CORE 'GEL' TAPE - DOUBLE SIDED TAPE

Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.

ONE ONLY AT THIS PRICE.

Specification:

Cont./Peak Current - 60A/380A

Motor Limit - Sensored / Sensorless Brushless Motor

Applications - 1/10, 1/12 on-road & off-road CLUB competition and normal training

(Motor) KV Limit - Brushless Motor Limit 2S LiPo/4-6S NiMH: 8.5T (1/10 on-road), 11.5T (1/10 off-road)
Brushless Motor Limit 3S LiPo/8-9S NiMH:13.5T (1/10 on-road), 17.5T (1/10 off-road) .

LiPo/NiMH Cells - 2-3S LiPo/4-9S NiMH

BEC Output - 6V, 2A (Line-mode BEC)

Fan (Included) - Powered by the stable BEC output voltage of 6V

Connectors - Input End: No, Output End: No.

Size/Weight (mm/g) - 33.5mm(L) x 28.5mm(W) x 30.5mm(H) / 59.8g

Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.

Built-in polarity protection

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.

Built-in capacitor module

The built-in capacitor module eliminates the need for external capacitors and unwanted space.

RPM speed limit function

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.

Zero timing competition design

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.

Built-in BEC supporting high-voltage steering gear

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

User-friendly and convenient for set-up

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.

Protection functions

The various protection functions have greatly improved the reliability and durability of the ESC.

Single programming and RESET design button

The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.

Support bi-directional motor movement

The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.

Support ESC firmware upgrade

Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No

Specifications

Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A

Wires & Connectors

Input Wires - Black-14AWG-200mm*2
Output Wires - Black-14AWG-200mm*3
Input Connectors - No
Output Connectors - No

Fan

Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC

ESC Programing via

SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate

Firmware

Firmware Upgrade - Supported

Size & Weight

Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)

Applications

Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10thTouring Cars & Buggies for Racing
KV Rating/T Count - ≥10.5T 3650 Motor

The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions.

This speed control is NOT BRCA legal for 2024 Nationals in the control 17.5T or FWD class.

Control products for that class are HW30112003, HW38020321, HW30408011 Fan intelligent start and stop function When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

Freewheeling Feature With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners. Built-in polarity protection One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals.

Multi RPM limit, select as needed Supports 79RPM Limits （10000-88000RPM）RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world. Built-in capacitor module, optimized layout The built-in capacitor module eliminates the need for external capacitors and unwanted space.

Built in BEC The ESC has a built-in BEC which can support a maximum output current of up to 8A. The output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
Built-in data logging function The ESC has a built-in data recording function making it easy to obtain the operating status. The data includes; Minimum voltage Maximum ESC temperature Maximum current Maximum motor temperature

Maximum RPM Wireless connection for data recording and analysis After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions.
Note: Due to the Bluetooth transmission distance, the effective distance is about 5m! Parameters optimized It is tailored and are more in line with competition needs.
Type Scale - 1/10th Brushed/Brushless - BL Sensored/Sensorless - SD Waterproof - No Specifications Cont./Peak Current - 60A/380A Input Voltage - 2S LiPo BEC Output - 6V/7.4V @4A Wires & Connectors Input Wires - Black-14AWG-200mm*1 Red-14AWG-200mm*1 Output Wires - Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1 Input Connectors - No Output Connectors - No Fan Size - 25x25x10mm Output Wires - 5-7.4V Input Connectors - Powered by BEC

We are moving premises at the end of May this year and we are doing  'stock rotation' at the moment.

Keep an eye out for more special offers...on existing stock only

Introducing from Hobbywing the XR10 G3 Competition Speed Control.

HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.

HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.

We are moving premises at the end of May this year and we are doing  'stock rotation' at the moment.

Keep an eye out for more special offers...on existing stock only
.

HW30112620 - XERUN XR10 Pro Grey G3 X - Titanium Grey Case / 12AWG wire / NO Reverse Polarity Protection / More punch feeling and ideal for STOCK classes.Introducing from Hobbywing the XR10 G3 Competition Speed Control.

HW30112619 - XERUN XR10 Pro Black G3 - Black Case / 13AWG Wire / Reverse Polarity Protection / Smoother power delivery and ideal for MODIFIED classes.

Special Design for 1/12th Scale Top Racing

Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to 1/12th scale top touring car racing.

