New Products
New Products
Home
Active filters
-
BLITZ YRS 'FWD' 190MM...
£21.99BLITZ YRS 190MM FOR FRONT WHEEL DRIVE.
0.7MM STANDARD
0.5MM L/WEIGHT
-
1/10 & 1/8 BODY HOLE...
£5.99HIGHLY RECOMMENDED.
IDEAL FOR STRENGTHENING BODY POST HOLES. EXRA STRONG ADHESIVE
Available for 1/10th (SMALL 6.5mm) and 1/8th (LARGE 8mm) Lexan bodies. -
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
-
SMD SRX SANWA...
£34.99SMD are proud to introduce their new Sanwa compatible SRX receiver.
Their new receiver is compatible with Sanwa M17, M12, M11x, MT-4, MT-4S, MT-S, MT-44, Exzes X, Exzes Z. Exzes ZZ, Gemini X.
The SMD SRX is a 4-channel receiver.
Measurements - 35.5mm × 23.3mm ×12.7 mm
Input voltage - 3.5V to 8.4V
Weight - 7.3 grams
Channels - 4
Modulation - FHSS-3/FHSS-4 -
SMD SRX 3 FH4 Sanwa...
£45.00This SMD SRX 3 receiver is Sanwa compatible with FHSS-4 and FHSS-3.
Features:
1. Sanwa compatible
2.4GHz FH3/FH4 Selectable Via Transmitter binding process 2. High performance CPU enhances precision control feeling
3. 4 channel support.
4. Micro size (Antenna-Free: 18.2x20.2x27.4mm).
5. Operating Voltage 3.5V - 8.4V:
6. Weight: 5g
7. Battery Voltage Fail-Safe Limit: 3.5-5.0V (FH3) / 3.5-7.4V (FH4) -
SMD SRX 3 FH5 Sanwa...
£45.00SND SRX3 Sanwa FH5 Compatible 4CH Antenna-free receiver.
Description:
The SMD SRX3 Sanwa2.4GHz 4-Channel FHSS5 compatible SSL Telemetry receiver uses a built-in antenna with exceptional range and response time.
With a lightweight design and a small footprint, this receiver is great for 1/10 and 1/12 scale electric RC cars.
This receiver is SSL compatible with either the Super Vortex or PGS Servos (Sold Separately).
Package includes one receiver and one bind plug. -
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
-
XPERT-RC WR-7701...
£89.99XP-WR-7701-HV XPERT-RC WR-7701 Brushless Waterproof Servo 27.3kg 0.15 60deg at 7.4v. 6.0-8.4v
Xpert now bring to market the "WR" Water Resistant Spec servos. These are based on the architecture of the ever popular SN Series but with added water resistance and still maintaining the aluminium center case and gear support.
Xpert Servos are a range of high spec servos, ALL of which are brushless for reduced current draw, increased efficiency and reduced running temperatures.
Xpert RC have been developing this range for some time now and have been carrying out extended durability testing and performance testing is some of the toughest fields in the market including 1/8thBuggy and Truggy as well as some very large high demand flight units.
Xpert have taken a quality first approach with the entire range and focus on high performance.
The quality of these servos has stunned us, featuring very precise PCB production and use of only the highest quality components. The quality is apparent as soon as the servo is first seen but becomes even more apparent when used exhibiting extreme accuracy and position holding.
WR Range.
