New Products
New Products
Home
Active filters
-
-
-
-
-
OS 21XZ Wrist-pin OS...
£5.39- VSR01
- VSR02
- VSPTO01
- VSM01
- OS R2101
- OS R2102
- OS R2103
- OS R2104
OS R2105 - OS R21 EURO (I & II)
- OS 21XZ-R
OS 21XZ-GT
Length: .53" (13.5mm)
Diameter: .16" (4mm) -
-
-
OS SPEED R2104...
£172.99NEW OS2104 Liner, Piston and ConRod Assembly.
Displacement: 3.49 cc
Bore: 16.08 mm
Stroke: 17.2 mm -
OS2DA07000 Rear Cover...
£27.99BACK-PLATE FOR ALL OS BASED ENGINES. A 'No Brainer!'
STEEL INSERT (Replaceable) -
CENTRO MINI ELECTRIC...
£59.99A must have for any pit box is the mini electric intelligent soldering iron from Centro! It is perfect for all your soldering requirements and ready to use in just over 10 seconds. It features an OLED display for the adjustable temperature range depending on the job in hand.
Simple connectivity to 12-24V DC power and a selection of optional power leads provides users with a host of ways to power up the iron. A selection of optional tips are available for you to fine tune your soldering depending on the job, making the mini pit iron as versatile as they come.Centro Mini Electronic Intelligent Soldering Iron Features:
-
Ready to use in 10-15 seconds
-
OLED Display
-
Adjustable Temperature Range
-
12-24V DC Input Voltage
-
Optional Tips Available
-
Compact and portable
-
Includes Sloped tip, power cable & stand
Spec Check:
-
65W power output @24v
-
Temperature stability - ±2%
-
Temperature Range - 100°C - 400°C (max)
Safety instructions:
-
Ensure that you use the correct power supply and accessories
-
Do not touch the tip of the soldering iron after the temperature has risen to avoid burns
-
Before replacing the soldering iron tip, you must turn off the power and wait for the soldering iron to cool down
-
-
-
-
CENTRO MINI SOLDERING...
£5.99Makes it easy to carry your soldering iron to every meeting.
Case contents shown are not supplied with case. -
MR33 ALUMINIUM MOON...
£25.99MR33 Moon Style High Speed Aluminium Fan for the perfect motor cooling.
The fan has a rounded top aluminium housing for a very long life and a very cool look.
In addition, the fan has a high speed for the perfect cooling of your motor!
Cable length (to plug): 165mm
The MR33 Moon Style fans are available in 30mm and 40mm versions.
MR33-AMCF-30 MR33 Aluminum Moon Style High Speed Fan 30mm
MR33-AMCF-40 MR33 Aluminum Moon Style High Speed Fan 40mm -
-
-
7XC 7-Channel Surface...
£659.99 £759.99SPECIAL PRICE. 1 ONLY AT THIS PRICE
The T7XC was developed for car/boat modellers who want a premium stick style radio for land and water based modelling. The technology inside is largely based on the well known T7PX with some new features and this stylish new ergonomic case shape.
The case is made from high quality moulded plastic and finished in a stunning deep satin black, accented by chrome mouldings and switches. The huge 4.3" colour touch screen has a 'transflective' surface for great visibility indoors and out. The screen is easy to use and responds quickly to the touch. There is also a jog dial if you prefer to navigate that way.
Using Futaba's fastest technology 'T-FHSS SR' the response has a ultra-fast frame rate of 2.45 milliseconds! This new system brings in a locked in feel and response that racers and performance drivers will truly appreciate. The T7XC is also compatible with Futaba T-FHSS, S-FHSS and FASST so you can select the preferred transmission system for each car to suit your requirements and budget. With T-FHSS telemetry the data can be displayed on the screen or relayed by a synthesised voice using the in-built speakers or headphones (not included).
The T7XC has the ability to update its software using an SD card but it also has NFC (Near Field Communication) which allows you to update the radio from an android phone just by opening an APP and placing it next to it! Just another way that Futaba is at the forefront of technology to make your hobby easier.
-
Highest B210 (Torque)...
£149.99Highest B210 (Torque) Servo
Highest Servo's are used by some of the best drivers on the planet including our own Jorn Neumann and Olly Jefferies, plus David Ronnefalk and Ronald Volker.
A high torque brushless servo mainly for 1/8th buggy class and 1/8th On-Road.
