Arrowmax Theme Racing Mask is your perfect outdoor essential.

Carefully designed for all weather conditions, keeping breathability and comfort in mind.  Arrowmax reusable outdoor protection mask helps to protect you and your fellow racers from viruses, pollutants, dust etc.

The mask is designed to fit an optional filter giving a better protection and keeping it fresh at all times.

The mask’s ear loops can be adjusted to your desired fit. Each one is made to rest comfortably on your face without obscuring your view or constricting your chin and cheek which makes it ideal for racing RC cars.

Uses PM 2.5 filter AM140027

It is recommended to wash the mask after every days use.

PM 2.5 replaceable filter for the Arrowmax safety face mask AM140026 and other brands.

It is suggested to replace daily if on constant use.

Set of 4

ARROWMAX SET-UP WHEELS FOR 1/8 ON-ROAD 

CHASSIS DROOP GAUGE -3TO10MM - 1/8 & 1/10 BLK GOLD

ARROWMAX 1/8th 'ON-ROAD' SET-UP SYSTEM

Black Golden Series.

Comes with zipped storage bag.

CHASSIS DROOP GAUGE BLOCKS 20MM BLK - 2PCS

CHASSIS DROOP GAUGE BLOCKS 30MM 1/8 ON ROAD

ARROWMAX Tools Base V2 BLACK & GOLD.

You'll never know how you did without one!!!!

Wrench-Glowplug / Clutch-nut - 8mm/10mm

NEW Arrowmax Shock Clamp Tool.

NEVER build your shocks without this tool. Now with Nylon Insert Jaws for Shock Shaft Protection.

ARROWMAX HONEYCOMB TOOL SET WITH TOOL BAG

Honeycomb Tool Set with Tool Bag - 21pcs 

Arrowmax Honeycomb tool set including the following tools; 

AM410115 - ALLEN WRENCH 1.5 X 120MM Honeycomb 
AM410120 - ALLEN WRENCH 2.0 X 120MM Honeycomb 
AM410125 - ALLEN WRENCH 2.5 X 120MM Honeycomb 
AM410130 - ALLEN WRENCH 3.0 X 120MM Honeycomb 
AM420120 - BALL DRIVER HEX WRENCH 2.0 X 120MM Honeycomb 
AM420125 - BALL DRIVER HEX WRENCH 2.5 X 120MM Honeycomb 
AM420130 - BALL DRIVER HEX WRENCH 3.0 X 120MM Honeycomb 
AM430130 - FLAT HEAD SCREWDRIVER 3.0 X 150MM Honeycomb 
AM430158 - FLAT HEAD SCREWDRIVER 5.8 X 100MM Honeycomb 
AM440135 - PHILLIPS SCREWDRIVER 3.5 X 120MM Honeycomb 
AM440158 - PHILLIPS SCREWDRIVER 5.8 X 120MM Honeycomb 
AM450150 - NUT DRIVER 5.0 X 100MM Honeycomb 
AM450155 - NUT DRIVER 5.5 X 100MM Honeycomb 
AM450170 - NUT DRIVER 7.0 X 100MM Honeycomb 
AM490003 - REAMER WITH END CAP FOR LEXAN BODY Honeycomb 
AM490021 - ARM REAMER 3.0 X 120MM Honeycomb 
AM490023 - ARM REAMER 4.0 X 120MM Honeycomb 
AM190008 - TURNBUCKLE WRENCH 3MM V2 
AM190009 - TURNBUCKLE WRENCH 4MM V2 
AM190010 - TURNBUCKLE WRENCH 5MM V2 
AM190025-G - MULTI SHOCK-CLAMP V2 ( Gray ) 
AM199401 - AM EMBROIDERY TOOL BAG

An Ideal Starter Toolkit

THE IDEAL 'STARTER' TOOL KIT FOR NITRO CARS.

ARROWMAX BLACK/GOLDEN ALLEN WRENCH SET

Allen Wrench Set... 1.5mm/2mm/2.5mm/3mm

ALLEN WRENCH - 1.5 X 120MM TIP ONLY V2 GOLD

ALLEN WRENCH 2.0 X 120MM TIP ONLY V2 GOLD

ALLEN WRENCH 2.5 X 120MM TIP ONLY V2 GOLD

ALLEN WRENCH 2.0X100MM TIP ONLY-WOLFRAM

TUNGSTEN STEEL

ARROWMAX 2.5mm x 120mm Tungsten Steel Replacement Tip.

