New Products
New Products
Home
-
-
-
-
-
OS 21XZ Wrist-pin OS...
£5.39- VSR01
- VSR02
- VSPTO01
- VSM01
- OS R2101
- OS R2102
- OS R2103
- OS R2104
OS R2105 - OS R21 EURO (I & II)
- OS 21XZ-R
OS 21XZ-GT
Length: .53" (13.5mm)
Diameter: .16" (4mm) -
-
-
OS SPEED R2104...
£172.99NEW OS2104 Liner, Piston and ConRod Assembly.
Displacement: 3.49 cc
Bore: 16.08 mm
Stroke: 17.2 mm -
OS2DA07000 Rear Cover...
£27.99BACK-PLATE FOR ALL OS BASED ENGINES. A 'No Brainer!'
STEEL INSERT (Replaceable) -
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
O.S. Glowplug Speed...
£14.00This special Speed version of the OS RP7 glowplug is plated in 24K gold. But the gold is not just for added for cosmetic 'bling' as the gold plating was chosen for its thermal characteristics in order to improve throttle response in medium and low speed ranges over a standard plug.
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
MTB04 16-10CM CZ1...
£64.00SPECIAL LIMITED OFFER . . . . 3 for the price of 2
(Price shown is for 3 x CZ1)
LIGHT (1.0mm)
Pre-Cut MUGEN.
The Body to have!
Please note:
This offer is ONLY on existing stock. -
XTREME R18 'ORIGINAL'...
£33.99XTREME R18 LIGHT PRE-CUT 'MUGEN' 1.0mm
All have EFRA stamp.
Good balanced body for most conditions and tracks (good for asphalt with natural oversteer).
Lightweight (1.0mm) is the slightly thicker bodyweight but stronger.
Ultra Light .76mm. (+£4 surcharge. 3-4 weeks)
-
AVENGE 1/10th Nitro by...
£24.99A Well Balanced body for fast tracks.
Good for Higher grip tracks.
Pre-Cut for Various Cars. See Drop-Down list
All 'LIGHT' 1mm. Extra Light available to order (3-4 weeks)
-
-
-
'HAMMER' 1/10th Nitro...
£28.99LIGHT (1.0mm)
Pre-Cut MUGEN.Body with good steering.
Good for tracks with smooth asphalt, with natural understeering.
-
XTREME 'HYPER' DIABLO...
£29.99Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK. -
XTREME 'HYPER' DIABLO...
£35.99Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK.2019 PRICES HELD FROM MANUFACTURER. All have EFRA stamp.
-
XTREME 'HYPER' DIABLO...
£27.99Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK. -
XTREME 'HYPER' DIABLO...
£35.99Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK.2019 PRICES HELD FROM MANUFACTURER. All have EFRA stamp.
-
XTREME 'HYPER' DIABLO...
£33.99Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK.2019 PRICES HELD FROM MANUFACTURER. All have EFRA stamp.
-
XTREME 'HYPER' DIABLO...
£33.99Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK.2019 PRICES HELD FROM MANUFACTURER. All have EFRA stamp.
-
XTREME 'HYPER' DIABLO...
£33.99Cut for SERPENT
Handling as per SUPER Diablo but with Stronger Steering and EVEN more Stability.
The 'Drivers Choice' across Europe and the UK.2019 PRICES HELD FROM MANUFACTURER. All have EFRA stamp.
-
-
XTREME MTR003C CARBON...
£37.99NEW GENERATION CARBON FIBRE 1/8 BODY STIFFENERS
MTR003CTo fit all 1/8th Xteme bodyshells.
-
-
-
O.S. SPEED T1204 1CS00
£399.99Featuring improved torque at medium to low speeds, the throttle response has also been improved.
This has been achieved through a newly designed crankshaft with different counter weight shape which has had two tungsten weights installed for improve performance.
The cooling head has also been changed to improve cooling, while the button and its o-ring has been modified to prevent dust entering this area.
- New inner crankshaft.
- New Cooling-head increased cooling.
- New combustion chamber/o-ring.
New Pipe & Manifold: 1070SC(EFRA2672)/MT03
Type : Touring Contents : .12(2.11cc) Bore : 13.67mm Stroke : 14.30mm Crankshaft : DLC/TUNG/SIL 12mm SG/SPT Main Bearing : 12mm Ceramic Front Bearingt : 7mm HighSpeed Cylinder type : ABC Ports : 3 Exhaust : 1 Carburator : 12F5(B) with 5.5mm venturi Cooling-Head : 48mm/6 ribs Underhead : for glowplugs Conical/Turbo RMP : Max Power @ 33K RPM (5-45K RPM range) Weight : 215Gr -
O.S. SPEED R2105
£469.99New OS Speed R2105 IN STOCK NOW
Features:- NEW FROM THE GROUND UP...
- New design crankcase, Performance is improved by adopting a new mould.
- New crankshaft by changing the counterweights from 4 to 5mm and optimising the weight balance, the feeling in low and mid-range power is improved.
- New 9-ports cylinder adapted to the new crankcase internal design.
- New look cooling-head changed from conventional black colour to polished silver with clear coating.
- New backplate with steel thrust plate.
- New main-needle design with double o-rings for more tuning stability.
- New shaped idle-needle for better torque in the low rpm area.
-
Specifications
Content: 3.49 cc
Bore: 16.08mm
Stroke: 17.20mm
HP: 2.8 ps / 2.76 hp at 33000 r.p.m.
Practical range: 4000-45000 r.p.m.
Weight: 340g -
-
O.S. SPEED R21 EURO...
£477.39IN STOCK NOW.
The BRAND NEW EUROSPEC II Motor from OS Engines.
(Price does NOT INCLUDE Pipe & Manifold.)- NEW CRANKSHAFT. Featuring an extra Tungsten counter balance weigh to improve mid range performance and 'return to idle' function.
- NEW LINER & PISTON. 7 ports (similar to Shimo II) for a smoother power delivery with increased torque. Exhaust side extra liner ports to improve piston cooling and a better heat distribution.
- New Head Graphics.
-
OS1FG01 O.S. SPEED R21...
£499.99We proudly present the O.S. SPEED R21 Shimo3 Edition, developed in collaboration with Takaaki Shimo, multiple podium finisher at the IFMAR 1/8 Racing World Championship.
This 9-port engine features a specially treated piston and a newly matched cylinder for enhanced durability and longer lifespan.
The LGC cooling head and 8.5mm carburettor restrictor are anodised in a distinctive colour exclusive to this edition.
Additional upgrades include a new Dust Cover Ring and Exhaust Spacers to fine-tune engine performance to your preference.
This package comes complete with the latest EFRA2196 tuned muffler and its MR05 manifold, making it a truly special edition for performance enthusiasts. -
-
-
-
OS T1201-4 CERAMIC...
£56.65Genuine OS parts.
CERAMIC REAR BEARING
Suits all OS .12 motors from 1201 to 1204 -
-
-
