New Products
New Products
Home
Active filters
-
-
-
HOBBYWING XERUN XR10...
£32.00 £44.99Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.
ONE ONLY AT THIS PRICE.
Specification:
Cont./Peak Current - 60A/380A
Motor Limit - Sensored / Sensorless Brushless Motor
Applications - 1/10, 1/12 on-road & off-road CLUB competition and normal training
(Motor) KV Limit - Brushless Motor Limit 2S LiPo/4-6S NiMH: 8.5T (1/10 on-road), 11.5T (1/10 off-road)
Brushless Motor Limit 3S LiPo/8-9S NiMH:13.5T (1/10 on-road), 17.5T (1/10 off-road) .LiPo/NiMH Cells - 2-3S LiPo/4-9S NiMH
BEC Output - 6V, 2A (Line-mode BEC)
Fan (Included) - Powered by the stable BEC output voltage of 6V
Connectors - Input End: No, Output End: No.
Size/Weight (mm/g) - 33.5mm(L) x 28.5mm(W) x 30.5mm(H) / 59.8g
-
XERUN XR10 JUSTOCK G3
£61.99Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.
Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.
Built-in capacitor module
The built-in capacitor module eliminates the need for external capacitors and unwanted space.
RPM speed limit function
The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.
Zero timing competition design
The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.
Built-in BEC supporting high-voltage steering gear
The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
User-friendly and convenient for set-up
The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.
Protection functions
The various protection functions have greatly improved the reliability and durability of the ESC.
Single programming and RESET design button
The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.
Support bi-directional motor movement
The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.
Support ESC firmware upgrade
Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A
Wires & Connectors
Input Wires - Black-14AWG-200mm*2
Output Wires - Black-14AWG-200mm*3
Input Connectors - No
Output Connectors - No
Fan
Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC
ESC Programing via
SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate
Firmware
Firmware Upgrade - Supported
Size & Weight
Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)
Applications
Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10thTouring Cars & Buggies for Racing
KV Rating/T Count - ≥10.5T 3650 Motor -
-
-
XERUN XR10 Pro Black G3
£184.00 £209.99We are moving premises at the end of May this year and we are doing 'stock rotation' at the moment.
Keep an eye out for more special offers...on existing stock only
Introducing from Hobbywing the XR10 G3 Competition Speed Control.
HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.
HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.
-
XERUN XR10 Pro GREY G3
£184.00 £209.99We are moving premises at the end of May this year and we are doing 'stock rotation' at the moment.
Keep an eye out for more special offers...on existing stock only
.HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.Introducing from Hobbywing the XR10 G3 Competition Speed Control.
HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.
-
HOBBYWING XERUN XR10...
£117.00 £129.99Special Design for 1/12th Scale Top Racing
Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to 1/12th scale top touring car racing.
High reliable heat dissipation system
Internal power board covered with copper heat conducting confluence strip which is HobbyWing’s patent technology. The strip is convenient for transferring the internal heat rapidly to an integrated shell radiator, together with a high-speed heat dissipation fan, which build a high reliability heat dissipation system, to ensure the ESC is always in the best state of heat dissipation.
Super BECInternal BEC features booster circuitry can output the current/voltage of up to 6A/6V and power various servos without connecting any extra receiver battery.
Built-in Electronic Switch & Capacitor Module
Built-in electronic switch (with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design) and capacitor module save space and make the wiring simple and neat.
Programming/Upgrading/Data Reading Wirelessly
With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Separate Programming/Fan Port
The separate PRG/FAN port on the ESC can power an external fan to maximise cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.
Innovative Data-logging Function
This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box to analyse .
Scale - 1/12th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 120A/830A
Input Voltage - 1S Lipo/3-4 Cell NiMH
BEC Output - Switch Mode: 6V@3A
-
XERUN - V10 - 13.5T...
£99.99 £104.99Introducing the Hobbywing XeRun V10 G4.
Built for the ultra competitive Stock racing, the V10 G4 has been tested and developed together with World and European champions.
This new generation has been greatly optimised with the stator being redesigned for higher efficiency and is equipped with ultra high grade custom magnetic ring rotor for maximum torque and increasing the output power by 5%.
The internal resistance has also been reduced by about 4% resulting in a more efficient and cooler temperature of the motor.
The motor adopts a full exposed stator core and is directly exposed to the air for excellent heat dissipation.
