New Products
New Products
Home
Active filters
-
-
-
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
PIP Aero APEX Body 1/8...
£29.00 £33.00German bodyshell producer PIP-Aero has released a new addition to its range with the Apex 1:8 Onroad Body.
The body comes to fruition after a whole season of testing on various tracks around the world, with the company making ‘many many mould changes' before arriving at the point they exactly wanted.
The body offers very direct on steering with fast corner speed in both fast and slow corners, and benefits from decreased drag on main straight.
-
PRO-103008C Project Rc...
£26.99PRO-RC SMALL INS-BOX Air Filter and Intake Silencer.
Suits all .21/.12 On-Road motors.
-
PRO-834 MRX7 BATTERY...
£18.99ALTERNATIVE BATTERY HOLDER FOR MRX7 TO ALLOW FOR ADDITIONAL WEIGHTS.
IDEAL FOR EASILY TUNING THE CAR'S HANDLING.
SUPPLIED WITHUT WEIGHTS.
-
PRO-834-40 BATTERY...
£51.99PROJECTRC BRASS BATTERY TRAY 40g.
Can also be used with Brass and Tungsten Flat weights (for C/FDue early June.
-
-
-
-
PRO-839 LexaBond Lexan...
£26.99LEXABond Complete Kit has been specifically developed for bonding Lexan, offering a strong, precise and reliable adhesion even in the most extreme applications.
Designed for the world of RC modelling and for professional technical uses, it guarantees a high strength hold while maintaining good flexibility, a fundamental characteristic for absorbing vibrations, impacts and deformations without cracking.
The special LEXABond formula allows for a quick, strong and slightly flexible bond, ideal for RC bodies, reinforcements, details and repairs, ensuring maximum durability even in the most demanding conditions.
-
PRO-840 Titanium Gr. 5...
£24.50Introducing our new engine mount fixing screws, specifically designed to deliver maximum strength and reliability in RC racing applications.
Manufactured from solid Titanium Gr.5 billet, these are not standard off-the-shelf screws, but components purpose-developed for this exact application.
The design features an unthreaded section near the screw head, precisely the area working in contact with the chassis.
This solution increases the contact surface and significantly improves rigidity and clamping stability under extreme stress and vibration.
The special low-profile head does not protrude from the chassis, ensuring perfect screw integrity and preventing damage caused by contact with the asphalt during use. -
PRO-H2247 2-SPEED...
£26.99PROJECTRC gearbox adapter, also compatible with the original gearbox axle. High-strength treated steel for longer life
Combined with the PRO-H2248 code it guarantees a more precise and long-lasting assembly of the parts thanks to an improved interlocking between the parts.
Due early June.
-
PRO-H2248 Aluminium...
£26.40Gearbox axle for Mugen Mrx7 with optimized hexagon profile for better coupling between the parts.
-
Project RC Brake Disk...
£33.99IN STOCK.
From Project RC comes the NEW Brake Disc dedicated to the Mugen MRX-6 and MRX7.
Developed with a completely different material than the original to offer superior performance in all conditions.
-
PRO-H2327 SERVO SAVER...
£39.99Ergal servo saver with interchangeable carbon inserts to adjust the Ackermann angle.
The Ergal construction ensures increased safety and delivers a more precise and responsive steering feel.
-
-
PRO-H2428-OPT REAR...
£49.99This rear carbon body mount, compared to the original one, provides greater stability, especially in high-speed corners.
The upper inserts of the mount keep the rear body fins firmly in place, ensuring consistent and efficient aerodynamics in every driving phase.
-
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
SANWA MX-6 RADIO SET...
£89.99The all new SANWA MX-6 Radio is a fantastic 2.4GHz entry level transmitter and receiver set with the usual amazing SANWA quality.
Supplied with RX-391W Waterproof receiver.
The MX-6 has the basic functions you need like 10 model memory, dual rate, end point adjustment, sub trim and much more.
