New Products
New Products
Home
Active filters
-
AV-001-05 AVALON...
£34.99.05mm 'Light'
The Avalon VORTEX is the new high-performance body from by Avalon Racing, developed and manufactured in Germany, specifically for use in 1/10 scale touring car racing.
Designed using state-of-the-art 3D CAD technology and refined through extensive test drives by various drivers on different race tracks, the VORTEX sets new standards in terms of aerodynamics and driving dynamics. -
AV-001-07 AVALON...
£34.99.07mm 'Light'
The Avalon VORTEX is the new high-performance body from by Avalon Racing, developed and manufactured in Germany, specifically for use in 1/10 scale touring car racing.
Designed using state-of-the-art 3D CAD technology and refined through extensive test drives by various drivers on different race tracks, the VORTEX sets new standards in terms of aerodynamics and driving dynamics. -
-
Highest B210 (Torque)...
£149.99Highest B210 (Torque) Servo
Highest Servo's are used by some of the best drivers on the planet including our own Jorn Neumann and Olly Jefferies, plus David Ronnefalk and Ronald Volker.
A high torque brushless servo mainly for 1/8th buggy class and 1/8th On-Road.
Specifications
- High Efficiency Brushless Motor- Full Aluminium Case
- Full Metal Gears-POWER GEAR
- Output Shaft 25T
- Dynamic Torque (6.0V) : 24.5 kg-cm
(7.4V) : 31.1 kg-cm
- Operating Speed (6.0V) : 0.12 sec/60°
(7.4V) : 0.09 sec/60°
- Operating Temperature 14° to 140° F (-10 to +60° C)
- Operating Voltage 6.0V~7.4V
- Size 39.5 * 20.0 * 38.7 mm
- Weight 73.1g
-
MAXIMA R6 .21 ON-ROAD...
£455.99 £599.99ONE LEFT WITH MAXIMA MODIFIED BACK-PLATE
Maxima MX Europa have introduced their new .21 engine for 1/8 On-Road class, the Maxima Mx R6.
Over the past years several tests have been done with Mx R2 and Mx R4 to get to the R6,
with all the quality standard of our engines and overall performance regarding torque and runtime.The Mx R6 is based on O.S Speed R2103 with special factory modifications to Crankshaft, Liner and
Piston and comes 'Pre-Run' to shorten the running in process by half!
Main Features:
Lower Centre of gravity for better handling
• A second inner button head allows for finer tuning to meet track conditions
• New ceramic rear bearing reduces friction loss
• Compatible with 16% nitro fuel, which complies with EFRA regulations
• Retains O.S Speed innovations such as DLC coating and tungsten weighted crank shaft
Power with Economy!
All motors are factory selected, tuned and modified by Maxima.PLEASE NOTE:
ALL MAXIMA MOTORS ARE SUPPLIED PRE-RUN USING OIL BATH METHOD (Not fully run-in) -
-
Marc Rheinard Outdoor...
£17.99The leading additive for rubber tyres on tarmac. Developed by Multiple World Champion Marc Rheinard.
New container and applicator.
-
MR33 V5 CARPET ADDITIVE
£17.99MR33 proudly presents the new V5 Tyre Adhesive, which is particularly suitable for use on carpets.
It has been specially developed for carpet racing rubber tyres and foam tyres tyres and has a new advanced formula.
The application time is between 10 and 30 minutes, depending on the desired adhesion.
It is recommended to clean the tyres with brake cleaner etc. between runs.The additive is manufactured and produced in Europe.
Content: 100ml
General Note/ General Reference Regular Avoid skin contact, eye contact, inhalation and ingestion of the product at . Wash or rinse with water after accidental contact. Keep out of the reach of children. Avoid constant skin contact, eye contact, inhaling and swallowing of this product. After, unintentional, contact wash or rinse with water.Keep out of the reach of children.
-
-
BODY PROTECTION SPONGE...
£2.99RIDE SELF ADHESIVE BODY PROTECTION SPONGE PADS 10PCS
Ideal for protecting your bodies. These foam protectors have an adhesive side for ease of use. Ideal for 1/10th scale and smaller.
