New Products
New Products
Home
Active filters
-
-
-
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
MAXIMA R6 .21 ON-ROAD...
£455.99 £599.99ONE LEFT WITH MAXIMA MODIFIED BACK-PLATE
Maxima MX Europa have introduced their new .21 engine for 1/8 On-Road class, the Maxima Mx R6.
Over the past years several tests have been done with Mx R2 and Mx R4 to get to the R6,
with all the quality standard of our engines and overall performance regarding torque and runtime.The Mx R6 is based on O.S Speed R2103 with special factory modifications to Crankshaft, Liner and
Piston and comes 'Pre-Run' to shorten the running in process by half!
Main Features:
Lower Centre of gravity for better handling
• A second inner button head allows for finer tuning to meet track conditions
• New ceramic rear bearing reduces friction loss
• Compatible with 16% nitro fuel, which complies with EFRA regulations
• Retains O.S Speed innovations such as DLC coating and tungsten weighted crank shaft
Power with Economy!
All motors are factory selected, tuned and modified by Maxima.PLEASE NOTE:
ALL MAXIMA MOTORS ARE SUPPLIED PRE-RUN USING OIL BATH METHOD (Not fully run-in) -
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
-
PRO-103008C Project Rc...
£26.99PRO-RC SMALL INS-BOX Air Filter and Intake Silencer.
Suits all .21/.12 On-Road motors.
-
PRO-834 MRX7 BATTERY...
£18.99ALTERNATIVE BATTERY HOLDER FOR MRX7 TO ALLOW FOR ADDITIONAL WEIGHTS.
IDEAL FOR EASILY TUNING THE CAR'S HANDLING.
SUPPLIED WITHUT WEIGHTS.
-
PRO-834-40 BATTERY...
£51.99PROJECTRC BRASS BATTERY TRAY 40g.
Can also be used with Brass and Tungsten Flat weights (for C/FDue early June.
-
-
-
-
PRO-839 LexaBond Lexan...
£26.99LEXABond Complete Kit has been specifically developed for bonding Lexan, offering a strong, precise and reliable adhesion even in the most extreme applications.
Designed for the world of RC modelling and for professional technical uses, it guarantees a high strength hold while maintaining good flexibility, a fundamental characteristic for absorbing vibrations, impacts and deformations without cracking.
The special LEXABond formula allows for a quick, strong and slightly flexible bond, ideal for RC bodies, reinforcements, details and repairs, ensuring maximum durability even in the most demanding conditions.
-
PRO-840 Titanium Gr. 5...
£24.50Introducing our new engine mount fixing screws, specifically designed to deliver maximum strength and reliability in RC racing applications.
Manufactured from solid Titanium Gr.5 billet, these are not standard off-the-shelf screws, but components purpose-developed for this exact application.
The design features an unthreaded section near the screw head, precisely the area working in contact with the chassis.
This solution increases the contact surface and significantly improves rigidity and clamping stability under extreme stress and vibration.
The special low-profile head does not protrude from the chassis, ensuring perfect screw integrity and preventing damage caused by contact with the asphalt during use. -
PRO-H2247 2-SPEED...
£26.99PROJECTRC gearbox adapter, also compatible with the original gearbox axle. High-strength treated steel for longer life
Combined with the PRO-H2248 code it guarantees a more precise and long-lasting assembly of the parts thanks to an improved interlocking between the parts.
Due early June.
-
PRO-H2248 Aluminium...
£26.40Gearbox axle for Mugen Mrx7 with optimized hexagon profile for better coupling between the parts.
-
Project RC Brake Disk...
£33.99IN STOCK.
From Project RC comes the NEW Brake Disc dedicated to the Mugen MRX-6 and MRX7.
Developed with a completely different material than the original to offer superior performance in all conditions.
-
PRO-H2327 SERVO SAVER...
£39.99Ergal servo saver with interchangeable carbon inserts to adjust the Ackermann angle.
The Ergal construction ensures increased safety and delivers a more precise and responsive steering feel.
-
-
PRO-H2428-OPT REAR...
£49.99This rear carbon body mount, compared to the original one, provides greater stability, especially in high-speed corners.
The upper inserts of the mount keep the rear body fins firmly in place, ensuring consistent and efficient aerodynamics in every driving phase.
-
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
