New Products
New Products
Home
-
LENS GHIBLI 2.0 1/10...
£20.99 £26.99IN STOCK NOW
PASSED BRCA HOMOLOGATION 28/05/2024
Thanks to the experience of the best drivers in the category and after several hours of development and track tests, the Ghibli 2.0 is born!
The NEW GHIBLI 2.0 delivers better cornering due to the more tapered shape of the front wheel arches, and better grip thanks to the stiffening of the rear axle. The body shell contributes to an improvement in lap times, making driving more relaxing leaving you more concentration to improve your speed!
Available in STANDARD or LIGHTWEIGHT body weights.
-
-
-
-
-
-
ELCERAM OXIDE G2...
£197.99 -10% £219.99OXIDE 1/10 G2 is a new generation electronic speed controller for sensored Brushless DC motors.
-
Highest B210 (Torque)...
£149.99Highest B210 (Torque) Servo
Highest Servo's are used by some of the best drivers on the planet including our own Jorn Neumann and Olly Jefferies, plus David Ronnefalk and Ronald Volker.
A high torque brushless servo mainly for 1/8th buggy class and 1/8th On-Road.
Specifications
- High Efficiency Brushless Motor- Full Aluminium Case
- Full Metal Gears-POWER GEAR
- Output Shaft 25T
- Dynamic Torque (6.0V) : 24.5 kg-cm
(7.4V) : 31.1 kg-cm
- Operating Speed (6.0V) : 0.12 sec/60°
(7.4V) : 0.09 sec/60°
- Operating Temperature 14° to 140° F (-10 to +60° C)
- Operating Voltage 6.0V~7.4V
- Size 39.5 * 20.0 * 38.7 mm
- Weight 73.1g
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
