New Products
New Products
Home
Active filters
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
LRP 8000MAH - P4 1/12...
£64.99Our current Competition Car Line batteries are very popular amongst racers and are used around the world in many competition classes with great success. At the same time, they have gained a high level of acceptance and appreciation amongst the scene' s best drivers LRP batteries were the most used brand and at the IFMAR TC World Championship and got World Champion in the hands of Ronald Volker. With the new 2018 generation, battery technology gets a further boost. With Graphene-2 cells, we introduce the next step in Graphene development, resulting in more power and optimized weight!Graphene-2 lowers the internal resistance which leads to less heat build-up under load. This guarantees maximum performance over the complete duration of a race. The P4 1/12 Ultra LCG GRAPHENE-2 8000mAh Hardcase battery - 3.7V LiPo - 120C/60C stands out with:
- MAXIMUM CAPACITY
- STANDARD 1/12 SIZE
- 4MM CONNECTOR
BRCA/EFRA Approved
Length - 93.00mm
Width - 47.00mm
Height - 18.5mm
Weight - 158g
C-Rate - 120C/60C
4mm Plug
3C Charge Rate
Due to shipping Restrictions, this item is not available. Please email us for details.
-
LRP 6200MAH - P4 1/12...
£59.99Our current Competition Car Line batteries are very popular amongst racers and are used around the world in many competition classes with great success. At the same time, they have gained a high level of acceptance and appreciation amongst the scene's best drivers LRP batteries were the most used brand and at the IFMAR TC World Championship and got World Champion in the hands of Ronald Volker. With the new 2018 generation, battery technology gets a further boost. With Graphene-2 cells, we introduce the next step in Graphene development, resulting in more power and optimised weight!Graphene-2 lowers the internal resistance which leads to less heat build-up under load. This guarantees maximum performance over the complete duration of a race. The P4 1/12 Ultra LCG Stock Spec GRAPHENE-2 6200mAh Hardcase battery - 3.7V LiPo - 120C/60C stands out with:
- MAXIMUM POWER
- LOW WEIGHT
- STANDARD 1/12 SIZE
- 4MM CONNECTOR
BRCA/EFRA Approved
Length - 93.00mm
Width - 47.00mm
Height - 18.5mm
Weight - 150g
C-Rate - 120C/60C
4mm Plug
3C Charge Rate
-
LIPO 5000MAH-HV HYPER...
£53.99Introducing the new 2019 Competition Car Line Graphene 3 LiHV battery packs. Available as high-capacity Modified and ultra low internal resistance Stock packs, the batteries are available in the most popular configurations for on-road and off-road classes.
Graphene 3 - Cells
The next step in graphene developmentHyper LCG
New Low Centre of Gravity types availableTailor-made for stock and modified
Stock: Minimum IR = Maximum power
Modified: Max Capacity = Maximim RuntimeHV Technology
High voltage lipo cells - Charge up to 4.35v/cell
Increased lifetime when charged to 4.20v/cellBRCA/EFRA Approved from April 2019
Length - 139.00mm
Width - 47.00mm
Height - 17.5mm
Weight - 215g
C-Rate - 120C/60C
5mm Plug
-
LRP LIPO 6100MAH...
£82.99IDEAL FOR STOCK CLASSS.
Technical details:
- The 2020 batteries are ALL NEW cell constructions, they are not new stickers on the old batteries!!!
- The Graphene 4 batteries build on the bench mark Graphene 3 batteries, have higher capacity for both Modified and Stock types with Stock Spec batteries
also having higher power additionally.
Design:
- Design wise we continued the trend to a darker, more technical appearance which we started in 2019.
- Batteries still have the same see through blue case as in 2019.
BRCA Legal from April 2020
HV LCG STOCK SPEC GRAPHENE-4
#431281
Ideal weight for 1/10 TC racing combined with Low Center of Gravity design. Perfect car balance and power for tight tracks.
47 x 139 x 22.5g
273g
5mm plug -
LRP431282
£73.99Technical details:
- The 2020 batteries are ALL NEW cell constructions, they are not new stickers on the old batteries!!!
- The Graphene 4 batteries build on the bench mark Graphene 3 batteries, have higher capacity for both Modified and Stock types with Stock Spec batteries also having higher power additionally.
Design:
- Design wise we continued the trend to a darker, more technical appearance which we started in 2019.
- Batteries still have the same see through blue case as in 2019.
BRCA Legal from April 2020
HV ULTRA LCG MODIFIED GRAPHENE-4
#431282
Perfect car balance and power for tight modified tracks due to Ultra Low Center of Gravity design and reduced weight.
47 x 139 x 20mm
234g
5mm plug -
-
MH6001 Lower Alloy...
£14.99New MSE option part for MRX6R (1 Piece)
MH6001 - Lower aluminium shock mount MRX6R / Black anodised
Made from A7075 aluminium, this shock mount is extremely durable.
In case of an unlucky accident or harder impact it will mostly deform instead of breaking, compared to the original
graphite mount.
Made in Germany -
ALLOY SERVO SAVER TOP...
£28.50Replaces plastic servo saver top Part No: H2325A.
Sometimes if the countersunk m3 bolt is overtightened it can cause
the plastic to split.
This will not happen with this Optional part.To fit MRX6R and MRXRX only.
-
MH6006 REAR WEIGHTS...
£6.99MODIFIED REAR WEIGHT FOR MRX6X YMC
1 x Piece (2 needed)
MODIFIED TO ORDER
-
MH6010 Rear Carbon...
£32.95 £44.95MRX6 (6/6R/6X)
MH6010 – Rear Carbon Body Mount Set made by MSE Performance
PartsIn collaboration with Robert Pietsch we have developed a light weight
body mount
which fits perfectly under the most popular body shell.
Compared to the original one, this body mount is very stiff and through
its special shape it gives your MRX a very stable performance, especially
on high speed tracks.
The set is Made in Germany and includes all necessary parts. -
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
-
BODY STIFFENER SET C/F
£37.99Body Stiffener (centre, front, rear) 2.0mm Carbon/Fibre Kit.
To fit Xtreme Diable and Super Diablo etc
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
