New Products
New Products
Home
Active filters
-
BLITZ YRS 'FWD' 190MM...
£21.99BLITZ YRS 190MM FOR FRONT WHEEL DRIVE.
0.7MM STANDARD
0.5MM L/WEIGHT
-
1/10 & 1/8 BODY HOLE...
£5.99HIGHLY RECOMMENDED.
IDEAL FOR STRENGTHENING BODY POST HOLES. EXRA STRONG ADHESIVE
Available for 1/10th (SMALL 6.5mm) and 1/8th (LARGE 8mm) Lexan bodies. -
CENTRO MINI ELECTRIC...
£59.99A must have for any pit box is the mini electric intelligent soldering iron from Centro! It is perfect for all your soldering requirements and ready to use in just over 10 seconds. It features an OLED display for the adjustable temperature range depending on the job in hand.
Simple connectivity to 12-24V DC power and a selection of optional power leads provides users with a host of ways to power up the iron. A selection of optional tips are available for you to fine tune your soldering depending on the job, making the mini pit iron as versatile as they come.Centro Mini Electronic Intelligent Soldering Iron Features:
-
Ready to use in 10-15 seconds
-
OLED Display
-
Adjustable Temperature Range
-
12-24V DC Input Voltage
-
Optional Tips Available
-
Compact and portable
-
Includes Sloped tip, power cable & stand
Spec Check:
-
65W power output @24v
-
Temperature stability - ±2%
-
Temperature Range - 100°C - 400°C (max)
Safety instructions:
-
Ensure that you use the correct power supply and accessories
-
Do not touch the tip of the soldering iron after the temperature has risen to avoid burns
-
Before replacing the soldering iron tip, you must turn off the power and wait for the soldering iron to cool down
-
-
-
CENTRO MINI SOLDERING...
£5.99Makes it easy to carry your soldering iron to every meeting.
Case contents shown are not supplied with case. -
MR33 ALUMINIUM MOON...
£25.99MR33 Moon Style High Speed Aluminium Fan for the perfect motor cooling.
The fan has a rounded top aluminium housing for a very long life and a very cool look.
In addition, the fan has a high speed for the perfect cooling of your motor!
Cable length (to plug): 165mm
The MR33 Moon Style fans are available in 30mm and 40mm versions.
MR33-AMCF-30 MR33 Aluminum Moon Style High Speed Fan 30mm
MR33-AMCF-40 MR33 Aluminum Moon Style High Speed Fan 40mm -
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
SKY RC B6ACNEO AC/DC...
£57.99Introducing the new SKY RC B6ACneo AC/DC Charger from SKY RC.
Beauty outside. Beast inside. Performance Punch. Packed with Style.
-
SK-600054-01 - Power...
£10.00SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack. -
-