High reliable heat dissipation system

Internal power board covered with copper heat conducting confluence strip which is HobbyWing’s patent technology. The strip is convenient for transferring the internal heat rapidly to an integrated shell radiator, together with a high-speed heat dissipation fan, which build a high reliability heat dissipation system, to ensure the ESC is always in the best state of heat dissipation.
Super BEC

Internal BEC features booster circuitry can output the current/voltage of up to 6A/6V and power various servos without connecting any extra receiver battery.

Built-in Electronic Switch & Capacitor Module

Built-in electronic switch (with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design) and capacitor module save space and make the wiring simple and neat.

Programming/Upgrading/Data Reading Wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Adjustable Throttle & Brake PWM Frequencies

Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).

Separate Programming/Fan Port

The separate PRG/FAN port on the ESC can power an external fan to maximise cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.

Innovative Data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box to analyse .

Scale - 1/12th

Brushed/Brushless - BL

Sensored/Sensorless - SD

Waterproof - No

Specifications

Cont./Peak Current - 120A/830A

Input Voltage - 1S Lipo/3-4 Cell NiMH

BEC Output - Switch Mode: 6V@3A

Introducing the Hobbywing XeRun V10 G4.

Built for the ultra competitive Stock racing, the V10 G4 has been tested and developed together with World and European champions.

This new generation has been greatly optimised with the stator being redesigned for higher efficiency and is equipped with ultra high grade custom magnetic ring rotor for maximum torque and increasing the output power by 5%.

The internal resistance has also been reduced by about 4% resulting in a more efficient and cooler temperature of the motor.

The motor adopts a full exposed stator core and is directly exposed to the air for excellent heat dissipation.

The outer diameter is maximised to increase the stator heat dissipation area by 25.6% compared to the V10 G3R motor.

The motor is equipped with a high-precision end bell plate that uses high quality structural components to greatly improve the consistency and structural stability of the power output at all times.

The V10 G4 adopts a modular structural design which is convenient for maintenance which prolongs the service life of the motor.

Specifications

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 2

Relevant Parameters

KV Rating - 3950
LiPo Cells - 2-3S
No-load Current(A) - 4.5

Size & Weight

O.D.(mm) - 35.8
Length (mm) - 51.4
Shaft Diameter (mm) - 3.175
Weight (g) - 149
Front Bearing - D9*D4*t4
Rear Bearing - D8*D3*t4

Timing

30-60 Degrees(Adjustable)

Applications - 1/10th STOCK Class Racing

*BRCA & EFRA Approved*
The new G4R stator and winding design reduces the overall internal resistance,
while maintaining the requirements for sanctioning spec class rules.
The improved motor efficiency reduces the temperature rise to
keep internal resistance numbers consistent.

The motor adopts an open core can, and uses an all new Rotor.
This allows the heat generated by the stator to be directly cooled by airflow.
The can and rotor design allows airflow through the motor to
maximise the cooling.

HOBBYWING WI-FI EXPRESS MODULE

HOBBYWING WI-FI EXPRESS MODULE

REQUIRED FOR BRCA 17.5 TOURING CAR COMPETITION 2024

REQUIRED FOR BRCA 17.5 TOURING CAR COMPETITION 2024

AVAILABLE EARLY MARCH '24

Built-in polarity protection

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.

Built-in capacitor module

The built-in capacitor module eliminates the need for external capacitors and unwanted space.

RPM speed limit function

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.

Zero timing competition design

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.

Built-in BEC supporting high-voltage steering gear

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

User-friendly and convenient for set-up

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.

Protection functions

The various protection functions have greatly improved the reliability and durability of the ESC.

Single programming and RESET design button

The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.

Support bi-directional motor movement

The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.

Support ESC firmware upgrade

Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No

Specifications

Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A

SPECIAL PRICE ON EXISTING STOCK ONLY

GT12 World Championship winning T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.

New for 2026 from Contact RC Tyres are these 36D compound Competition Touring car Tyres.

Selected as the control tyre for the BRCA Nationals 2026 in the 4WD classes.

Built with a new revlite wheel to allow improved gluing and modern dimensions.

The new wheel can be identified with a small pip on the inner dish. Includes the famous yellow medium insert and precisely glued in house at Schumacher Racing.

2026 identifying sticker on each wheel.

Perfect Super Glue for Rubber/Foam Tyres

The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard. 

New container and applicator.

MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.

It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.

The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.

The additive is manufactured and produced in Europe.
Content: 100ml

General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.

Keep out of the reach of children.

The all new SANWA MX-6 Radio is a fantastic 2.4GHz entry level transmitter and receiver set with the usual amazing SANWA quality.

Supplied with RX-391W Waterproof receiver.

The MX-6 has the basic functions you need like 10 model memory, dual rate, end point adjustment, sub trim and much more.

Compact, lightweight body.

New Transmission System "FH-E" MX-6 Main Functions
- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

NEW SPECIAL LOW PRICE.

Compatible Response Mode with SUR, SSR, SHR, NOR SSL CODE5/CODE10

Function Quick Setup Wizard Fully Adjustable Trigger Adjustable Steering and Throttle Tension INDICATOR FUNCTION can show Receiver Signal Strength and Packet Delivery Ratio Weight: 382 g

Power source: AAA Battery x 3 ONLY Compatible RF with FH5 Includes new RX-493i receiver

One of the outstanding features of MT-5 is the indicator function which can check signal receiving conditions using RX-493i. The conditions can be used for checking the device and correct receiver placement.

The latest Sanwa MT-R is the replacement for the much loved MT-S.  A 2.4Ghz 4 channel radio for leisure and racing use, the best radio in its class? We think so!

High Resolution RF mode: FH5
Sanwa Ultra Response (SUR) Mode
SSL CODE 10 Compatible

Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.

The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver. 

Specification (From MX-6)

- Display Model Name on LCD

 - Dual Rate(D/R)

 - End Point Adjustment(EPA)

 - Exponential(EXP)

 - Anti Lock Brake(ALB)

 - Trim(TRM)

 - Model Memory [10 Model](MODEL)

 - Sub-Trim(SUB-T)

 - Reverse(REV)

 - Model Name(NAME)

 - Voltage Monitor (BATT)

 - Supplied with RX-391W Waterproof Receiver

 - Supplied with 4 x AA Battery box (Requires batteries)

IN STOCK .... MASSIVE DISCOUNT

SANWA RX-472 Telemetry/SSL Receiver 

- 2.4GHz FHSS4/FHSS3 Spread spectrum system 4ch 
- Sanwa Synchronised Link ( SSL ) function support 
- Sanwa Super Response (SSR) support 
- Lightest receiver in class 

Frequency - 2.4GHz FHSS4/FHSS3 
Channel - 4ch 
Nominal Input Voltage - 4.8~7.4V 
Dimensions - 30.0x23.3x14.0mm 
- 6.6g 
Compatible radio - M12, EXZES Z, MT-4 ( SSL not support ) 
SSL Function (Sanwa Synchronised Link) System From using both of "RX-472" and "Super Vortex Zero", Drivers operate "Code AUX Function" which is included on M12 & EXZES-Z and can adjust setting of equipment directly and quickly from Radios. 
In case of using SSL System, Drivers don't need to use Setting Card or PC. And also, Telemetry data can be sent to Radios without using any Sensors. 

In case of using MT-4 with both of "RX-472" and "Super Vortex Zero", SSL Function is not responded, but Telemetry data can be sent to Radios without using any Sensors.

- 2.4GHz FHSS4 Spread Spectrum System 4CH
- Telemetry-Compatible
- SSL-Compatible (SUPER VORTEX ESC etc.)
- Super Response (SSR) Mode Compatible
- Lightest weight in the same class receivers
- Frequency - 2.4GHz FHSS4 - Nominal Input Voltage
- 3.7-7.4V - Weight - 6.6g
- Channel - 4CH
- Dimensions - 30.0x23.3x14.0mm
- Compatible radio - M12S, M12, EXZES ZZ, EXZES Z, MT-4S, MT-4(non-Compatible with SSL),MT-S

- Do not cut antenna lead since it will decrease sensitivity.

RX-482 Telemetry/SSL Receiver

- 2.4GHz FHSS4 Spread spectrum system 4ch
- SSL support (ESC: Super Vortex Series etc.)
- Built-in Antenna
- Sanwa Super Response (SSR) support

Frequency - 2.4GHz FHSS4
Channel - 4ch
Nominal Input Voltage - 3.7V~7.4V
Dimensions - 18.2x24.4x27.1mm
Weight - 7.1g
Compatible radio - M12, Exzes Z, MT-4S, MT-4(No SSL support)

For the SANWA M17, MT-5 and MT-R transmitters is this budget friendly receiver.

Specifications Compatible with FH5/FH5U (M17/MT-5/MT-R)
Compatible with SXR Response Mode
Compatible with SSL Function
Voltage: 4.8 - 7.4 V Water Proof (as IPX4) Antenna pipe
COAXIAL ANTENNA with Antenna Pipe

*MT-5 indicator function is not compatible

The RX-493 receiver includes coaxial antenna and pipe for greater range and more stability.

The RX-493 is compatible with FH5/FH5U system for M17 radio ONLY.

Compatible with SXR response mode.

Voltage 4.8-7.4v and water proof (as IPX4) Compatible with SSL function.

Easy install antenna pipe.

26x23.2x14mm
6.2g
Recommended pipe length 100mm

SSL Compatible
- Compatible with CODE10 (M12S (RS), Exzes ZZ, MT-44)
Not compatible with CODE5 (M12, Exzes Z, MT-4S, MT-4, MT-S)
- MULTI SETTING GEAR compatible
Not compatible with PGS SETTING GEAR
- SSR mode compatible
- SHR mode compatible
- Lipo 2 cell battery compatible
- High torque type
- Coreless motor
- Metal Gears
- AL Heat Sink

Programmable Servo to be compatible with SSL & Telemetry
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Multi Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Multi Setting Gear is necessary.

- Setting Items
- SSL-CH (SSL Channel Setting) - STRETC (Stretcher Adjustment) - BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) - MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) - BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
- Multi Setting Gear is necessary for setting.

Speed
0.11 sec / 60° (7.4 V)
0.13 sec / 60° (6.0 V)

Torque
26.5 kg ·cm (7.4 V)
23.3 kg ·cm (6.0 V)

Dimensions
40.5 X 20.5 X 37.2 mm

Weight
59 g

SANWA PGS-HR Servo

- Digital Servo
- Coreless Motor
- Full metal gear
- LiPo (1 & 2cell)
- PGS SETTING GEAR-COMPATIBLE


Speed
0.10 sec / 60° (6.0 V)
0.16 sec / 60° (3.7 V)

Torque
3.8 kg·cm (6.0 V)
5.8 kg·cm (3.7 V)

Dimensions
27.0 x 21.1 x 30.5 mm

Weight
24 g

Sanwa Radio Bag complete with shoulder strap.

Flat hand file. Tungsten Carbide.
Dims. 230 x 38mm thickness 1.6mm.
Useful to get into narrow places where the sanding block is unable to fit.  
Use to clean up slots, cut outs in former's and general sanding. Use to de-burr aluminium, and other jagged edges.

IDEAL FOR FOAM TYRE TRUING/FINISHING.
Coarse...... 1/8th Nitro and 1/10th Foams
Fine............1/10th and 1/12th Scale Foams

Perma-Grit® Tools will cut:-  All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminium, Ceramics, Stone, Horn, Antler etc.

BARGAIN OF THE YEAR....!

The Charger/Tool Bag from RC Overhaul offers a simple and versatile way to store an array of RC kit.
It's size makes it ideal to keep all the accessories that come in the box with your RTR vehicle (basic tools and chargers) so they don't get misplaced; or for those with a more extensive range of tools it can be a dedicated tool bag and with the included divider you can divide the space to best suit your needs.
The bag can accommodate multiple transmitters for safe storage or even a place to keep your SCX24! It perfectly fits into the RC Overhaul Hauler Bag offering a way to keep spares, tools, wheels and tyres neatly stored alongside your RC vehicle.

Depending on your need you can fit 2 to 3 bags across the width depending on how much space is required for other things. Or you could fit a maximum of 9 bags into the Hauler for those looking to keep everything organised and tidy. It is made from a durable canvas material and fitted with a sturdy double zipped lid to contain the contents. The bag features a solid base to hold the 250x150mm footprint rigid, whilst the single included divider allow you to divide the space along the length at any point for keeping tools and chargers (of various sizes) separate. It comes flat packed and can be put together in a matter of seconds.
If you are looking to find a way to store an array of items, or just looking to keep together the extras that came with your RTR vehicle, the Charger/Tool Bag from RC Overhaul offers a simple and economically priced solution.