New Products
New Products
Home
Active filters
-
-
-
-
-
ARROWMAX Tools Base V2...
£55.99ARROWMAX Tools Base V2 BLACK & GOLD.
You'll never know how you did without one!!!! -
-
-
-
MULTI SHOCK CLAMP - V3...
£33.99NEW Arrowmax Shock Clamp Tool.
NEVER build your shocks without this tool. Now with Nylon Insert Jaws for Shock Shaft Protection.
-
ARROWMAX HONEYCOMB...
£365.99ARROWMAX HONEYCOMB TOOL SET WITH TOOL BAG
Honeycomb Tool Set with Tool Bag - 21pcs
Arrowmax Honeycomb tool set including the following tools;
AM410115 - ALLEN WRENCH 1.5 X 120MM Honeycomb
AM410120 - ALLEN WRENCH 2.0 X 120MM Honeycomb
AM410125 - ALLEN WRENCH 2.5 X 120MM Honeycomb
AM410130 - ALLEN WRENCH 3.0 X 120MM Honeycomb
AM420120 - BALL DRIVER HEX WRENCH 2.0 X 120MM Honeycomb
AM420125 - BALL DRIVER HEX WRENCH 2.5 X 120MM Honeycomb
AM420130 - BALL DRIVER HEX WRENCH 3.0 X 120MM Honeycomb
AM430130 - FLAT HEAD SCREWDRIVER 3.0 X 150MM Honeycomb
AM430158 - FLAT HEAD SCREWDRIVER 5.8 X 100MM Honeycomb
AM440135 - PHILLIPS SCREWDRIVER 3.5 X 120MM Honeycomb
AM440158 - PHILLIPS SCREWDRIVER 5.8 X 120MM Honeycomb
AM450150 - NUT DRIVER 5.0 X 100MM Honeycomb
AM450155 - NUT DRIVER 5.5 X 100MM Honeycomb
AM450170 - NUT DRIVER 7.0 X 100MM Honeycomb
AM490003 - REAMER WITH END CAP FOR LEXAN BODY Honeycomb
AM490021 - ARM REAMER 3.0 X 120MM Honeycomb
AM490023 - ARM REAMER 4.0 X 120MM Honeycomb
AM190008 - TURNBUCKLE WRENCH 3MM V2
AM190009 - TURNBUCKLE WRENCH 4MM V2
AM190010 - TURNBUCKLE WRENCH 5MM V2
AM190025-G - MULTI SHOCK-CLAMP V2 ( Gray )
AM199401 - AM EMBROIDERY TOOL BAGAn Ideal Starter Toolkit
-
-
ARROWMAX 'FAST FUEL GUN'
£31.00Built for ultra-fast refuelling, the fast fuel gun stands out as the trigger orientation that makes refuelling more ergonomic.
The materials used on the grip have been tested extensively over a
period of time with Arrowmax factory drivers to ensure mechanics get the best grip during refuelling. -
-
ARROWMAX B/G WRENCH SET
£80.00ARROWMAX BLACK/GOLDEN ALLEN WRENCH SET
Allen Wrench Set... 1.5mm/2mm/2.5mm/3mm
-
-
-
AM Lipo 6000mAh - 3.7V...
£29.99Arrowmax have introduced a dedicated transmitter battery pack for the Sanwa M17 radio. The 3.7V 6000mAh LiPo replaces the standard battery with a high-capacity pack for longer operation time and thus more confidence even when having long days at the track. The battery measures 86x44.5x10.5mm and it comes pre-wired with a universal JR-style plug.
v2 version, new dimensions for perfect fit.
-
AEROX PRO CHASSIS TAPE
£37.49This AEROX Pro Chassis Tape is designed to stick to the bottom of your chassis for carpet racing.
It has an incredibly low friction coefficient and allows the car to glide across the carpet and provide smoother handling characteristics.
It contains a special surface layer that prevents any pick up of additive or rubber from the track surface, meaning the car will stay consistent throughout the run.100mm width to easily fit standard touring car chassis, but can easily be used on LMP12 chassis.
Extremely long roll to use again and again, a one time purchase. Long enough for approximately 25 Touring Car chassis.
Directions for Use
- Ensure chassis is clean (brake cleaner) and dust free before application.
Carefully place over chassis and cut to size using a sharp blade.
- The tape should not need cleaning after running, the special surface can be damaged with brake cleaner type substance. -
-
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
Montech GT12 Body - MLGT3
£21.99Montech Racing has introduced the new MLGT3 body shell for 1/12th scale GT12 pan cars. The body is made of high-quality polycarbonate and due to a new moulding process it is very lightweight yet durable. The kit includes wing, window masks and rear wing mounting hardware and it is usable with almost every GT12 chassis.
BRCA Legal
Supplied Clear
-
-
MONTECH AKURA GT12...
£22.99Designed, like all the latest Mon-Tech products, with 3D modelling software, it was then checked with fluid dynamics software and made with CNC machines.
The company’s new industrial way to work allows them to develop highly detailed bodies, to control the airflow and aerodynamic performance, and to respect class rules. The body is produced from a durable 0.75 mm Lexan and is available in a standard and La Leggera lightweight version.
The kit includes headlight stickers, window masks and hardware to install the rear wing in two different positions to change the rear downforce.
Supplied clear.
BRCA Legal. -
Montech M-4 TC Body 190mm
£31.99From Mon-tech Racing the M-4 body shell for the 1:10 Electric Touring Car category.
Inspired by the sleek and aggressive lines of next-generation cars, the M-4 is based on the iconic German automotive brand.
Standard Weight.
-
PG Muffler Glove
£12.99
Special protective grease resistant to high temperatures.
Apply to the surface of the exhaust pipe and the manifold.
All the rubber and dust residues that will be attached can
be easily removed with a simple cloth and without any difficulty.One application is enough even for a full day, just do not remove the
product from the exhaust.
