New Products
New Products
Home
Active filters
-
-
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
CHARGE LEAD XH2S...
£9.992S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
-
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
MUGEN/YMC T SHIRT
£15.00MUGEN - YMC RACING UK 'T' SHIRTS.
High Quality T shirts made by GILDAN in 'Royal Blue'
Other colours special order. Contact us for details.
Available in Small, Medium, Large, and Extra Large. Other sizes to order.
Please note that colour may vary slightly on finished product. -
PG Muffler Glove
£12.99
Special protective grease resistant to high temperatures.
Apply to the surface of the exhaust pipe and the manifold.
All the rubber and dust residues that will be attached can
be easily removed with a simple cloth and without any difficulty.One application is enough even for a full day, just do not remove the
product from the exhaust. -
PG MUFFLER GLOVE SPRAY
£18.99P-Line Muffler Glove is a special protective grease resistant to high temperatures (-35°C +270°C).
Apply by spraying Muffler Glove generously directly onto the exhaust, simulating a paint job.
For best results, we recommend applying two coats of release agent).After use, any rubber residue that adheres can be easily removed with a simple cloth and without any effort.
One application lasts for more than 12 hours.
NO MORE HOURS SPENT CLEANING THE BURNT ON CRAP ON YOUR EXHAUSTS!A **MUST HAVE** for every nitro racers toolbox
Large 400ml spray can for ease of use. -
PG FAST CLEANER
£5.99The new benchmark in professional cleaning for RC micromotors arrives.
🎯P-Line Fast Cleaner – Code: PG16206 Designed by Pepe Group to meet the highest standards in the RC industry.
💥High-performance technical cleaner for internal and external use of micromotors:
✅Degreases deeply
✅Zero residues
✅Safe on silicones and plastics – designed not to damage them
✅Specific formula for the RC sector 🧪Tested to satisfy the most demanding professionals and pilots.
🚀600 ml format with constant high pressure delivery: maximum effectiveness from the first to the last spray.⚙️It's not just a degreaser. It's the ultimate technical cleaner for the RC world.
-
PRO-103008C Project Rc...
£26.99PRO-RC SMALL INS-BOX Air Filter and Intake Silencer.
Suits all .21/.12 On-Road motors.
-
PRO-834 MRX7 BATTERY...
£18.99ALTERNATIVE BATTERY HOLDER FOR MRX7 TO ALLOW FOR ADDITIONAL WEIGHTS.
IDEAL FOR EASILY TUNING THE CAR'S HANDLING.
SUPPLIED WITHUT WEIGHTS.
-
PRO-834-40 BATTERY...
£51.99PROJECTRC BRASS BATTERY TRAY 40g.
Can also be used with Brass and Tungsten Flat weights (for C/FDue early June.
-
-
-
-
PRO-839 LexaBond Lexan...
£26.99LEXABond Complete Kit has been specifically developed for bonding Lexan, offering a strong, precise and reliable adhesion even in the most extreme applications.
Designed for the world of RC modelling and for professional technical uses, it guarantees a high strength hold while maintaining good flexibility, a fundamental characteristic for absorbing vibrations, impacts and deformations without cracking.
The special LEXABond formula allows for a quick, strong and slightly flexible bond, ideal for RC bodies, reinforcements, details and repairs, ensuring maximum durability even in the most demanding conditions.
-
PRO-840 Titanium Gr. 5...
£24.50Introducing our new engine mount fixing screws, specifically designed to deliver maximum strength and reliability in RC racing applications.
Manufactured from solid Titanium Gr.5 billet, these are not standard off-the-shelf screws, but components purpose-developed for this exact application.
The design features an unthreaded section near the screw head, precisely the area working in contact with the chassis.
This solution increases the contact surface and significantly improves rigidity and clamping stability under extreme stress and vibration.
The special low-profile head does not protrude from the chassis, ensuring perfect screw integrity and preventing damage caused by contact with the asphalt during use. -
PRO-H2247 2-SPEED...
£26.99PROJECTRC gearbox adapter, also compatible with the original gearbox axle. High-strength treated steel for longer life
Combined with the PRO-H2248 code it guarantees a more precise and long-lasting assembly of the parts thanks to an improved interlocking between the parts.
Due early June.
-
PRO-H2248 Aluminium...
£26.40Gearbox axle for Mugen Mrx7 with optimized hexagon profile for better coupling between the parts.
-
Project RC Brake Disk...
£33.99IN STOCK.
From Project RC comes the NEW Brake Disc dedicated to the Mugen MRX-6 and MRX7.
Developed with a completely different material than the original to offer superior performance in all conditions.
-
PRO-H2327 SERVO SAVER...
£39.99Ergal servo saver with interchangeable carbon inserts to adjust the Ackermann angle.
The Ergal construction ensures increased safety and delivers a more precise and responsive steering feel.
-
-
PRO-H2428-OPT REAR...
£49.99This rear carbon body mount, compared to the original one, provides greater stability, especially in high-speed corners.
The upper inserts of the mount keep the rear body fins firmly in place, ensuring consistent and efficient aerodynamics in every driving phase.
-
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
