New Products
New Products
Home
-
Highest B210 (Torque)...
£149.99Highest B210 (Torque) Servo
Highest Servo's are used by some of the best drivers on the planet including our own Jorn Neumann and Olly Jefferies, plus David Ronnefalk and Ronald Volker.
A high torque brushless servo mainly for 1/8th buggy class and 1/8th On-Road.
Specifications
- High Efficiency Brushless Motor- Full Aluminium Case
- Full Metal Gears-POWER GEAR
- Output Shaft 25T
- Dynamic Torque (6.0V) : 24.5 kg-cm
(7.4V) : 31.1 kg-cm
- Operating Speed (6.0V) : 0.12 sec/60°
(7.4V) : 0.09 sec/60°
- Operating Temperature 14° to 140° F (-10 to +60° C)
- Operating Voltage 6.0V~7.4V
- Size 39.5 * 20.0 * 38.7 mm
- Weight 73.1g
-
HOBBYWING XERUN XR10...
£32.00 £44.99Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.
ONE ONLY AT THIS PRICE.
Specification:
Cont./Peak Current - 60A/380A
Motor Limit - Sensored / Sensorless Brushless Motor
Applications - 1/10, 1/12 on-road & off-road CLUB competition and normal training
(Motor) KV Limit - Brushless Motor Limit 2S LiPo/4-6S NiMH: 8.5T (1/10 on-road), 11.5T (1/10 off-road)
Brushless Motor Limit 3S LiPo/8-9S NiMH:13.5T (1/10 on-road), 17.5T (1/10 off-road) .LiPo/NiMH Cells - 2-3S LiPo/4-9S NiMH
BEC Output - 6V, 2A (Line-mode BEC)
Fan (Included) - Powered by the stable BEC output voltage of 6V
Connectors - Input End: No, Output End: No.
Size/Weight (mm/g) - 33.5mm(L) x 28.5mm(W) x 30.5mm(H) / 59.8g
-
XERUN XR10 JUSTOCK G3
£61.99Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.
Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.
Built-in capacitor module
The built-in capacitor module eliminates the need for external capacitors and unwanted space.
RPM speed limit function
The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.
Zero timing competition design
The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.
Built-in BEC supporting high-voltage steering gear
The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
User-friendly and convenient for set-up
The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.
Protection functions
The various protection functions have greatly improved the reliability and durability of the ESC.
Single programming and RESET design button
The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.
Support bi-directional motor movement
The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.
Support ESC firmware upgrade
Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A
Wires & Connectors
Input Wires - Black-14AWG-200mm*2
Output Wires - Black-14AWG-200mm*3
Input Connectors - No
Output Connectors - No
Fan
Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC
ESC Programing via
SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate
Firmware
Firmware Upgrade - Supported
Size & Weight
Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)
Applications
Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10thTouring Cars & Buggies for Racing
KV Rating/T Count - ≥10.5T 3650 Motor -
XERUN XR10 JUSTOCK G3S
£54.99The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions.
This speed control is NOT BRCA legal for 2024 Nationals in the control 17.5T or FWD class.
Control products for that class are HW30112003, HW38020321, HW30408011 Fan intelligent start and stop function When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.
Freewheeling Feature With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners. Built-in polarity protection One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals.
Multi RPM limit, select as needed Supports 79RPM Limits （10000-88000RPM）RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world. Built-in capacitor module, optimized layout The built-in capacitor module eliminates the need for external capacitors and unwanted space.
Built in BEC The ESC has a built-in BEC which can support a maximum output current of up to 8A. The output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
Built-in data logging function The ESC has a built-in data recording function making it easy to obtain the operating status. The data includes; Minimum voltage Maximum ESC temperature Maximum current Maximum motor temperatureMaximum RPM Wireless connection for data recording and analysis After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions.
Note: Due to the Bluetooth transmission distance, the effective distance is about 5m! Parameters optimized It is tailored and are more in line with competition needs.
Type Scale - 1/10th Brushed/Brushless - BL Sensored/Sensorless - SD Waterproof - No Specifications Cont./Peak Current - 60A/380A Input Voltage - 2S LiPo BEC Output - 6V/7.4V @4A Wires & Connectors Input Wires - Black-14AWG-200mm*1 Red-14AWG-200mm*1 Output Wires - Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1 Input Connectors - No Output Connectors - No Fan Size - 25x25x10mm Output Wires - 5-7.4V Input Connectors - Powered by BEC -
-
-
XERUN XR10 Pro Black G3
£184.00 £209.99We are moving premises at the end of May this year and we are doing 'stock rotation' at the moment.
