New Products
New Products
Home
-
LENS GHIBLI 2.0 1/10...
£20.99 £26.99IN STOCK NOW
PASSED BRCA HOMOLOGATION 28/05/2024
Thanks to the experience of the best drivers in the category and after several hours of development and track tests, the Ghibli 2.0 is born!
The NEW GHIBLI 2.0 delivers better cornering due to the more tapered shape of the front wheel arches, and better grip thanks to the stiffening of the rear axle. The body shell contributes to an improvement in lap times, making driving more relaxing leaving you more concentration to improve your speed!
Available in STANDARD or LIGHTWEIGHT body weights.
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
SMD SRX SANWA...
£34.99SMD are proud to introduce their new Sanwa compatible SRX receiver.
Their new receiver is compatible with Sanwa M17, M12, M11x, MT-4, MT-4S, MT-S, MT-44, Exzes X, Exzes Z. Exzes ZZ, Gemini X.
The SMD SRX is a 4-channel receiver.
Measurements - 35.5mm × 23.3mm ×12.7 mm
Input voltage - 3.5V to 8.4V
Weight - 7.3 grams
Channels - 4
Modulation - FHSS-3/FHSS-4 -
SMD SRX 3 FH4 Sanwa...
£45.00This SMD SRX 3 receiver is Sanwa compatible with FHSS-4 and FHSS-3.
Features:
1. Sanwa compatible
2.4GHz FH3/FH4 Selectable Via Transmitter binding process 2. High performance CPU enhances precision control feeling
3. 4 channel support.
4. Micro size (Antenna-Free: 18.2x20.2x27.4mm).
5. Operating Voltage 3.5V - 8.4V:
6. Weight: 5g
7. Battery Voltage Fail-Safe Limit: 3.5-5.0V (FH3) / 3.5-7.4V (FH4) -
SMD SRX 3 FH5 Sanwa...
£45.00SND SRX3 Sanwa FH5 Compatible 4CH Antenna-free receiver.
Description:
The SMD SRX3 Sanwa2.4GHz 4-Channel FHSS5 compatible SSL Telemetry receiver uses a built-in antenna with exceptional range and response time.
With a lightweight design and a small footprint, this receiver is great for 1/10 and 1/12 scale electric RC cars.
This receiver is SSL compatible with either the Super Vortex or PGS Servos (Sold Separately).
Package includes one receiver and one bind plug. -
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
