New Products
New Products
Home
Active filters
-
-
Hasi Tuned CONICAL...
£35.00Conical manifold that guarantees easy tuning and low fuel consumption. HT01
This is great for middle to fast tracks were there is normally high fuel consumption.
-
HT-017 HASI STEEL REAR...
£52.80Hasi Tuned Swiss Steel Rear Ball Bearing for On-Road Engine (14x25.4x6 mm)
-
-
HT-022 HASI TUNED...
£55.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
-
HASI TUNED PIPE EFRA...
£85.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
HARD COATED VERSION
-
HT-025 HASI 3.5CC...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HASI 3.5CC 0.2MM LINER...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HT-038-CONICAL...
£36.00A conical 90° version (Hard Coated) which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-038-CONICAL MANIFOLD
£32.00A conical 90° version which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-072 HASI SLEEVE...
£48.00The must-have tool on every tuner’s bench.
- More control.
- More precision.
-
HASI Tuned Rear Back...
£32.99After many tests, Hasi engines is proud to present its newest development.
The new backplate reduces friction, improves the flushing inside the crankcase and with that improves the torque in the bottom to mid rpm range. -
-
-
-
Hasi Tuned Special...
£18.99Hasi Tuned aluminium servo horn designed specifically for On-road (and some Off-road) cars.
By making the shape of the arm offset it is possible to achieve the maximum steering angle with a linear steering operation.
Fits Futaba, Savox Power 25t etc etc
-
HASI TUNED 'LOW...
£65.20New Low Profile Head by HASI TUNED, this head in addition to lowering the centre of gravity, due to a saving of 3.8 grams compared to the original.
These heads has been specially produced for engines with AAC liner, as it guarantees a faster and easier warm-up of the engine.
-
-
HASI TUNED MAIN JET...
£25.99Enlarged fuel window.
Enjoy a wider and more precise tuning range, making carburation faster, easier, and more stable under all conditions.
More control.
Less guesswork.
High-grade stainless steel construction Precision-machined for optimal fuel atomisation inside the carburetor, ensuring better efficiency and improved throttle response at high RPM.Full compatibility Direct fit for all OS 21M2 series carburettors.
📦 Now available as an optional upgrade for all OS-based engines.
THESE WORK!!! -
-
-
HT-078-9 HASI TUNED...
£11.89Hasi Tuned High Performance Venturi 9.00 mm Ultra Short Version
Fits all OS based carburettors.
Similar design to MAX engine short venturi. Immediate power increase. -
-
-
-
-
-
Hasi Tuned 7 PORT 2024/25
£439.99 £619.99SALE SPECIAL - 1 ONLY
- - New high dissipation and low density aluminium cooling head, to combine functionality and lightweight.
- - New crankshaft, with revised timing and balancing.
- - New piston and liner, 7 PORTS with high compression piston made from rod.
- - New reinforced 'GENUINE OS' conrod.
- - New type Low Profile head - RED.
Each engine will have its own dedicated sleeve, which will be perfectly honed inside the crankcase, avoiding dangerous vibrations; the design of the ports has been revised to combine performance and reliability.
COMES COMPLETE WITH 'PRE-RUN' (Proper running not oil bath!) + Hasi Special Back Plate
Like every Hasi engine, they are numbered one by one and accompanied by a certificate of guarantee and authenticity and the useful engine book.
-
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
-
PG Muffler Glove
£12.99
Special protective grease resistant to high temperatures.
Apply to the surface of the exhaust pipe and the manifold.
All the rubber and dust residues that will be attached can
be easily removed with a simple cloth and without any difficulty.One application is enough even for a full day, just do not remove the
product from the exhaust. -
PG MUFFLER GLOVE SPRAY
£18.99P-Line Muffler Glove is a special protective grease resistant to high temperatures (-35°C +270°C).
Apply by spraying Muffler Glove generously directly onto the exhaust, simulating a paint job.
For best results, we recommend applying two coats of release agent).After use, any rubber residue that adheres can be easily removed with a simple cloth and without any effort.
One application lasts for more than 12 hours.
NO MORE HOURS SPENT CLEANING THE BURNT ON CRAP ON YOUR EXHAUSTS!A **MUST HAVE** for every nitro racers toolbox
Large 400ml spray can for ease of use. -
PG FAST CLEANER
£5.99The new benchmark in professional cleaning for RC micromotors arrives.
🎯P-Line Fast Cleaner – Code: PG16206 Designed by Pepe Group to meet the highest standards in the RC industry.
💥High-performance technical cleaner for internal and external use of micromotors:
✅Degreases deeply
✅Zero residues
✅Safe on silicones and plastics – designed not to damage them
✅Specific formula for the RC sector 🧪Tested to satisfy the most demanding professionals and pilots.
🚀600 ml format with constant high pressure delivery: maximum effectiveness from the first to the last spray.⚙️It's not just a degreaser. It's the ultimate technical cleaner for the RC world.
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
100T RW RACING RACING...
£5.99Unlike most of the competition, all RW spurs and pinions are rotating machine cut to guarantee their concentricity which linear cut "cogs" can never match.
-
104T RW RACING RACING...
£5.99Unlike most of the competition, all RW spurs and pinions are rotating machine cut to guarantee their concentricity which linear cut "cogs" can never match.
-
106T RW RACING RACING...
£5.99Unlike most of the competition, all RW spurs and pinions are rotating machine cut to guarantee their concentricity which linear cut "cogs" can never match.
-
108T RW RACING RACING...
£5.99Unlike most of the competition, all RW spurs and pinions are rotating machine cut to guarantee their concentricity which linear cut "cogs" can never match.