Compact, lightweight body.
New Transmission System "FH-E" MX-6 Main Functions
- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries) -
SANWA MT-5 RADIO SET...
£234.99 £289.99NEW SPECIAL LOW PRICE.
Compatible Response Mode with SUR, SSR, SHR, NOR SSL CODE5/CODE10
Function Quick Setup Wizard Fully Adjustable Trigger Adjustable Steering and Throttle Tension INDICATOR FUNCTION can show Receiver Signal Strength and Packet Delivery Ratio Weight: 382 g
Power source: AAA Battery x 3 ONLY Compatible RF with FH5 Includes new RX-493i receiver
One of the outstanding features of MT-5 is the indicator function which can check signal receiving conditions using RX-493i. The conditions can be used for checking the device and correct receiver placement.
-
SANWA MT-R RADIO SET...
£184.99 £229.99The latest Sanwa MT-R is the replacement for the much loved MT-S. A 2.4Ghz 4 channel radio for leisure and racing use, the best radio in its class? We think so!
High Resolution RF mode: FH5
Sanwa Ultra Response (SUR) Mode
SSL CODE 10 Compatible -
SANWA GEMINI SPORT...
£98.99 £149.99Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.
The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.
Specification (From MX-6)
- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)
-
-
SANWA RX-472...
£84.99 £99.99SANWA RX-472 Telemetry/SSL Receiver
- 2.4GHz FHSS4/FHSS3 Spread spectrum system 4ch
- Sanwa Synchronised Link ( SSL ) function support
- Sanwa Super Response (SSR) support
- Lightest receiver in class
Frequency - 2.4GHz FHSS4/FHSS3
Channel - 4ch
Nominal Input Voltage - 4.8~7.4V
Dimensions - 30.0x23.3x14.0mm
- 6.6g
Compatible radio - M12, EXZES Z, MT-4 ( SSL not support )
SSL Function (Sanwa Synchronised Link) System From using both of "RX-472" and "Super Vortex Zero", Drivers operate "Code AUX Function" which is included on M12 & EXZES-Z and can adjust setting of equipment directly and quickly from Radios.
In case of using SSL System, Drivers don't need to use Setting Card or PC. And also, Telemetry data can be sent to Radios without using any Sensors.
In case of using MT-4 with both of "RX-472" and "Super Vortex Zero", SSL Function is not responded, but Telemetry data can be sent to Radios without using any Sensors. -
SANWA RX-47T RECEIVER
£54.99 £69.99- 2.4GHz FHSS4 Spread Spectrum System 4CH
- Telemetry-Compatible
- SSL-Compatible (SUPER VORTEX ESC etc.)
- Super Response (SSR) Mode Compatible
- Lightest weight in the same class receivers
- Frequency - 2.4GHz FHSS4 - Nominal Input Voltage
- 3.7-7.4V - Weight - 6.6g
- Channel - 4CH
- Dimensions - 30.0x23.3x14.0mm
- Compatible radio - M12S, M12, EXZES ZZ, EXZES Z, MT-4S, MT-4(non-Compatible with SSL),MT-S- Do not cut antenna lead since it will decrease sensitivity.
-
SANWA RX-482 SSL RECEIVER
£49.99 £69.99RX-482 Telemetry/SSL Receiver
- 2.4GHz FHSS4 Spread spectrum system 4ch
- SSL support (ESC: Super Vortex Series etc.)
- Built-in Antenna
- Sanwa Super Response (SSR) supportFrequency - 2.4GHz FHSS4
Channel - 4ch
Nominal Input Voltage - 3.7V~7.4V
Dimensions - 18.2x24.4x27.1mm
Weight - 7.1g
Compatible radio - M12, Exzes Z, MT-4S, MT-4(No SSL support) -
SANWA RX-49T RECEIVER
£49.99For the SANWA M17, MT-5 and MT-R transmitters is this budget friendly receiver.
