New Products
New Products
Home
Active filters
-
LENS GHIBLI 2.0 1/10...
£20.99 £26.99IN STOCK NOW
PASSED BRCA HOMOLOGATION 28/05/2024
Thanks to the experience of the best drivers in the category and after several hours of development and track tests, the Ghibli 2.0 is born!
The NEW GHIBLI 2.0 delivers better cornering due to the more tapered shape of the front wheel arches, and better grip thanks to the stiffening of the rear axle. The body shell contributes to an improvement in lap times, making driving more relaxing leaving you more concentration to improve your speed!
Available in STANDARD or LIGHTWEIGHT body weights.
-
-
-
-
-
ARROWMAX Tools Base V2...
£55.99ARROWMAX Tools Base V2 BLACK & GOLD.
You'll never know how you did without one!!!! -
-
-
-
MULTI SHOCK CLAMP - V3...
£33.99NEW Arrowmax Shock Clamp Tool.
NEVER build your shocks without this tool. Now with Nylon Insert Jaws for Shock Shaft Protection.
-
ARROWMAX HONEYCOMB...
£365.99ARROWMAX HONEYCOMB TOOL SET WITH TOOL BAG
Honeycomb Tool Set with Tool Bag - 21pcs
Arrowmax Honeycomb tool set including the following tools;
AM410115 - ALLEN WRENCH 1.5 X 120MM Honeycomb
AM410120 - ALLEN WRENCH 2.0 X 120MM Honeycomb
AM410125 - ALLEN WRENCH 2.5 X 120MM Honeycomb
AM410130 - ALLEN WRENCH 3.0 X 120MM Honeycomb
AM420120 - BALL DRIVER HEX WRENCH 2.0 X 120MM Honeycomb
AM420125 - BALL DRIVER HEX WRENCH 2.5 X 120MM Honeycomb
AM420130 - BALL DRIVER HEX WRENCH 3.0 X 120MM Honeycomb
AM430130 - FLAT HEAD SCREWDRIVER 3.0 X 150MM Honeycomb
AM430158 - FLAT HEAD SCREWDRIVER 5.8 X 100MM Honeycomb
AM440135 - PHILLIPS SCREWDRIVER 3.5 X 120MM Honeycomb
AM440158 - PHILLIPS SCREWDRIVER 5.8 X 120MM Honeycomb
AM450150 - NUT DRIVER 5.0 X 100MM Honeycomb
AM450155 - NUT DRIVER 5.5 X 100MM Honeycomb
AM450170 - NUT DRIVER 7.0 X 100MM Honeycomb
AM490003 - REAMER WITH END CAP FOR LEXAN BODY Honeycomb
AM490021 - ARM REAMER 3.0 X 120MM Honeycomb
AM490023 - ARM REAMER 4.0 X 120MM Honeycomb
AM190008 - TURNBUCKLE WRENCH 3MM V2
AM190009 - TURNBUCKLE WRENCH 4MM V2
AM190010 - TURNBUCKLE WRENCH 5MM V2
AM190025-G - MULTI SHOCK-CLAMP V2 ( Gray )
AM199401 - AM EMBROIDERY TOOL BAGAn Ideal Starter Toolkit
-
-
ARROWMAX 'FAST FUEL GUN'
£31.00Built for ultra-fast refuelling, the fast fuel gun stands out as the trigger orientation that makes refuelling more ergonomic.
The materials used on the grip have been tested extensively over a
period of time with Arrowmax factory drivers to ensure mechanics get the best grip during refuelling. -
-
ARROWMAX B/G WRENCH SET
£80.00ARROWMAX BLACK/GOLDEN ALLEN WRENCH SET
Allen Wrench Set... 1.5mm/2mm/2.5mm/3mm
-
-
-
AM Lipo 6000mAh - 3.7V...
£29.99Arrowmax have introduced a dedicated transmitter battery pack for the Sanwa M17 radio. The 3.7V 6000mAh LiPo replaces the standard battery with a high-capacity pack for longer operation time and thus more confidence even when having long days at the track. The battery measures 86x44.5x10.5mm and it comes pre-wired with a universal JR-style plug.
v2 version, new dimensions for perfect fit.
-
AEROX PRO CHASSIS TAPE
£37.49This AEROX Pro Chassis Tape is designed to stick to the bottom of your chassis for carpet racing.
It has an incredibly low friction coefficient and allows the car to glide across the carpet and provide smoother handling characteristics.
It contains a special surface layer that prevents any pick up of additive or rubber from the track surface, meaning the car will stay consistent throughout the run.100mm width to easily fit standard touring car chassis, but can easily be used on LMP12 chassis.
Extremely long roll to use again and again, a one time purchase. Long enough for approximately 25 Touring Car chassis.
Directions for Use
- Ensure chassis is clean (brake cleaner) and dust free before application.
Carefully place over chassis and cut to size using a sharp blade.
- The tape should not need cleaning after running, the special surface can be damaged with brake cleaner type substance. -
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
-
-
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
MR33 BELT BOOSTER
£23.99MR33 BELT BOOSTER - 100ML
The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts. -
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
1/12 DOUBLE LEFT...
£12.99This new design left clamping Hub will fit any 1/12 axle on the market today.
These new hubs are designed to give a positive location to the wheel which when secured
will not twist or buckle. The double clamp screws also ensue the hub does not slip on the
axle and supports the hub to run true.This hub is wider than normal hubs so rear track width adjustment maybe required.
-
1/12 FRONT AXLE...
£5.50This Bearing Kit is for 1/12 racers.
Kit Contains:
1/8 x 5/16 Flanged 4pcs Front axle bearings610001
