New Products
New Products
Home
-
Hasi Tuned CONICAL...
£35.00Conical manifold that guarantees easy tuning and low fuel consumption. HT01
This is great for middle to fast tracks were there is normally high fuel consumption.
-
HT-017 HASI STEEL REAR...
£52.80Hasi Tuned Swiss Steel Rear Ball Bearing for On-Road Engine (14x25.4x6 mm)
-
-
HT-022 HASI TUNED...
£55.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
-
HASI TUNED PIPE EFRA...
£85.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
HARD COATED VERSION
-
HT-025 HASI 3.5CC...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HASI 3.5CC 0.2MM LINER...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HT-038-CONICAL...
£36.00A conical 90° version (Hard Coated) which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-038-CONICAL MANIFOLD
£32.00A conical 90° version which offers more torque in the low and middle rpm and is a perfect choice for fast tracks.
This Manifold are less conical than HT02, for this reason the engine becomes smoother at low to medium rpm. It's good choice for track with medium grip. -
HT-072 HASI SLEEVE...
£48.00The must-have tool on every tuner’s bench.
- More control.
- More precision.
-
HASI Tuned Rear Back...
£32.99After many tests, Hasi engines is proud to present its newest development.
The new backplate reduces friction, improves the flushing inside the crankcase and with that improves the torque in the bottom to mid rpm range. -
-
-
-
Hasi Tuned Special...
£18.99Hasi Tuned aluminium servo horn designed specifically for On-road (and some Off-road) cars.
By making the shape of the arm offset it is possible to achieve the maximum steering angle with a linear steering operation.
Fits Futaba, Savox Power 25t etc etc
-
HASI TUNED 'LOW...
£65.20New Low Profile Head by HASI TUNED, this head in addition to lowering the centre of gravity, due to a saving of 3.8 grams compared to the original.
These heads has been specially produced for engines with AAC liner, as it guarantees a faster and easier warm-up of the engine.
-
-
HASI TUNED MAIN JET...
£25.99Enlarged fuel window.
Enjoy a wider and more precise tuning range, making carburation faster, easier, and more stable under all conditions.
More control.
Less guesswork.
High-grade stainless steel construction Precision-machined for optimal fuel atomisation inside the carburetor, ensuring better efficiency and improved throttle response at high RPM.Full compatibility Direct fit for all OS 21M2 series carburettors.
📦 Now available as an optional upgrade for all OS-based engines.
THESE WORK!!! -
-
-
HT-078-9 HASI TUNED...
£11.89Hasi Tuned High Performance Venturi 9.00 mm Ultra Short Version
Fits all OS based carburettors.
Similar design to MAX engine short venturi. Immediate power increase. -
-
-
-
-
-
Hasi Tuned 7 PORT 2024/25
£439.99 £619.99SALE SPECIAL - 1 ONLY
- - New high dissipation and low density aluminium cooling head, to combine functionality and lightweight.
- - New crankshaft, with revised timing and balancing.
- - New piston and liner, 7 PORTS with high compression piston made from rod.
- - New reinforced 'GENUINE OS' conrod.
- - New type Low Profile head - RED.
Each engine will have its own dedicated sleeve, which will be perfectly honed inside the crankcase, avoiding dangerous vibrations; the design of the ports has been revised to combine performance and reliability.
COMES COMPLETE WITH 'PRE-RUN' (Proper running not oil bath!) + Hasi Special Back Plate
Like every Hasi engine, they are numbered one by one and accompanied by a certificate of guarantee and authenticity and the useful engine book.
-
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
MUGEN/YMC T SHIRT
£15.00MUGEN - YMC RACING UK 'T' SHIRTS.
High Quality T shirts made by GILDAN in 'Royal Blue'
Other colours special order. Contact us for details.
Available in Small, Medium, Large, and Extra Large. Other sizes to order.
Please note that colour may vary slightly on finished product. -
XPERT-RC WR-7701...
£89.99XP-WR-7701-HV XPERT-RC WR-7701 Brushless Waterproof Servo 27.3kg 0.15 60deg at 7.4v. 6.0-8.4v
Xpert now bring to market the "WR" Water Resistant Spec servos. These are based on the architecture of the ever popular SN Series but with added water resistance and still maintaining the aluminium center case and gear support.
Xpert Servos are a range of high spec servos, ALL of which are brushless for reduced current draw, increased efficiency and reduced running temperatures.
Xpert RC have been developing this range for some time now and have been carrying out extended durability testing and performance testing is some of the toughest fields in the market including 1/8thBuggy and Truggy as well as some very large high demand flight units.
Xpert have taken a quality first approach with the entire range and focus on high performance.
The quality of these servos has stunned us, featuring very precise PCB production and use of only the highest quality components. The quality is apparent as soon as the servo is first seen but becomes even more apparent when used exhibiting extreme accuracy and position holding.
WR Range.