Specifications Compatible with FH5/FH5U (M17/MT-5/MT-R)
Compatible with SXR Response Mode
Compatible with SSL Function
Voltage: 4.8 - 7.4 V Water Proof (as IPX4) Antenna pipe
COAXIAL ANTENNA with Antenna Pipe*MT-5 indicator function is not compatible
-
SANWA RX-493 RECEIVER...
£84.99The RX-493 receiver includes coaxial antenna and pipe for greater range and more stability.
The RX-493 is compatible with FH5/FH5U system for M17 radio ONLY.
Compatible with SXR response mode.
Voltage 4.8-7.4v and water proof (as IPX4) Compatible with SSL function.
Easy install antenna pipe.
26x23.2x14mm
6.2g
Recommended pipe length 100mm -
SA107A54526A SANWA...
£84.99SSL Compatible
- Compatible with CODE10 (M12S (RS), Exzes ZZ, MT-44)
Not compatible with CODE5 (M12, Exzes Z, MT-4S, MT-4, MT-S)
- MULTI SETTING GEAR compatible
Not compatible with PGS SETTING GEAR
- SSR mode compatible
- SHR mode compatible
- Lipo 2 cell battery compatible
- High torque type
- Coreless motor
- Metal Gears
- AL Heat SinkProgrammable Servo to be compatible with SSL & Telemetry
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Multi Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Multi Setting Gear is necessary.- Setting Items
- SSL-CH (SSL Channel Setting) - STRETC (Stretcher Adjustment) - BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) - MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) - BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
- Multi Setting Gear is necessary for setting.Speed
0.11 sec / 60° (7.4 V)
0.13 sec / 60° (6.0 V)Torque
26.5 kg ·cm (7.4 V)
23.3 kg ·cm (6.0 V)Dimensions
40.5 X 20.5 X 37.2 mmWeight
59 g -
SANWA PGS-HR Servo...
£109.99SANWA PGS-HR Servo
- Digital Servo
- Coreless Motor
- Full metal gear
- LiPo (1 & 2cell)
- PGS SETTING GEAR-COMPATIBLE
Speed
0.10 sec / 60° (6.0 V)
0.16 sec / 60° (3.7 V)
Torque
3.8 kg·cm (6.0 V)
5.8 kg·cm (3.7 V)
Dimensions
27.0 x 21.1 x 30.5 mm
Weight
24 g -
-
-
RC HAULER &...
£27.99BARGAIN OF THE YEAR....!
The Charger/Tool Bag from RC Overhaul offers a simple and versatile way to store an array of RC kit.
It's size makes it ideal to keep all the accessories that come in the box with your RTR vehicle (basic tools and chargers) so they don't get misplaced; or for those with a more extensive range of tools it can be a dedicated tool bag and with the included divider you can divide the space to best suit your needs.
The bag can accommodate multiple transmitters for safe storage or even a place to keep your SCX24! It perfectly fits into the RC Overhaul Hauler Bag offering a way to keep spares, tools, wheels and tyres neatly stored alongside your RC vehicle.Depending on your need you can fit 2 to 3 bags across the width depending on how much space is required for other things. Or you could fit a maximum of 9 bags into the Hauler for those looking to keep everything organised and tidy. It is made from a durable canvas material and fitted with a sturdy double zipped lid to contain the contents. The bag features a solid base to hold the 250x150mm footprint rigid, whilst the single included divider allow you to divide the space along the length at any point for keeping tools and chargers (of various sizes) separate. It comes flat packed and can be put together in a matter of seconds.
If you are looking to find a way to store an array of items, or just looking to keep together the extras that came with your RTR vehicle, the Charger/Tool Bag from RC Overhaul offers a simple and economically priced solution. -
WEiRC SPRING 3D BUMPER...
£8.99IN STOCK NOW!
3D BUMPER for MTC3 (Slightly less flexible than A2447)Not Aero' Design.
-
-
-