The outer diameter is maximised to increase the stator heat dissipation area by 25.6% compared to the V10 G3R motor.
The motor is equipped with a high-precision end bell plate that uses high quality structural components to greatly improve the consistency and structural stability of the power output at all times.
The V10 G4 adopts a modular structural design which is convenient for maintenance which prolongs the service life of the motor.
Specifications
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2
Relevant Parameters
KV Rating - 3950
LiPo Cells - 2-3S
No-load Current(A) - 4.5
Size & Weight
O.D.(mm) - 35.8
Length (mm) - 51.4
Shaft Diameter (mm) - 3.175
Weight (g) - 149
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4
Timing
30-60 Degrees(Adjustable)
Applications - 1/10th STOCK Class Racing -
-
-
-
-
NEON MTC - S2 - Kit
£198.00 £219.99MID OCTOBER DELIVERY
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car.
The NEON is already a proven winner at British BRCA National races.
It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast.
The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class. -
NEON MTC - CARBON...
£288.00 £319.99MID OCTOBER DELIVERY
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car.
The NEON is already a proven winner at British BRCA National races.
It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast.
The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class. -
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
PG MUFFLER GLOVE SPRAY
£18.99P-Line Muffler Glove is a special protective grease resistant to high temperatures (-35°C +270°C).
Apply by spraying Muffler Glove generously directly onto the exhaust, simulating a paint job.
For best results, we recommend applying two coats of release agent).After use, any rubber residue that adheres can be easily removed with a simple cloth and without any effort.
One application lasts for more than 12 hours.
NO MORE HOURS SPENT CLEANING THE BURNT ON CRAP ON YOUR EXHAUSTS!A **MUST HAVE** for every nitro racers toolbox
Large 400ml spray can for ease of use. -
PG FAST CLEANER
£5.99The new benchmark in professional cleaning for RC micromotors arrives.
🎯P-Line Fast Cleaner – Code: PG16206 Designed by Pepe Group to meet the highest standards in the RC industry.
💥High-performance technical cleaner for internal and external use of micromotors:
✅Degreases deeply
✅Zero residues
✅Safe on silicones and plastics – designed not to damage them
✅Specific formula for the RC sector 🧪Tested to satisfy the most demanding professionals and pilots.
🚀600 ml format with constant high pressure delivery: maximum effectiveness from the first to the last spray.⚙️It's not just a degreaser. It's the ultimate technical cleaner for the RC world.
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
-
Rush Mini Tyres 24...
£25.00Rush Mini Tyres 24 Round Pre-Glued 4pcs
Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' materialmore grip and less chance of breaking.
-
-
RUSH PRE-GLUED TYRES...
£21.00 £25.99From Rush for the 2025 outdoor tarmac season.
BRCA 1/10th Nationals control tyre 2025.
New Medium moulded insert.
2025 version identified with a blue sticker on wheel.
Stitched and glued belts for extra durability on long, fast type tracks.
Excellent RUSH gluing.
-
-
-
-
TOP DECK CONVERSION -...
£24.99The new Atom 2 Top Deck Conversion offers increased chassis stiffness. This new option part has the ability to achieve both improved rotation and corner speed. It does this while also offering improved stability and drivability, particularly in high traction conditions. Although different parts, we first brought and developed this concept for the 1/12 Eclipse range of cars, with fantastic results, transferring fantastically into GT12 too!
2 Option bags are available. U8148 catering for the kit Steel-Alloy chassis and U8157 for those using the Atom 2 C/F chassis (U8033).
A prototype was used at the final GT12 national this year to take TQ and the win. -
SHIMIZU D01J WET...
£44.99Chosen as the control tyre for the BRCA nationals since 2012.
A fantastic wet weather tyre, built with the D01J wet tyre, Schumacher Revlite wheel and yellow moulded insert.
The V3 version of the popular rain tyre is now manufactured by Schumacher as shipped from us from 04/12/2020.Increase in direct material cost beyond our control has unfortunately meant the price has had to rise. Performance should be similar or better than the V2 version. V3.1 Version has improved belting joint strength; on track performance is the same as V3 version.
Please note these tyres are very soft, do not rev a car hard when on a car stand, with no load on the tyres or stranded off track such as on the grass. This tyre is very soft and should only be used for wet or damp tarmac. It should not be used on dry tarmac.
