New Products
New Products
Home
Active filters
-
-
Hasi Tuned CONICAL...
£35.00Conical manifold that guarantees easy tuning and low fuel consumption. HT01
This is great for middle to fast tracks were there is normally high fuel consumption.
-
HT-017 HASI STEEL REAR...
£52.80Hasi Tuned Swiss Steel Rear Ball Bearing for On-Road Engine (14x25.4x6 mm)
-
-
HT-022 HASI TUNED...
£55.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
-
HASI TUNED PIPE EFRA...
£85.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
HARD COATED VERSION
-
HT-025 HASI 3.5CC...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HASI 3.5CC 0.2MM LINER...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HT-038-CONICAL...
£36.00A conical 90° version (Hard Coated) which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-038-CONICAL MANIFOLD
£32.00A conical 90° version which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-072 HASI SLEEVE...
£48.00The must-have tool on every tuner’s bench.
- More control.
- More precision.
-
HASI Tuned Rear Back...
£32.99After many tests, Hasi engines is proud to present its newest development.
The new backplate reduces friction, improves the flushing inside the crankcase and with that improves the torque in the bottom to mid rpm range. -
-
-
-
Hasi Tuned Special...
£18.99Hasi Tuned aluminium servo horn designed specifically for On-road (and some Off-road) cars.
By making the shape of the arm offset it is possible to achieve the maximum steering angle with a linear steering operation.
Fits Futaba, Savox Power 25t etc etc
-
HASI TUNED 'LOW...
£65.20New Low Profile Head by HASI TUNED, this head in addition to lowering the centre of gravity, due to a saving of 3.8 grams compared to the original.
These heads has been specially produced for engines with AAC liner, as it guarantees a faster and easier warm-up of the engine.
-
-
HASI TUNED MAIN JET...
£25.99Enlarged fuel window.
Enjoy a wider and more precise tuning range, making carburation faster, easier, and more stable under all conditions.
More control.
Less guesswork.
High-grade stainless steel construction Precision-machined for optimal fuel atomisation inside the carburetor, ensuring better efficiency and improved throttle response at high RPM.Full compatibility Direct fit for all OS 21M2 series carburettors.
📦 Now available as an optional upgrade for all OS-based engines.
THESE WORK!!! -
-
-
HT-078-9 HASI TUNED...
£11.89Hasi Tuned High Performance Venturi 9.00 mm Ultra Short Version
Fits all OS based carburettors.
Similar design to MAX engine short venturi. Immediate power increase. -
-
-
-
-
-
Hasi Tuned 7 PORT 2024/25
£439.99 £619.99SALE SPECIAL - 1 ONLY
- - New high dissipation and low density aluminium cooling head, to combine functionality and lightweight.
- - New crankshaft, with revised timing and balancing.
- - New piston and liner, 7 PORTS with high compression piston made from rod.
- - New reinforced 'GENUINE OS' conrod.
- - New type Low Profile head - RED.
Each engine will have its own dedicated sleeve, which will be perfectly honed inside the crankcase, avoiding dangerous vibrations; the design of the ports has been revised to combine performance and reliability.
COMES COMPLETE WITH 'PRE-RUN' (Proper running not oil bath!) + Hasi Special Back Plate
Like every Hasi engine, they are numbered one by one and accompanied by a certificate of guarantee and authenticity and the useful engine book.
-
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
SANWA MX-6 RADIO SET...
£89.99The all new SANWA MX-6 Radio is a fantastic 2.4GHz entry level transmitter and receiver set with the usual amazing SANWA quality.
Supplied with RX-391W Waterproof receiver.
The MX-6 has the basic functions you need like 10 model memory, dual rate, end point adjustment, sub trim and much more.
Compact, lightweight body.
New Transmission System "FH-E" MX-6 Main Functions
- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries) -
SANWA MT-5 RADIO SET...
£234.99 £289.99NEW SPECIAL LOW PRICE.
Compatible Response Mode with SUR, SSR, SHR, NOR SSL CODE5/CODE10
Function Quick Setup Wizard Fully Adjustable Trigger Adjustable Steering and Throttle Tension INDICATOR FUNCTION can show Receiver Signal Strength and Packet Delivery Ratio Weight: 382 g
Power source: AAA Battery x 3 ONLY Compatible RF with FH5 Includes new RX-493i receiver
One of the outstanding features of MT-5 is the indicator function which can check signal receiving conditions using RX-493i. The conditions can be used for checking the device and correct receiver placement.
-
SANWA MT-R RADIO SET...
£184.99 £229.99The latest Sanwa MT-R is the replacement for the much loved MT-S. A 2.4Ghz 4 channel radio for leisure and racing use, the best radio in its class? We think so!
High Resolution RF mode: FH5
Sanwa Ultra Response (SUR) Mode
SSL CODE 10 Compatible -
SANWA GEMINI SPORT...
£98.99 £149.99Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.
The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.
Specification (From MX-6)
- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)
-
-
SANWA RX-472...
