New Products
New Products
Home
-
-
HT-017 HASI STEEL REAR...
£52.80Hasi Tuned Swiss Steel Rear Ball Bearing for On-Road Engine (14x25.4x6 mm)
-
HT-022 HASI TUNED...
£55.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
-
HASI TUNED PIPE EFRA...
£85.99Developed after more than a year of testing with our team drivers, this exhaust guarantees better engine operation throughout its range of use, combining a sound without compromises.
HARD COATED VERSION
-
HT-025 HASI 3.5CC...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HASI 3.5CC 0.2MM LINER...
£11.99PACK OF 3
IMPORTANT NOTE:
After fitting one, or more, of these shims machining work will be needed on the engine squish head.Failure to do this will result in poor performance.
-
HT-072 HASI SLEEVE...
£48.00The must-have tool on every tuner’s bench.
- More control.
- More precision.
-
-
-
-
HASI TUNED 'LOW...
£65.20New Low Profile Head by HASI TUNED, this head in addition to lowering the centre of gravity, due to a saving of 3.8 grams compared to the original.
These heads has been specially produced for engines with AAC liner, as it guarantees a faster and easier warm-up of the engine.
-
-
HASI TUNED MAIN JET...
£25.99Enlarged fuel window.
Enjoy a wider and more precise tuning range, making carburation faster, easier, and more stable under all conditions.
More control.
Less guesswork.
High-grade stainless steel construction Precision-machined for optimal fuel atomisation inside the carburetor, ensuring better efficiency and improved throttle response at high RPM.Full compatibility Direct fit for all OS 21M2 series carburettors.
📦 Now available as an optional upgrade for all OS-based engines.
THESE WORK!!! -
-
-
HT-078-9 HASI TUNED...
£11.89Hasi Tuned High Performance Venturi 9.00 mm Ultra Short Version
Fits all OS based carburettors.
Similar design to MAX engine short venturi. Immediate power increase. -
-
-
-
Hasi Tuned 7 PORT 2024/25
£439.99 £619.99SALE SPECIAL - 1 ONLY
- - New high dissipation and low density aluminium cooling head, to combine functionality and lightweight.
- - New crankshaft, with revised timing and balancing.
- - New piston and liner, 7 PORTS with high compression piston made from rod.
- - New reinforced 'GENUINE OS' conrod.
- - New type Low Profile head - RED.
Each engine will have its own dedicated sleeve, which will be perfectly honed inside the crankcase, avoiding dangerous vibrations; the design of the ports has been revised to combine performance and reliability.
COMES COMPLETE WITH 'PRE-RUN' (Proper running not oil bath!) + Hasi Special Back Plate
Like every Hasi engine, they are numbered one by one and accompanied by a certificate of guarantee and authenticity and the useful engine book.
-
-
-
GT12 REAR T FOAM 35SH...
£7.99GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.
-
JR-36RYBRCA26 CONTACT...
£24.99New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.
Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.
Built with a new revlite wheel to allow improved gluing and modern dimensions.
The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.
2026 identifying sticker on each wheel.
-
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
