New Products
New Products
Home
Active filters
-
ULTI 1/12 Front Tyre J...
£20.00 £23.50ULTI 1/12 Front tyre J - Medium
1 x Pack of 3 pairs
PRICE ON EXISTING STOCK ONLY
-
ULTI 1/12 REAR TYRE J...
£20.00 £23.50ULTI 1/12 FRONT tyre J - SOFT
1 x Pack of 3 pairs
PRICE ON EXISTING STOCK ONLY
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
OFFICINARC TUNGSTEN...
£12.49OfficinaRC just never stops. The research of every detail is what drives us to improve, innovate and create new pieces for the RC world.
Today we introduce you the Tungsten Disco.
The Tungsten discs increase weight, balancing the car without compromising the tension of the frame.
With the unmistakable OfficinaRC refinement, much more than a simple component, customised, to give a touch of style to your model. They are made in 2 sizes: 7,5g and 15g. Their shape is designed to be stacked on top of each other in order to choose the appropriate weight.There is an internal thread so they can be easily screwed on. Thanks to the material used, they are heavy and take up half the space in order to have the setting of your dreams. More weight less space, simple!
-
MZ2005 PRECISION 'O'...
£7.49Precision "O" ring super smooth running (12 pcs).
FOR DIFF OUTDRIVE SHAFTS.
-
-
-
OFC-2814-T-L BALL STUD...
£7.495mm Thread Length
These parts replace the original ones by MUGEN(#A2814). 6mm Ball
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
-
-
ULTI Invincible 1/8th...
£18.99ULTI 'INVINCIBLE' 1/8th Tyres (2 x 32 equivalent to 35 equivalent Rear)