£84.99 £99.99SANWA RX-472 Telemetry/SSL Receiver
- 2.4GHz FHSS4/FHSS3 Spread spectrum system 4ch
- Sanwa Synchronised Link ( SSL ) function support
- Sanwa Super Response (SSR) support
- Lightest receiver in class
Frequency - 2.4GHz FHSS4/FHSS3
Channel - 4ch
Nominal Input Voltage - 4.8~7.4V
Dimensions - 30.0x23.3x14.0mm
- 6.6g
Compatible radio - M12, EXZES Z, MT-4 ( SSL not support )
SSL Function (Sanwa Synchronised Link) System From using both of "RX-472" and "Super Vortex Zero", Drivers operate "Code AUX Function" which is included on M12 & EXZES-Z and can adjust setting of equipment directly and quickly from Radios.
In case of using SSL System, Drivers don't need to use Setting Card or PC. And also, Telemetry data can be sent to Radios without using any Sensors.
In case of using MT-4 with both of "RX-472" and "Super Vortex Zero", SSL Function is not responded, but Telemetry data can be sent to Radios without using any Sensors. -
SANWA RX-47T RECEIVER
£54.99 £69.99- 2.4GHz FHSS4 Spread Spectrum System 4CH
- Telemetry-Compatible
- SSL-Compatible (SUPER VORTEX ESC etc.)
- Super Response (SSR) Mode Compatible
- Lightest weight in the same class receivers
- Frequency - 2.4GHz FHSS4 - Nominal Input Voltage
- 3.7-7.4V - Weight - 6.6g
- Channel - 4CH
- Dimensions - 30.0x23.3x14.0mm
- Compatible radio - M12S, M12, EXZES ZZ, EXZES Z, MT-4S, MT-4(non-Compatible with SSL),MT-S- Do not cut antenna lead since it will decrease sensitivity.
-
SANWA RX-482 SSL RECEIVER
£49.99 £69.99RX-482 Telemetry/SSL Receiver
- 2.4GHz FHSS4 Spread spectrum system 4ch
- SSL support (ESC: Super Vortex Series etc.)
- Built-in Antenna
- Sanwa Super Response (SSR) supportFrequency - 2.4GHz FHSS4
Channel - 4ch
Nominal Input Voltage - 3.7V~7.4V
Dimensions - 18.2x24.4x27.1mm
Weight - 7.1g
Compatible radio - M12, Exzes Z, MT-4S, MT-4(No SSL support) -
SANWA RX-49T RECEIVER
£49.99For the SANWA M17, MT-5 and MT-R transmitters is this budget friendly receiver.
Specifications Compatible with FH5/FH5U (M17/MT-5/MT-R)
Compatible with SXR Response Mode
Compatible with SSL Function
Voltage: 4.8 - 7.4 V Water Proof (as IPX4) Antenna pipe
COAXIAL ANTENNA with Antenna Pipe*MT-5 indicator function is not compatible
-
SANWA RX-493 RECEIVER...
£84.99The RX-493 receiver includes coaxial antenna and pipe for greater range and more stability.
The RX-493 is compatible with FH5/FH5U system for M17 radio ONLY.
Compatible with SXR response mode.
Voltage 4.8-7.4v and water proof (as IPX4) Compatible with SSL function.
Easy install antenna pipe.
26x23.2x14mm
6.2g
Recommended pipe length 100mm -
SA107A54526A SANWA...
£84.99SSL Compatible
- Compatible with CODE10 (M12S (RS), Exzes ZZ, MT-44)
Not compatible with CODE5 (M12, Exzes Z, MT-4S, MT-4, MT-S)
- MULTI SETTING GEAR compatible
Not compatible with PGS SETTING GEAR
- SSR mode compatible
- SHR mode compatible
- Lipo 2 cell battery compatible
- High torque type
- Coreless motor
- Metal Gears
- AL Heat SinkProgrammable Servo to be compatible with SSL & Telemetry
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Multi Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Multi Setting Gear is necessary.- Setting Items
- SSL-CH (SSL Channel Setting) - STRETC (Stretcher Adjustment) - BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) - MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) - BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
- Multi Setting Gear is necessary for setting.Speed
0.11 sec / 60° (7.4 V)
0.13 sec / 60° (6.0 V)Torque
26.5 kg ·cm (7.4 V)
23.3 kg ·cm (6.0 V)Dimensions
40.5 X 20.5 X 37.2 mmWeight
59 g -
SANWA PGS-HR Servo...
£109.99SANWA PGS-HR Servo
- Digital Servo
- Coreless Motor
- Full metal gear
- LiPo (1 & 2cell)
- PGS SETTING GEAR-COMPATIBLE
Speed
0.10 sec / 60° (6.0 V)
0.16 sec / 60° (3.7 V)
Torque
3.8 kg·cm (6.0 V)
5.8 kg·cm (3.7 V)
Dimensions
27.0 x 21.1 x 30.5 mm
Weight
24 g -
