New Products
New Products
Home
Active filters
-
ULTI 1/12 Front Tyre J...
£20.00 £23.50ULTI 1/12 Front tyre J - Medium
1 x Pack of 3 pairs
PRICE ON EXISTING STOCK ONLY
-
ULTI 1/12 REAR TYRE J...
£20.00 £23.50ULTI 1/12 FRONT tyre J - SOFT
1 x Pack of 3 pairs
PRICE ON EXISTING STOCK ONLY
-
-
AEROX TC DROOP GAUGE &...
£19.99Introducing the new Aerox droop gauge set for 1-10th Touring cars.
A new universal way to take the confusion out of measuring droop across different chassis manufacturers.
Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.
Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.
For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.
Please note: You will have to use 10mm Blocks. Not supplied in this kit. -
AEROX ELITE LIPO...
£70.99With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.
The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road. All supplied in a hard case with 5mm plugs and awesome Aerox styling. The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.
Specifications
Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st. -
AX069 AEROX Soldering...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
-
AEROX SOLDERING...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
This version is the 220-240V version with UK plug.
-
-
-
Hasi Tuned CONICAL...
£35.00Conical manifold that guarantees easy tuning and low fuel consumption. HT01
This is great for middle to fast tracks were there is normally high fuel consumption.
-
HT-017 HASI STEEL REAR...
£52.80Hasi Tuned Swiss Steel Rear Ball Bearing for On-Road Engine (14x25.4x6 mm)
-
-
HT-022 HASI TUNED...
£55.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
-
HASI TUNED PIPE EFRA...
£85.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
HARD COATED VERSION
-
HT-025 HASI 3.5CC...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HASI 3.5CC 0.2MM LINER...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HT-038-CONICAL...
£36.00A conical 90° version (Hard Coated) which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-038-CONICAL MANIFOLD
£32.00A conical 90° version which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-072 HASI SLEEVE...
£48.00The must-have tool on every tuner’s bench.
- More control.
- More precision.
-
HASI Tuned Rear Back...
£32.99After many tests, Hasi engines is proud to present its newest development.
The new backplate reduces friction, improves the flushing inside the crankcase and with that improves the torque in the bottom to mid rpm range. -
-
-
-
Hasi Tuned Special...
£18.99Hasi Tuned aluminium servo horn designed specifically for On-road (and some Off-road) cars.
By making the shape of the arm offset it is possible to achieve the maximum steering angle with a linear steering operation.
Fits Futaba, Savox Power 25t etc etc
-
HASI TUNED 'LOW...
£65.20New Low Profile Head by HASI TUNED, this head in addition to lowering the centre of gravity, due to a saving of 3.8 grams compared to the original.
These heads has been specially produced for engines with AAC liner, as it guarantees a faster and easier warm-up of the engine.
-
-
HASI TUNED MAIN JET...
£25.99Enlarged fuel window.
Enjoy a wider and more precise tuning range, making carburation faster, easier, and more stable under all conditions.
More control.
Less guesswork.
High-grade stainless steel construction Precision-machined for optimal fuel atomisation inside the carburetor, ensuring better efficiency and improved throttle response at high RPM.Full compatibility Direct fit for all OS 21M2 series carburettors.
📦 Now available as an optional upgrade for all OS-based engines.
THESE WORK!!! -
-
-
HT-078-9 HASI TUNED...
£11.89Hasi Tuned High Performance Venturi 9.00 mm Ultra Short Version
Fits all OS based carburettors.
Similar design to MAX engine short venturi. Immediate power increase. -
-
-
-
-
-
Hasi Tuned 7 PORT 2024/25
£439.99 £619.99SALE SPECIAL - 1 ONLY
- - New high dissipation and low density aluminium cooling head, to combine functionality and lightweight.
- - New crankshaft, with revised timing and balancing.
- - New piston and liner, 7 PORTS with high compression piston made from rod.
- - New reinforced 'GENUINE OS' conrod.
- - New type Low Profile head - RED.
Each engine will have its own dedicated sleeve, which will be perfectly honed inside the crankcase, avoiding dangerous vibrations; the design of the ports has been revised to combine performance and reliability.
COMES COMPLETE WITH 'PRE-RUN' (Proper running not oil bath!) + Hasi Special Back Plate
Like every Hasi engine, they are numbered one by one and accompanied by a certificate of guarantee and authenticity and the useful engine book.
-
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
SUNPADOW LIPO...
£64.99Sunpadow's high-end Platin series has released four new high-voltage（HV） Lipo batteries.
The new HV products will further improve the competition-grade application coverage of Platin series products.
The super-conductive material used in its formula can greatly reduce the common swelling phenomenon of car model batteries while improving the discharge performance.Awaiting BRCA - EFRA - IFMAR - ROAR approval.
SPECIFICATIONS 6100 mAh 2S 7.6v 4mm Plugs 140C Burst L139mm x W47mm x D19mm Weight 237g 46.32Wh
-
-
ULTI Invincible 1/8th...
£18.99ULTI 'INVINCIBLE' 1/8th Tyres (2 x 32 equivalent to 35 equivalent Rear)
-
XPERT-RC WR-7701...
£89.99XP-WR-7701-HV XPERT-RC WR-7701 Brushless Waterproof Servo 27.3kg 0.15 60deg at 7.4v. 6.0-8.4v
Xpert now bring to market the "WR" Water Resistant Spec servos. These are based on the architecture of the ever popular SN Series but with added water resistance and still maintaining the aluminium center case and gear support.
Xpert Servos are a range of high spec servos, ALL of which are brushless for reduced current draw, increased efficiency and reduced running temperatures.
Xpert RC have been developing this range for some time now and have been carrying out extended durability testing and performance testing is some of the toughest fields in the market including 1/8thBuggy and Truggy as well as some very large high demand flight units.
Xpert have taken a quality first approach with the entire range and focus on high performance.
The quality of these servos has stunned us, featuring very precise PCB production and use of only the highest quality components. The quality is apparent as soon as the servo is first seen but becomes even more apparent when used exhibiting extreme accuracy and position holding.
WR Range.
