New Products
New Products
Home
Active filters
-
-
-
-
-
-
-
ELCERAM OXIDE G2...
£197.99 -10% £219.99OXIDE 1/10 G2 is a new generation electronic speed controller for sensored Brushless DC motors.
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
NEON MTC - S2 - Kit
£198.00 £219.99MID OCTOBER DELIVERY
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car.
The NEON is already a proven winner at British BRCA National races.
It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast.
The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class. -
NEON MTC - CARBON...
£288.00 £319.99MID OCTOBER DELIVERY
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car.
The NEON is already a proven winner at British BRCA National races.
It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast.
The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class. -
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
Montech GT12 Body - MLGT3
£21.99Montech Racing has introduced the new MLGT3 body shell for 1/12th scale GT12 pan cars. The body is made of high-quality polycarbonate and due to a new moulding process it is very lightweight yet durable. The kit includes wing, window masks and rear wing mounting hardware and it is usable with almost every GT12 chassis.
BRCA Legal
Supplied Clear
-
-
MONTECH AKURA GT12...
£22.99Designed, like all the latest Mon-Tech products, with 3D modelling software, it was then checked with fluid dynamics software and made with CNC machines.
The company’s new industrial way to work allows them to develop highly detailed bodies, to control the airflow and aerodynamic performance, and to respect class rules. The body is produced from a durable 0.75 mm Lexan and is available in a standard and La Leggera lightweight version.
The kit includes headlight stickers, window masks and hardware to install the rear wing in two different positions to change the rear downforce.
Supplied clear.
BRCA Legal. -
Montech M-4 TC Body 190mm
£31.99From Mon-tech Racing the M-4 body shell for the 1:10 Electric Touring Car category.
Inspired by the sleek and aggressive lines of next-generation cars, the M-4 is based on the iconic German automotive brand.
Standard Weight.
-
-
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
SKYRC NITRO ENGINE HEATER
£22.99The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes
based on ambient temperature.
SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a
minimal of stress and wear on the engine. It help relieve the stress on the crank,
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth
engine start, with no stress on your starterbox. Fuel consumption is much less, as
you do not have to spend time warming up and adjusting your engine. A pre-heatet
glow-plug will increase the life of your plug. It is also perfect for break-in, as it
reduces the "pinch" on your new engine. You will experience that engine pre-heating
is a must. Most importantly, it will quickly pay for itself by increasing engine life and
performance!
Features:
MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures
without having to take the heater off. -
-
-
-
TOP DECK CONVERSION -...
£24.99The new Atom 2 Top Deck Conversion offers increased chassis stiffness. This new option part has the ability to achieve both improved rotation and corner speed. It does this while also offering improved stability and drivability, particularly in high traction conditions. Although different parts, we first brought and developed this concept for the 1/12 Eclipse range of cars, with fantastic results, transferring fantastically into GT12 too!
2 Option bags are available. U8148 catering for the kit Steel-Alloy chassis and U8157 for those using the Atom 2 C/F chassis (U8033).
A prototype was used at the final GT12 national this year to take TQ and the win. -
SHIMIZU D01J WET...
£44.99Chosen as the control tyre for the BRCA nationals since 2012.
A fantastic wet weather tyre, built with the D01J wet tyre, Schumacher Revlite wheel and yellow moulded insert.
The V3 version of the popular rain tyre is now manufactured by Schumacher as shipped from us from 04/12/2020.Increase in direct material cost beyond our control has unfortunately meant the price has had to rise. Performance should be similar or better than the V2 version. V3.1 Version has improved belting joint strength; on track performance is the same as V3 version.
Please note these tyres are very soft, do not rev a car hard when on a car stand, with no load on the tyres or stranded off track such as on the grass. This tyre is very soft and should only be used for wet or damp tarmac. It should not be used on dry tarmac.
