New Products
New Products
Home
Active filters
-
CENTRO MINI ELECTRIC...
£59.99A must have for any pit box is the mini electric intelligent soldering iron from Centro! It is perfect for all your soldering requirements and ready to use in just over 10 seconds. It features an OLED display for the adjustable temperature range depending on the job in hand.
Simple connectivity to 12-24V DC power and a selection of optional power leads provides users with a host of ways to power up the iron. A selection of optional tips are available for you to fine tune your soldering depending on the job, making the mini pit iron as versatile as they come.Centro Mini Electronic Intelligent Soldering Iron Features:
-
Ready to use in 10-15 seconds
-
OLED Display
-
Adjustable Temperature Range
-
12-24V DC Input Voltage
-
Optional Tips Available
-
Compact and portable
-
Includes Sloped tip, power cable & stand
Spec Check:
-
65W power output @24v
-
Temperature stability - ±2%
-
Temperature Range - 100°C - 400°C (max)
Safety instructions:
-
Ensure that you use the correct power supply and accessories
-
Do not touch the tip of the soldering iron after the temperature has risen to avoid burns
-
Before replacing the soldering iron tip, you must turn off the power and wait for the soldering iron to cool down
-
-
-
CENTRO MINI SOLDERING...
£5.99Makes it easy to carry your soldering iron to every meeting.
Case contents shown are not supplied with case. -
MR33 ALUMINIUM MOON...
£25.99MR33 Moon Style High Speed Aluminium Fan for the perfect motor cooling.
The fan has a rounded top aluminium housing for a very long life and a very cool look.
In addition, the fan has a high speed for the perfect cooling of your motor!
Cable length (to plug): 165mm
The MR33 Moon Style fans are available in 30mm and 40mm versions.
MR33-AMCF-30 MR33 Aluminum Moon Style High Speed Fan 30mm
MR33-AMCF-40 MR33 Aluminum Moon Style High Speed Fan 40mm -
-
-
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
-
MAXIMA R6 .21 ON-ROAD...
£455.99 £599.99ONE LEFT WITH MAXIMA MODIFIED BACK-PLATE
Maxima MX Europa have introduced their new .21 engine for 1/8 On-Road class, the Maxima Mx R6.
Over the past years several tests have been done with Mx R2 and Mx R4 to get to the R6,
with all the quality standard of our engines and overall performance regarding torque and runtime.The Mx R6 is based on O.S Speed R2103 with special factory modifications to Crankshaft, Liner and
Piston and comes 'Pre-Run' to shorten the running in process by half!
Main Features:
Lower Centre of gravity for better handling
• A second inner button head allows for finer tuning to meet track conditions
• New ceramic rear bearing reduces friction loss
• Compatible with 16% nitro fuel, which complies with EFRA regulations
• Retains O.S Speed innovations such as DLC coating and tungsten weighted crank shaft
Power with Economy!
All motors are factory selected, tuned and modified by Maxima.PLEASE NOTE:
ALL MAXIMA MOTORS ARE SUPPLIED PRE-RUN USING OIL BATH METHOD (Not fully run-in) -
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
PRO-103008C Project Rc...
£26.99PRO-RC SMALL INS-BOX Air Filter and Intake Silencer.
Suits all .21/.12 On-Road motors.
-
PRO-834 MRX7 BATTERY...
£18.99ALTERNATIVE BATTERY HOLDER FOR MRX7 TO ALLOW FOR ADDITIONAL WEIGHTS.
IDEAL FOR EASILY TUNING THE CAR'S HANDLING.
SUPPLIED WITHUT WEIGHTS.
-
PRO-834-40 BATTERY...
£51.99PROJECTRC BRASS BATTERY TRAY 40g.
Can also be used with Brass and Tungsten Flat weights (for C/FDue early June.
-
-
-
-
PRO-840 Titanium Gr. 5...
£24.50Introducing our new engine mount fixing screws, specifically designed to deliver maximum strength and reliability in RC racing applications.
Manufactured from solid Titanium Gr.5 billet, these are not standard off-the-shelf screws, but components purpose-developed for this exact application.
The design features an unthreaded section near the screw head, precisely the area working in contact with the chassis.
This solution increases the contact surface and significantly improves rigidity and clamping stability under extreme stress and vibration.
The special low-profile head does not protrude from the chassis, ensuring perfect screw integrity and preventing damage caused by contact with the asphalt during use. -
PRO-H2247 2-SPEED...
£26.99PROJECTRC gearbox adapter, also compatible with the original gearbox axle. High-strength treated steel for longer life
Combined with the PRO-H2248 code it guarantees a more precise and long-lasting assembly of the parts thanks to an improved interlocking between the parts.
Due early June.
-
PRO-H2248 Aluminium...
£26.40Gearbox axle for Mugen Mrx7 with optimized hexagon profile for better coupling between the parts.
-
Project RC Brake Disk...
£33.99IN STOCK.
From Project RC comes the NEW Brake Disc dedicated to the Mugen MRX-6 and MRX7.
Developed with a completely different material than the original to offer superior performance in all conditions.
-
PRO-H2327 SERVO SAVER...
£39.99Ergal servo saver with interchangeable carbon inserts to adjust the Ackermann angle.
The Ergal construction ensures increased safety and delivers a more precise and responsive steering feel.
-
-
PRO-H2428-OPT REAR...
£49.99This rear carbon body mount, compared to the original one, provides greater stability, especially in high-speed corners.
The upper inserts of the mount keep the rear body fins firmly in place, ensuring consistent and efficient aerodynamics in every driving phase.
-
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