Specifications
- High Efficiency Brushless Motor- Full Aluminium Case
- Full Metal Gears-POWER GEAR
- Output Shaft 25T
- Dynamic Torque (6.0V) : 24.5 kg-cm
(7.4V) : 31.1 kg-cm
- Operating Speed (6.0V) : 0.12 sec/60°
(7.4V) : 0.09 sec/60°
- Operating Temperature 14° to 140° F (-10 to +60° C)
- Operating Voltage 6.0V~7.4V
- Size 39.5 * 20.0 * 38.7 mm
- Weight 73.1g
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
O.S. Glowplug Speed...
£14.00This special Speed version of the OS RP7 glowplug is plated in 24K gold. But the gold is not just for added for cosmetic 'bling' as the gold plating was chosen for its thermal characteristics in order to improve throttle response in medium and low speed ranges over a standard plug.
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
-
O.S. SPEED T1204 1CS00
£399.99Featuring improved torque at medium to low speeds, the throttle response has also been improved.
This has been achieved through a newly designed crankshaft with different counter weight shape which has had two tungsten weights installed for improve performance.
The cooling head has also been changed to improve cooling, while the button and its o-ring has been modified to prevent dust entering this area.
- New inner crankshaft.
- New Cooling-head increased cooling.
- New combustion chamber/o-ring.
New Pipe & Manifold: 1070SC(EFRA2672)/MT03
Type : Touring Contents : .12(2.11cc) Bore : 13.67mm Stroke : 14.30mm Crankshaft : DLC/TUNG/SIL 12mm SG/SPT Main Bearing : 12mm Ceramic Front Bearingt : 7mm HighSpeed Cylinder type : ABC Ports : 3 Exhaust : 1 Carburator : 12F5(B) with 5.5mm venturi Cooling-Head : 48mm/6 ribs Underhead : for glowplugs Conical/Turbo RMP : Max Power @ 33K RPM (5-45K RPM range) Weight : 215Gr -
O.S. SPEED R2105
£469.99New OS Speed R2105 IN STOCK NOW
Features:- NEW FROM THE GROUND UP...
- New design crankcase, Performance is improved by adopting a new mould.
- New crankshaft by changing the counterweights from 4 to 5mm and optimising the weight balance, the feeling in low and mid-range power is improved.
- New 9-ports cylinder adapted to the new crankcase internal design.
- New look cooling-head changed from conventional black colour to polished silver with clear coating.
- New backplate with steel thrust plate.
- New main-needle design with double o-rings for more tuning stability.
- New shaped idle-needle for better torque in the low rpm area.
-
Specifications
Content: 3.49 cc
Bore: 16.08mm
Stroke: 17.20mm
HP: 2.8 ps / 2.76 hp at 33000 r.p.m.
Practical range: 4000-45000 r.p.m.
Weight: 340g -
-
O.S. SPEED R21 EURO...
£477.39IN STOCK NOW.
The BRAND NEW EUROSPEC II Motor from OS Engines.
(Price does NOT INCLUDE Pipe & Manifold.)- NEW CRANKSHAFT. Featuring an extra Tungsten counter balance weigh to improve mid range performance and 'return to idle' function.
- NEW LINER & PISTON. 7 ports (similar to Shimo II) for a smoother power delivery with increased torque. Exhaust side extra liner ports to improve piston cooling and a better heat distribution.
- New Head Graphics.
-
OS1FG01 O.S. SPEED R21...
£499.99We proudly present the O.S. SPEED R21 Shimo3 Edition, developed in collaboration with Takaaki Shimo, multiple podium finisher at the IFMAR 1/8 Racing World Championship.
This 9-port engine features a specially treated piston and a newly matched cylinder for enhanced durability and longer lifespan.
The LGC cooling head and 8.5mm carburettor restrictor are anodised in a distinctive colour exclusive to this edition.
Additional upgrades include a new Dust Cover Ring and Exhaust Spacers to fine-tune engine performance to your preference.
This package comes complete with the latest EFRA2196 tuned muffler and its MR05 manifold, making it a truly special edition for performance enthusiasts. -
-
-
-
OS T1201-4 CERAMIC...
£56.65Genuine OS parts.
CERAMIC REAR BEARING
Suits all OS .12 motors from 1201 to 1204 -
-
-
-
OSSPEED OS21 CONROD...
£39.90R2101/2/3/4/5 & MAXIMA R6
With 3 Piston Circlips
- VSR01
- VSR02
- VSPTO01
- VSM01
- OS R2101
- OS R2102
- OS R2103
- OS R21 EURO
- OS 21XZ-R
OS 21XZ-GT
Length: .53" (13.5mm)
Diameter: .16" (4mm)
