New Products
New Products
Home
-
-
MAXIMA R6 .21 ON-ROAD...
£455.99 £599.99ONE LEFT WITH MAXIMA MODIFIED BACK-PLATE
Maxima MX Europa have introduced their new .21 engine for 1/8 On-Road class, the Maxima Mx R6.
Over the past years several tests have been done with Mx R2 and Mx R4 to get to the R6,
with all the quality standard of our engines and overall performance regarding torque and runtime.The Mx R6 is based on O.S Speed R2103 with special factory modifications to Crankshaft, Liner and
Piston and comes 'Pre-Run' to shorten the running in process by half!
Main Features:
Lower Centre of gravity for better handling
• A second inner button head allows for finer tuning to meet track conditions
• New ceramic rear bearing reduces friction loss
• Compatible with 16% nitro fuel, which complies with EFRA regulations
• Retains O.S Speed innovations such as DLC coating and tungsten weighted crank shaft
Power with Economy!
All motors are factory selected, tuned and modified by Maxima.PLEASE NOTE:
ALL MAXIMA MOTORS ARE SUPPLIED PRE-RUN USING OIL BATH METHOD (Not fully run-in) -
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
PG Muffler Glove
£12.99
Special protective grease resistant to high temperatures.
Apply to the surface of the exhaust pipe and the manifold.
All the rubber and dust residues that will be attached can
be easily removed with a simple cloth and without any difficulty.One application is enough even for a full day, just do not remove the
product from the exhaust. -
PG MUFFLER GLOVE SPRAY
£18.99P-Line Muffler Glove is a special protective grease resistant to high temperatures (-35°C +270°C).
Apply by spraying Muffler Glove generously directly onto the exhaust, simulating a paint job.
For best results, we recommend applying two coats of release agent).After use, any rubber residue that adheres can be easily removed with a simple cloth and without any effort.
One application lasts for more than 12 hours.
NO MORE HOURS SPENT CLEANING THE BURNT ON CRAP ON YOUR EXHAUSTS!A **MUST HAVE** for every nitro racers toolbox
Large 400ml spray can for ease of use. -
PG FAST CLEANER
£5.99The new benchmark in professional cleaning for RC micromotors arrives.
🎯P-Line Fast Cleaner – Code: PG16206 Designed by Pepe Group to meet the highest standards in the RC industry.
💥High-performance technical cleaner for internal and external use of micromotors:
✅Degreases deeply
✅Zero residues
✅Safe on silicones and plastics – designed not to damage them
✅Specific formula for the RC sector 🧪Tested to satisfy the most demanding professionals and pilots.
🚀600 ml format with constant high pressure delivery: maximum effectiveness from the first to the last spray.⚙️It's not just a degreaser. It's the ultimate technical cleaner for the RC world.
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
