New Products
New Products
Home
Active filters
-
LENS GHIBLI 2.0 1/10...
£20.99 £26.99IN STOCK NOW
PASSED BRCA HOMOLOGATION 28/05/2024
Thanks to the experience of the best drivers in the category and after several hours of development and track tests, the Ghibli 2.0 is born!
The NEW GHIBLI 2.0 delivers better cornering due to the more tapered shape of the front wheel arches, and better grip thanks to the stiffening of the rear axle. The body shell contributes to an improvement in lap times, making driving more relaxing leaving you more concentration to improve your speed!
Available in STANDARD or LIGHTWEIGHT body weights.
-
-
-
-
-
ARROWMAX Tools Base V2...
£55.99ARROWMAX Tools Base V2 BLACK & GOLD.
You'll never know how you did without one!!!! -
-
-
-
MULTI SHOCK CLAMP - V3...
£33.99NEW Arrowmax Shock Clamp Tool.
NEVER build your shocks without this tool. Now with Nylon Insert Jaws for Shock Shaft Protection.
-
ARROWMAX HONEYCOMB...
£365.99ARROWMAX HONEYCOMB TOOL SET WITH TOOL BAG
Honeycomb Tool Set with Tool Bag - 21pcs
Arrowmax Honeycomb tool set including the following tools;
AM410115 - ALLEN WRENCH 1.5 X 120MM Honeycomb
AM410120 - ALLEN WRENCH 2.0 X 120MM Honeycomb
AM410125 - ALLEN WRENCH 2.5 X 120MM Honeycomb
AM410130 - ALLEN WRENCH 3.0 X 120MM Honeycomb
AM420120 - BALL DRIVER HEX WRENCH 2.0 X 120MM Honeycomb
AM420125 - BALL DRIVER HEX WRENCH 2.5 X 120MM Honeycomb
AM420130 - BALL DRIVER HEX WRENCH 3.0 X 120MM Honeycomb
AM430130 - FLAT HEAD SCREWDRIVER 3.0 X 150MM Honeycomb
AM430158 - FLAT HEAD SCREWDRIVER 5.8 X 100MM Honeycomb
AM440135 - PHILLIPS SCREWDRIVER 3.5 X 120MM Honeycomb
AM440158 - PHILLIPS SCREWDRIVER 5.8 X 120MM Honeycomb
AM450150 - NUT DRIVER 5.0 X 100MM Honeycomb
AM450155 - NUT DRIVER 5.5 X 100MM Honeycomb
AM450170 - NUT DRIVER 7.0 X 100MM Honeycomb
AM490003 - REAMER WITH END CAP FOR LEXAN BODY Honeycomb
AM490021 - ARM REAMER 3.0 X 120MM Honeycomb
AM490023 - ARM REAMER 4.0 X 120MM Honeycomb
AM190008 - TURNBUCKLE WRENCH 3MM V2
AM190009 - TURNBUCKLE WRENCH 4MM V2
AM190010 - TURNBUCKLE WRENCH 5MM V2
AM190025-G - MULTI SHOCK-CLAMP V2 ( Gray )
AM199401 - AM EMBROIDERY TOOL BAGAn Ideal Starter Toolkit
-
-
ARROWMAX 'FAST FUEL GUN'
£31.00Built for ultra-fast refuelling, the fast fuel gun stands out as the trigger orientation that makes refuelling more ergonomic.
The materials used on the grip have been tested extensively over a
period of time with Arrowmax factory drivers to ensure mechanics get the best grip during refuelling. -
-
ARROWMAX B/G WRENCH SET
£80.00ARROWMAX BLACK/GOLDEN ALLEN WRENCH SET
Allen Wrench Set... 1.5mm/2mm/2.5mm/3mm
-
-
-
AM Lipo 6000mAh - 3.7V...
£29.99Arrowmax have introduced a dedicated transmitter battery pack for the Sanwa M17 radio. The 3.7V 6000mAh LiPo replaces the standard battery with a high-capacity pack for longer operation time and thus more confidence even when having long days at the track. The battery measures 86x44.5x10.5mm and it comes pre-wired with a universal JR-style plug.
v2 version, new dimensions for perfect fit.
-
AEROX PRO CHASSIS TAPE
£37.49This AEROX Pro Chassis Tape is designed to stick to the bottom of your chassis for carpet racing.
It has an incredibly low friction coefficient and allows the car to glide across the carpet and provide smoother handling characteristics.
It contains a special surface layer that prevents any pick up of additive or rubber from the track surface, meaning the car will stay consistent throughout the run.100mm width to easily fit standard touring car chassis, but can easily be used on LMP12 chassis.
Extremely long roll to use again and again, a one time purchase. Long enough for approximately 25 Touring Car chassis.
Directions for Use
- Ensure chassis is clean (brake cleaner) and dust free before application.
Carefully place over chassis and cut to size using a sharp blade.
- The tape should not need cleaning after running, the special surface can be damaged with brake cleaner type substance. -
-
-
Montech GT12 Body - MLGT3
£21.99Montech Racing has introduced the new MLGT3 body shell for 1/12th scale GT12 pan cars. The body is made of high-quality polycarbonate and due to a new moulding process it is very lightweight yet durable. The kit includes wing, window masks and rear wing mounting hardware and it is usable with almost every GT12 chassis.
BRCA Legal
Supplied Clear
-
-
MONTECH AKURA GT12...
£22.99Designed, like all the latest Mon-Tech products, with 3D modelling software, it was then checked with fluid dynamics software and made with CNC machines.
The company’s new industrial way to work allows them to develop highly detailed bodies, to control the airflow and aerodynamic performance, and to respect class rules. The body is produced from a durable 0.75 mm Lexan and is available in a standard and La Leggera lightweight version.
The kit includes headlight stickers, window masks and hardware to install the rear wing in two different positions to change the rear downforce.
Supplied clear.
BRCA Legal. -
Montech M-4 TC Body 190mm
£31.99From Mon-tech Racing the M-4 body shell for the 1:10 Electric Touring Car category.
Inspired by the sleek and aggressive lines of next-generation cars, the M-4 is based on the iconic German automotive brand.
Standard Weight.
-
-
