New Products
New Products
Home
Active filters
-
-
-
-
-
OS 21XZ Wrist-pin OS...
£5.39- VSR01
- VSR02
- VSPTO01
- VSM01
- OS R2101
- OS R2102
- OS R2103
- OS R2104
OS R2105 - OS R21 EURO (I & II)
- OS 21XZ-R
OS 21XZ-GT
Length: .53" (13.5mm)
Diameter: .16" (4mm) -
-
-
OS SPEED R2104...
£172.99NEW OS2104 Liner, Piston and ConRod Assembly.
Displacement: 3.49 cc
Bore: 16.08 mm
Stroke: 17.2 mm -
OS2DA07000 Rear Cover...
£27.99BACK-PLATE FOR ALL OS BASED ENGINES. A 'No Brainer!'
STEEL INSERT (Replaceable) -
-
AEROX TC DROOP GAUGE &...
£19.99Introducing the new Aerox droop gauge set for 1-10th Touring cars.
A new universal way to take the confusion out of measuring droop across different chassis manufacturers.
Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.
Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.
For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.
Please note: You will have to use 10mm Blocks. Not supplied in this kit. -
AEROX ELITE LIPO...
£70.99With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.
The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road. All supplied in a hard case with 5mm plugs and awesome Aerox styling. The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.
Specifications
Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st. -
AX069 AEROX Soldering...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
-
AEROX SOLDERING...
£79.99Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
This version is the 220-240V version with UK plug.
-
-
-
INTELLECT LIPO 1800MAH...
£17.99Intellect RX LiPo Receiver pack.
Ideal for MUGEN MRX and MTC Nitro cars and most others including xray.
1800mAh 2S
13.7*27.5*83mm RX Connector
Only 58g -
Lipo Rx/Tx Flat Pack...
£22.992S Lipo which can be widely used as a receiver (RX) pack and also a transmitter (TX) battery for a wide variety of transmitters including the KO Esprit 4, SANWA Exzes ZZ & Z, MT4-S, M12-RS, M12S and more.
Dimensions 16.8*30.3*85.5mm RX Connector
84.5g 18.24Wh
-
-
Intellect Lipo LiHV...
£37.99For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.
Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.
2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.
To address market demands 2 options nominally are available Hi Power and Long RunTime.
BRCA/EFRA Legal as of April 2019
Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied. -
-
NEON MTC - S2 - Kit
£198.00 £219.99MID OCTOBER DELIVERY
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car.
The NEON is already a proven winner at British BRCA National races.
It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast.
The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class. -
NEON MTC - CARBON...
£288.00 £319.99MID OCTOBER DELIVERY
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car.
The NEON is already a proven winner at British BRCA National races.
It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast.
The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class. -
O.S. Glowplug Speed...
£14.00This special Speed version of the OS RP7 glowplug is plated in 24K gold. But the gold is not just for added for cosmetic 'bling' as the gold plating was chosen for its thermal characteristics in order to improve throttle response in medium and low speed ranges over a standard plug.
-
-
O.S. SPEED T1204 1CS00
£399.99Featuring improved torque at medium to low speeds, the throttle response has also been improved.
This has been achieved through a newly designed crankshaft with different counter weight shape which has had two tungsten weights installed for improve performance.
The cooling head has also been changed to improve cooling, while the button and its o-ring has been modified to prevent dust entering this area.
- New inner crankshaft.
- New Cooling-head increased cooling.
- New combustion chamber/o-ring.
New Pipe & Manifold: 1070SC(EFRA2672)/MT03
Type : Touring Contents : .12(2.11cc) Bore : 13.67mm Stroke : 14.30mm Crankshaft : DLC/TUNG/SIL 12mm SG/SPT Main Bearing : 12mm Ceramic Front Bearingt : 7mm HighSpeed Cylinder type : ABC Ports : 3 Exhaust : 1 Carburator : 12F5(B) with 5.5mm venturi Cooling-Head : 48mm/6 ribs Underhead : for glowplugs Conical/Turbo RMP : Max Power @ 33K RPM (5-45K RPM range) Weight : 215Gr -
O.S. SPEED R2105
£469.99New OS Speed R2105 IN STOCK NOW
Features:- NEW FROM THE GROUND UP...
- New design crankcase, Performance is improved by adopting a new mould.
- New crankshaft by changing the counterweights from 4 to 5mm and optimising the weight balance, the feeling in low and mid-range power is improved.
- New 9-ports cylinder adapted to the new crankcase internal design.
- New look cooling-head changed from conventional black colour to polished silver with clear coating.
- New backplate with steel thrust plate.
- New main-needle design with double o-rings for more tuning stability.
- New shaped idle-needle for better torque in the low rpm area.
-
Specifications
Content: 3.49 cc
Bore: 16.08mm
Stroke: 17.20mm
HP: 2.8 ps / 2.76 hp at 33000 r.p.m.
Practical range: 4000-45000 r.p.m.
Weight: 340g -
-
O.S. SPEED R21 EURO...
£477.39IN STOCK NOW.
The BRAND NEW EUROSPEC II Motor from OS Engines.
(Price does NOT INCLUDE Pipe & Manifold.)- NEW CRANKSHAFT. Featuring an extra Tungsten counter balance weigh to improve mid range performance and 'return to idle' function.
- NEW LINER & PISTON. 7 ports (similar to Shimo II) for a smoother power delivery with increased torque. Exhaust side extra liner ports to improve piston cooling and a better heat distribution.
- New Head Graphics.
-
OS1FG01 O.S. SPEED R21...
£499.99We proudly present the O.S. SPEED R21 Shimo3 Edition, developed in collaboration with Takaaki Shimo, multiple podium finisher at the IFMAR 1/8 Racing World Championship.
This 9-port engine features a specially treated piston and a newly matched cylinder for enhanced durability and longer lifespan.
The LGC cooling head and 8.5mm carburettor restrictor are anodised in a distinctive colour exclusive to this edition.
Additional upgrades include a new Dust Cover Ring and Exhaust Spacers to fine-tune engine performance to your preference.
This package comes complete with the latest EFRA2196 tuned muffler and its MR05 manifold, making it a truly special edition for performance enthusiasts. -
-
-
-
OS T1201-4 CERAMIC...
£56.65Genuine OS parts.
CERAMIC REAR BEARING
Suits all OS .12 motors from 1201 to 1204 -
-
-
-
OSSPEED OS21 CONROD...
£39.90R2101/2/3/4/5 & MAXIMA R6
With 3 Piston Circlips
- VSR01
- VSR02
- VSPTO01
- VSM01
- OS R2101
- OS R2102
- OS R2103
- OS R21 EURO
- OS 21XZ-R
OS 21XZ-GT
Length: .53" (13.5mm)
Diameter: .16" (4mm) -
-
-
OS R2103...
£149.79Genuine 'OS' R2103 Liner/Piston & Rod set.
Displacement: 3.49 cc
Bore: 16.08 mm
Stroke: 17.2 mm -
EURO SPEC II R21 KIT...
£166.99OS SPEED R21 EURO SPEC II
LINER/PISTON/ROD ASSEMBLYDisplacement: 3.49 cc
Bore: 16.08 mm
Stroke: 17.2 mm -
O.S.SPEED CARBURETTOR...
£11.99O.S.SPEED CARBURETTOR REPAIR KIT 21
SIMILAR TO BASIC O RING SET BUT INCLUDES FITTING GUIDES.
-
-
-
-
OS GLOWPLUG RP7
£12.99O.S. Engines T-Series RP7 Cold Heat Range Turbo Glow Plug.
Recommended for nitro ON-ROAD engines .12 -.21 16 - 25% nitro fuels
-
-
OS GLOWPLUG RP8
£13.99O.S. Engines T-Series RP8 Ultra Cold Heat Range Turbo Glow Plug.
Recommended for nitro ON-ROAD engines .12 -.21 16 - 25% nitro fuels
