes 
based on ambient temperature. 

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a 
minimal of stress and wear on the engine. It help relieve the stress on the crank, 
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth 
engine start, with no stress on your starterbox. Fuel consumption is much less, as 
you do not have to spend time warming up and adjusting your engine. A pre-heatet 
glow-plug will increase the life of your plug. It is also perfect for break-in, as it 
reduces the "pinch" on your new engine. You will experience that engine pre-heating 
is a must. Most importantly, it will quickly pay for itself by increasing engine life and 
performance! 

Features:

MCU control heating time and heating power for maximum safety. 
Safety timer: turn off power around 10 minutes automatically. 
Built-in temperature sensor: to control the output power of the heater. 
LED indicator for status of engine heater. 
12V DC source with low voltage cutoff. 
Fireproof and heat resistant adjustable cover. 
Fits all .19-.26 RC nitro engines. 
Very small, lightweight and compact for quick and easy storage. 
It's designed to transfer heat effectively and efficiently. 
Access port on top allows you to start and monitor your engines temperatures 
without having to take the heater off.