Best Sellers
Best Sellers
SK-600054-01 - Power Switch
SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack.
£10.00
VAT included
Security policy
Authorised specialist dealer, Established 1987.
Dispatch policy
Dispatch normally within 24-48hrs DPD/ROYAL MAIL (Subject to Stock).
SK-600054-01
2 Items
Specific References
Customers who bought this product also bought:
-
SHOE GOO (109.4ml) The...
Price £13.99It's (was) back in stock....
The RC Car Racer's Best friend. Repairing car bodies is just ONE of the many things that you can do with this amazing glue.
Flexible, clear when set and very strong!
-
-
ALLOY SERVO SAVER TOP...
Price £28.50Replaces plastic servo saver top Part No: H2325A.
Sometimes if the countersunk m3 bolt is overtightened it can cause
the plastic to split.
This will not happen with this Optional part.To fit MRX6R and MRXRX only.
-
B0237 MUGEN STARTER...
Price £84.99MUGEN STARTER BOX ( OFF ROAD ONLY)
Regarded by many drivers world-wide as the best Starter Box on the market.
Supplied in kit-form, it comes complete less batteries. Using either 2 x 2cell (7.4v Lipo or 6.6v Life) the starter offers real high torque with 2 motors and long life rubber drive wheel.
On-Road NOT available at present.
-
SA107A54526A SANWA...
Price £84.99SSL Compatible
- Compatible with CODE10 (M12S (RS), Exzes ZZ, MT-44)
Not compatible with CODE5 (M12, Exzes Z, MT-4S, MT-4, MT-S)
- MULTI SETTING GEAR compatible
Not compatible with PGS SETTING GEAR
- SSR mode compatible
- SHR mode compatible
- Lipo 2 cell battery compatible
- High torque type
- Coreless motor
- Metal Gears
- AL Heat SinkProgrammable Servo to be compatible with SSL & Telemetry
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Multi Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Multi Setting Gear is necessary.- Setting Items
- SSL-CH (SSL Channel Setting) - STRETC (Stretcher Adjustment) - BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) - MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) - BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
- Multi Setting Gear is necessary for setting.Speed
0.11 sec / 60° (7.4 V)
0.13 sec / 60° (6.0 V)Torque
26.5 kg ·cm (7.4 V)
23.3 kg ·cm (6.0 V)Dimensions
40.5 X 20.5 X 37.2 mmWeight
59 g -
-
B0330 MUGEN SUPER...
Price £7.33A 'MUST HAVE' FOR EVERY TOOLBOX
B0330 Super Joint Grease.
Ideal for all joints.....plastic to plastic, plastic to metal and metal to metal...i.e. Drive Shaft Dog Bones &
Joints etc. -
SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack.