New Products
New Products
Home
Active filters
-
HOBBYWING XERUN XR10...
£32.00 £44.99Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.
ONE ONLY AT THIS PRICE.
Specification:
Cont./Peak Current - 60A/380A
Motor Limit - Sensored / Sensorless Brushless Motor
Applications - 1/10, 1/12 on-road & off-road CLUB competition and normal training
(Motor) KV Limit - Brushless Motor Limit 2S LiPo/4-6S NiMH: 8.5T (1/10 on-road), 11.5T (1/10 off-road)
Brushless Motor Limit 3S LiPo/8-9S NiMH:13.5T (1/10 on-road), 17.5T (1/10 off-road) .LiPo/NiMH Cells - 2-3S LiPo/4-9S NiMH
BEC Output - 6V, 2A (Line-mode BEC)
Fan (Included) - Powered by the stable BEC output voltage of 6V
Connectors - Input End: No, Output End: No.
Size/Weight (mm/g) - 33.5mm(L) x 28.5mm(W) x 30.5mm(H) / 59.8g
-
XERUN XR10 JUSTOCK G3
£61.99Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.
Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.
Built-in capacitor module
The built-in capacitor module eliminates the need for external capacitors and unwanted space.
RPM speed limit function
The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.
Zero timing competition design
The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.
Built-in BEC supporting high-voltage steering gear
The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
User-friendly and convenient for set-up
The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.
Protection functions
The various protection functions have greatly improved the reliability and durability of the ESC.
Single programming and RESET design button
The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.
Support bi-directional motor movement
The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.
Support ESC firmware upgrade
Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A
Wires & Connectors
Input Wires - Black-14AWG-200mm*2
Output Wires - Black-14AWG-200mm*3
Input Connectors - No
Output Connectors - No
Fan
Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC
ESC Programing via
SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate
Firmware
Firmware Upgrade - Supported
Size & Weight
Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)
Applications
Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10thTouring Cars & Buggies for Racing
KV Rating/T Count - ≥10.5T 3650 Motor -
-
-
XERUN XR10 Pro Black G3
£184.00 £209.99We are moving premises at the end of May this year and we are doing 'stock rotation' at the moment.
Keep an eye out for more special offers...on existing stock only
Introducing from Hobbywing the XR10 G3 Competition Speed Control.
HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.
HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.
-
XERUN XR10 Pro GREY G3
£184.00 £209.99We are moving premises at the end of May this year and we are doing 'stock rotation' at the moment.
Keep an eye out for more special offers...on existing stock only
.HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.Introducing from Hobbywing the XR10 G3 Competition Speed Control.
HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.
-
HOBBYWING XERUN XR10...
£117.00 £129.99Special Design for 1/12th Scale Top Racing
Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to 1/12th scale top touring car racing.
High reliable heat dissipation system
Internal power board covered with copper heat conducting confluence strip which is HobbyWing’s patent technology. The strip is convenient for transferring the internal heat rapidly to an integrated shell radiator, together with a high-speed heat dissipation fan, which build a high reliability heat dissipation system, to ensure the ESC is always in the best state of heat dissipation.
Super BECInternal BEC features booster circuitry can output the current/voltage of up to 6A/6V and power various servos without connecting any extra receiver battery.
Built-in Electronic Switch & Capacitor Module
Built-in electronic switch (with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design) and capacitor module save space and make the wiring simple and neat.
Programming/Upgrading/Data Reading Wirelessly
With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Separate Programming/Fan Port
The separate PRG/FAN port on the ESC can power an external fan to maximise cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.
Innovative Data-logging Function
This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box to analyse .
Scale - 1/12th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 120A/830A
Input Voltage - 1S Lipo/3-4 Cell NiMH
BEC Output - Switch Mode: 6V@3A
-
XERUN - V10 - 13.5T...
£99.99 £104.99Introducing the Hobbywing XeRun V10 G4.
Built for the ultra competitive Stock racing, the V10 G4 has been tested and developed together with World and European champions.
This new generation has been greatly optimised with the stator being redesigned for higher efficiency and is equipped with ultra high grade custom magnetic ring rotor for maximum torque and increasing the output power by 5%.
The internal resistance has also been reduced by about 4% resulting in a more efficient and cooler temperature of the motor.
The motor adopts a full exposed stator core and is directly exposed to the air for excellent heat dissipation.
The outer diameter is maximised to increase the stator heat dissipation area by 25.6% compared to the V10 G3R motor.
The motor is equipped with a high-precision end bell plate that uses high quality structural components to greatly improve the consistency and structural stability of the power output at all times.
The V10 G4 adopts a modular structural design which is convenient for maintenance which prolongs the service life of the motor.
Specifications
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2
Relevant Parameters
KV Rating - 3950
LiPo Cells - 2-3S
No-load Current(A) - 4.5
Size & Weight
O.D.(mm) - 35.8
Length (mm) - 51.4
Shaft Diameter (mm) - 3.175
Weight (g) - 149
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4
Timing
30-60 Degrees(Adjustable)
Applications - 1/10th STOCK Class Racing -
-
-
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
-
Montech GT12 Body - MLGT3
£21.99Montech Racing has introduced the new MLGT3 body shell for 1/12th scale GT12 pan cars. The body is made of high-quality polycarbonate and due to a new moulding process it is very lightweight yet durable. The kit includes wing, window masks and rear wing mounting hardware and it is usable with almost every GT12 chassis.
BRCA Legal
Supplied Clear
-
-
MONTECH AKURA GT12...
£22.99Designed, like all the latest Mon-Tech products, with 3D modelling software, it was then checked with fluid dynamics software and made with CNC machines.
The company’s new industrial way to work allows them to develop highly detailed bodies, to control the airflow and aerodynamic performance, and to respect class rules. The body is produced from a durable 0.75 mm Lexan and is available in a standard and La Leggera lightweight version.
The kit includes headlight stickers, window masks and hardware to install the rear wing in two different positions to change the rear downforce.
Supplied clear.
BRCA Legal. -
Montech M-4 TC Body 190mm
£31.99From Mon-tech Racing the M-4 body shell for the 1:10 Electric Touring Car category.
Inspired by the sleek and aggressive lines of next-generation cars, the M-4 is based on the iconic German automotive brand.
Standard Weight.
-
-
MX-02183 EFRA PIPE KIT...
£169.99The latest and greatest pipe and manifold kit from 'the master'.
Designed specifically for the MAXPOWER .21 motors but......
Tests have proved them to work supremely well on HASI/OS based & NOVA motors.
HARD COATED. -
-
-
-
-
-
MX 21 351R Tuned...
£649.00THE 2025 WORLD CHAMPIONSHIP WINNING MOTOR IN
TAKAHATA SHOKI'S MUGEN MRX7.
ALSO USED BY DARIO BALESTRI TO WIN THE 2025 EUROS
- MX-21 351R 9 Port 14.5mm Crankshaft.
- Ceramic Bearing Rear
- QUADRIFOGLIO head.
- AAC Piston & Liner
- DLC Coated Crankshaft.
In stock Now.
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
POWERS HD S15 SERVO
£129.99 £139.99S15 Specs：
Torque(6.0V): 11.5 kg-cm (159.7 oz/in)Torque(7.4V): 15.0 kg-cm (208.3 oz/in)Torque(8.4V): 16.5 kg-cm (229.1 oz/in)Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V) │ 0.050 sec (8.4V)Operating Voltage：6.0 ~ 8.4 DC VoltsWeight: 57.5 g (2.03 oz)Bearing Type：Ball Bearing x 2Motor Type：Brushless MotorGear Type：Titanium & SteelOperating Temperature: -20℃~60℃Working frequency：1520μs / 333hzSize：41.0 x 20.0 x 26.0 mm ( 1.61 x 0.79 x 1.02 in) -
POWERS HD S15-M SERVO...
£129.99 £149.99S15-M Specs：
Torque(6.0V): 11.5 kg-cm (159.7 oz/in)Torque(7.4V): 15.0 kg-cm (208.3 oz/in)Torque(8.4V): 16.5 kg-cm (229.1 oz/in)Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V) │ 0.050 sec (8.4V)Operating Voltage：6.0 ~ 8.4 DC VoltsWeight: 57.5 g (2.03 oz)Bearing Type：Ball Bearing x 2Motor Type：Brushless MotorGear Type：Titanium & SteelOperating Temperature: -20℃~60℃Working frequency：1520μs / 333hzSize：41.0 x 20.0 x 26.0 mm ( 1.61 x 0.79 x 1.02 in)
