New Products
New Products
Home
-
-
AEROX TC DROOP GAUGE &...
£19.99Introducing the new Aerox droop gauge set for 1-10th Touring cars.
A new universal way to take the confusion out of measuring droop across different chassis manufacturers.
Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.
Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.
For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.
Please note: You will have to use 10mm Blocks. Not supplied in this kit. -
AEROX ELITE LIPO...
£70.99With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.
The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road. All supplied in a hard case with 5mm plugs and awesome Aerox styling. The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.
Specifications
Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st. -
AX069 AEROX Soldering...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
-
AEROX SOLDERING...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
This version is the 220-240V version with UK plug.
-
-
-
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
-
SUNPADOW LIPO...
£64.99Sunpadow's high-end Platin series has released four new high-voltage（HV） Lipo batteries.
The new HV products will further improve the competition-grade application coverage of Platin series products.
The super-conductive material used in its formula can greatly reduce the common swelling phenomenon of car model batteries while improving the discharge performance.Awaiting BRCA - EFRA - IFMAR - ROAR approval.
SPECIFICATIONS 6100 mAh 2S 7.6v 4mm Plugs 140C Burst L139mm x W47mm x D19mm Weight 237g 46.32Wh