Keep an eye out for more special offers...on existing stock only
Introducing from Hobbywing the XR10 G3 Competition Speed Control.
HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.
HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.
-
XERUN XR10 Pro GREY G3
£184.00 £209.99We are moving premises at the end of May this year and we are doing 'stock rotation' at the moment.
Keep an eye out for more special offers...on existing stock only
.HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.Introducing from Hobbywing the XR10 G3 Competition Speed Control.
HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.
-
HOBBYWING XERUN XR10...
£117.00 £129.99Special Design for 1/12th Scale Top Racing
Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to 1/12th scale top touring car racing.
High reliable heat dissipation system
Internal power board covered with copper heat conducting confluence strip which is HobbyWing’s patent technology. The strip is convenient for transferring the internal heat rapidly to an integrated shell radiator, together with a high-speed heat dissipation fan, which build a high reliability heat dissipation system, to ensure the ESC is always in the best state of heat dissipation.
Super BECInternal BEC features booster circuitry can output the current/voltage of up to 6A/6V and power various servos without connecting any extra receiver battery.
Built-in Electronic Switch & Capacitor Module
Built-in electronic switch (with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design) and capacitor module save space and make the wiring simple and neat.
Programming/Upgrading/Data Reading Wirelessly
With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Separate Programming/Fan Port
The separate PRG/FAN port on the ESC can power an external fan to maximise cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.
Innovative Data-logging Function
This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box to analyse .
Scale - 1/12th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 120A/830A
Input Voltage - 1S Lipo/3-4 Cell NiMH
BEC Output - Switch Mode: 6V@3A
-
XERUN - V10 - 13.5T...
£99.99 £104.99Introducing the Hobbywing XeRun V10 G4.
Built for the ultra competitive Stock racing, the V10 G4 has been tested and developed together with World and European champions.
This new generation has been greatly optimised with the stator being redesigned for higher efficiency and is equipped with ultra high grade custom magnetic ring rotor for maximum torque and increasing the output power by 5%.
The internal resistance has also been reduced by about 4% resulting in a more efficient and cooler temperature of the motor.
The motor adopts a full exposed stator core and is directly exposed to the air for excellent heat dissipation.
The outer diameter is maximised to increase the stator heat dissipation area by 25.6% compared to the V10 G3R motor.
The motor is equipped with a high-precision end bell plate that uses high quality structural components to greatly improve the consistency and structural stability of the power output at all times.
The V10 G4 adopts a modular structural design which is convenient for maintenance which prolongs the service life of the motor.
Specifications
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2
Relevant Parameters
KV Rating - 3950
LiPo Cells - 2-3S
No-load Current(A) - 4.5
Size & Weight
O.D.(mm) - 35.8
Length (mm) - 51.4
Shaft Diameter (mm) - 3.175
Weight (g) - 149
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4
Timing
30-60 Degrees(Adjustable)
Applications - 1/10th STOCK Class Racing -
XERUN V10 13.5T BLACK...
£94.99 £104.99*BRCA & EFRA Approved*
The new G4R stator and winding design reduces the overall internal resistance,
while maintaining the requirements for sanctioning spec class rules.
The improved motor efficiency reduces the temperature rise to
keep internal resistance numbers consistent.
The motor adopts an open core can, and uses an all new Rotor.
This allows the heat generated by the stator to be directly cooled by airflow.
The can and rotor design allows airflow through the motor to
maximise the cooling. -
-
-
-
-
JUSTOCK...
£98.99 £109.99REQUIRED FOR BRCA 17.5 TOURING CAR COMPETITION 2024
AVAILABLE EARLY MARCH '24
Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.
Built-in capacitor module
The built-in capacitor module eliminates the need for external capacitors and unwanted space.
RPM speed limit function
The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.
Zero timing competition design
The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.
Built-in BEC supporting high-voltage steering gear
The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
User-friendly and convenient for set-up
The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.
Protection functions
The various protection functions have greatly improved the reliability and durability of the ESC.
Single programming and RESET design button
The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.
Support bi-directional motor movement
The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.
Support ESC firmware upgrade
Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A -
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
