New Products
New Products
Home
-
-
AEROX TC DROOP GAUGE &...
£19.99Introducing the new Aerox droop gauge set for 1-10th Touring cars.
A new universal way to take the confusion out of measuring droop across different chassis manufacturers.
Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.
Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.
For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.
Please note: You will have to use 10mm Blocks. Not supplied in this kit. -
AEROX ELITE LIPO...
£70.99With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.
The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road. All supplied in a hard case with 5mm plugs and awesome Aerox styling. The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.
Specifications
Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st. -
AX069 AEROX Soldering...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
-
AEROX SOLDERING...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
This version is the 220-240V version with UK plug.
-
-
-
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
PRO-103008C Project Rc...
£26.99PRO-RC SMALL INS-BOX Air Filter and Intake Silencer.
Suits all .21/.12 On-Road motors.
-
PRO-834 MRX7 BATTERY...
£18.99ALTERNATIVE BATTERY HOLDER FOR MRX7 TO ALLOW FOR ADDITIONAL WEIGHTS.
IDEAL FOR EASILY TUNING THE CAR'S HANDLING.
SUPPLIED WITHUT WEIGHTS.
-
PRO-834-40 BATTERY...
£51.99PROJECTRC BRASS BATTERY TRAY 40g.
Can also be used with Brass and Tungsten Flat weights (for C/FDue early June.
-
-
-
-
PRO-839 LexaBond Lexan...
£26.99LEXABond Complete Kit has been specifically developed for bonding Lexan, offering a strong, precise and reliable adhesion even in the most extreme applications.
Designed for the world of RC modelling and for professional technical uses, it guarantees a high strength hold while maintaining good flexibility, a fundamental characteristic for absorbing vibrations, impacts and deformations without cracking.
The special LEXABond formula allows for a quick, strong and slightly flexible bond, ideal for RC bodies, reinforcements, details and repairs, ensuring maximum durability even in the most demanding conditions.
-
PRO-840 Titanium Gr. 5...
£24.50Introducing our new engine mount fixing screws, specifically designed to deliver maximum strength and reliability in RC racing applications.
Manufactured from solid Titanium Gr.5 billet, these are not standard off-the-shelf screws, but components purpose-developed for this exact application.
The design features an unthreaded section near the screw head, precisely the area working in contact with the chassis.
This solution increases the contact surface and significantly improves rigidity and clamping stability under extreme stress and vibration.
The special low-profile head does not protrude from the chassis, ensuring perfect screw integrity and preventing damage caused by contact with the asphalt during use. -
PRO-H2247 2-SPEED...
£26.99PROJECTRC gearbox adapter, also compatible with the original gearbox axle. High-strength treated steel for longer life
Combined with the PRO-H2248 code it guarantees a more precise and long-lasting assembly of the parts thanks to an improved interlocking between the parts.
Due early June.
-
PRO-H2248 Aluminium...
£26.40Gearbox axle for Mugen Mrx7 with optimized hexagon profile for better coupling between the parts.
-
Project RC Brake Disk...
£33.99IN STOCK.
From Project RC comes the NEW Brake Disc dedicated to the Mugen MRX-6 and MRX7.
Developed with a completely different material than the original to offer superior performance in all conditions.
-
PRO-H2327 SERVO SAVER...
£39.99Ergal servo saver with interchangeable carbon inserts to adjust the Ackermann angle.
The Ergal construction ensures increased safety and delivers a more precise and responsive steering feel.
-
-
PRO-H2428-OPT REAR...
£49.99This rear carbon body mount, compared to the original one, provides greater stability, especially in high-speed corners.
The upper inserts of the mount keep the rear body fins firmly in place, ensuring consistent and efficient aerodynamics in every driving phase.
-
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
SUNPADOW LIPO...
£64.99Sunpadow's high-end Platin series has released four new high-voltage（HV） Lipo batteries.
The new HV products will further improve the competition-grade application coverage of Platin series products.
The super-conductive material used in its formula can greatly reduce the common swelling phenomenon of car model batteries while improving the discharge performance.Awaiting BRCA - EFRA - IFMAR - ROAR approval.
SPECIFICATIONS 6100 mAh 2S 7.6v 4mm Plugs 140C Burst L139mm x W47mm x D19mm Weight 237g 46.32Wh
