Home
-
-
AEROX TC DROOP GAUGE &...
£19.99Introducing the new Aerox droop gauge set for 1-10th Touring cars.
A new universal way to take the confusion out of measuring droop across different chassis manufacturers.
Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.
Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.
For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.
Please note: You will have to use 10mm Blocks. Not supplied in this kit. -
AEROX ELITE LIPO...
£70.99With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.
The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road. All supplied in a hard case with 5mm plugs and awesome Aerox styling. The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.
Specifications
Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st. -
AX069 AEROX Soldering...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
-
AEROX SOLDERING...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
This version is the 220-240V version with UK plug.
-
-
-
CORE RC -Servo 5Kg .08...
£37.99CORE RC -Servo 5Kg .08 Sec 1/12th/GT12
New from CORE RC is this super fast, extremely lightweight digital servo, suitable for 1/12th scale and GT12 cars.
Main Features;
- Coreless motor
- Metal Geared
- Twin Ball Bearing
- Digital Performance
- Heatsink for cooling
- Huge range of Accessories
- Attractively Packaged
Specification;
Weight - 33g
Speed - 0.08sec/60deg (6v)
Torque - 5.0kg/cm (6v)
Size - 35.5mm x 15.3mm x 42.2mm
25T splineThe CORE RC 5008 servo comes with a huge range of accessories.
-
-
PISTON DRILLING...
£9.99Fine tuning of shock piston sizes has always been a tuning tool for the pro's.
Now with this new tool from Core RC its a simple task for any racer.
This hand drill comes included with 8 different drill bits 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm and 1.8mm. The double ended chuck also allows for drill sizes between 0 to 2.9mm, for other simple hand drilling use. -
BODY REPAIR TAPE
£2.99CR258 - BODY REPAIR TAPE - 50MM X 1MTR
Repair your lexan body after a heavy crash with this super tough aluminium fibre tape. Its fibre glass reinforcement prevents damage making your bodies last longer.
-
-
-
-
-
PINION GEAR 48DP 25T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 27T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 28T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 29T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 30T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 31T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 32T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 33T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 35T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 36T...
£4.99Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
Super Flex 26GS...
£4.00Core RC Super Flexible High Quality silicone Sensor wire.
Please choose length required from drop-down menu..
-
CORE RC LOW Pro...
£9.99Awesome plug covers that help with the removal of your battery plugs.
Plus, assist you in plugging in the correct polarity. 5mm diameter. Super bling look!
These Low profile versions are held in place with a spot of cyanoacrylate glue, not supplied.
-
-
CORE PAINTS for LEXAN
£5.75Core RC Colour is a new range of polycarbonate (lexan) paint for RC Bodies.
The paint is available in a huge range of colours to suit all RC enthusiasts tastes!
It is capable of withstanding the rough and tumble of RC use being very flexible
and also fuel resistant so perfect for Nitro cars too.Each can contains 150ml of high quality paint.
Neon colours look brighter backed with white, metallic colours can be backed with
silver or black to get different shades of colour.PLEASE CHOOSE COLOUR FROM 'DROP-DOWN' BOX
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
SUNPADOW LIPO...
£64.99Sunpadow's high-end Platin series has released four new high-voltage(HV) Lipo batteries.
The new HV products will further improve the competition-grade application coverage of Platin series products.
The super-conductive material used in its formula can greatly reduce the common swelling phenomenon of car model batteries while improving the discharge performance.Awaiting BRCA - EFRA - IFMAR - ROAR approval.
SPECIFICATIONS 6100 mAh 2S 7.6v 4mm Plugs 140C Burst L139mm x W47mm x D19mm Weight 237g 46.32Wh
-
PERMA GRIT Flat Files...
£11.29Flat hand file. Tungsten Carbide.
Dims. 230 x 38mm thickness 1.6mm.
Useful to get into narrow places where the sanding block is unable to fit.
Use to clean up slots, cut outs in former's and general sanding. Use to de-burr aluminium, and other jagged edges.IDEAL FOR FOAM TYRE TRUING/FINISHING.
Coarse...... 1/8th Nitro and 1/10th Foams
Fine............1/10th and 1/12th Scale FoamsPerma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminium, Ceramics, Stone, Horn, Antler etc.
-
-