ALLEN WRENCH 2.5X100MM TIP ONLY-WOLFRAM

TUNGSTEN STEEL

BALL DRIVER HEX WRENCH 2.5X100MM

TIP ONLY-WOLFRAM

AEROX TC DROOP GAUGE SET & 10mm BLOCKS

Introducing the new Aerox droop gauge set for 1-10th Touring cars.

A new universal way to take the confusion out of measuring droop across different chassis manufacturers.

Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.

Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.

For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.

Introducing the new Aerox droop gauge set for 1-10th Touring cars.

A new universal way to take the confusion out of measuring droop across different chassis manufacturers.

Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.

Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.

For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.

Please note: You will have to use 10mm Blocks. Not supplied in this kit.

B0514 (MUGEN)

CLUTCH SPRING ADJUSTING TOOL FOR 1/8 & 1/10 ON ROAD.

MUGEN PINION GEAR TOOL

MUGEN B0543 CLUTCH SPACING THICKNESS GAUGE (.3, .4, .5, .6, .7 A

MUGEN ALLOY RIDE HEIGHT GAUGE

MUGEN TURNBUCKLE WRENCH

Pinion Gear Tool For 0.8M Gears.

MRX6X

Fine tuning of shock piston sizes has always been a tuning tool for the pro's. Now with this new tool from Core RC its a simple task for any racer. This hand drill comes included with 8 different drill bits 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm and 1.8mm.  The double ended chuck also allows for drill sizes between 0 to 2.9mm, for other simple hand drilling use.

Fine tuning of shock piston sizes has always been a tuning tool for the pro's. With this tool from Core RC its a simple task for any racer. This hand drill comes included with 8 different drill bits 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm and 2.2mm.

For smaller sizes please see CR233 -

A powerful, pocket-sized rechargeable screwdriver for DIY, hobby and electronics.
This screwdriver is ideal for tight spaces and tricky spots where the narrow tip and
LED light give you easy access and clear visibility.

Featuring a built-in rechargeable lithium-ion battery with micro USB charging cable
fully charged in just 60 mins.

Includes 4 Bits; Single end 75mm PH0, Single end 75mm PH1, Double end 75mm
PH2 & Slot, Double end 110mm PH2

An ideal tool for Touring car drivers who wish to run in/warm the diff before the race.
Add an AM551170 7mm power tool tip and you're all set.

Driver-Glowplug / Clutchnut - 8mm/10mm 

EDS Tools represent some of the finest quality tools you can buy. Top materials make for 
reliable use and long life.

Ideal for checking Spring Rates and Length.

MUGEN PIT MAT (2X4): BLACK ONLY

The new MR33 ride height gauge is machined from black anodised aluminium with silver chamfered edges. The ride height can be adjusted from 2,0 – 6,1mm in 0.1mm steps. The gauge carries the famous MR33 logo and looks pretty awesome!

PINK ARROWS 'ECO' ELECTRONIC VACUUM PUMP

Electronic Vacuum Pump from Pink Arrows (Italy)

A must have for anyone who wants to build their shocks and diffs 'air free' with the minimum of effort.

Needs 12v supply.

PROTOFORM BETTER EDGE SYSTEM SANDING DRUM

(FOR ROTARY TOOL)

Introducing a brand new product line from PROTOform: the Better Edge System. For every r/c enthusiast that takes pride in finishing off their concours-worthy race body, these products are for you.

The Better Edge sanding drum is our first product in this line. There has never been a product specifically made for r/c racers to finish off the perfect wheel-well. With the use of your handheld
rotary tool, the Better Edge Sanding Drum will smooth out all of the imperfections left from cutting your lexan body with scissors. At 1.5'' in diameter, it’s suitable for use on many scales of body:
from 1:12 scale on up to 1:8 or even off-road bodies.

The drum’s red and black anodised aluminium finish and laser-etched PROTOform logos give it a trick look on your pit table. Each pre-assembled kit comes with a replaceable high-grade silicon
carbide spiral sanding band, rubber anti-slip o-rings and a mandrel made from durable tool steel to prevent damage from your rotary tool’s chuck.

NOW BACK IN STOCK

The Mugen pit caddy has the following benefits:

- Durable, heavy duty material
- Padded handle
- Lightweight
- Eight small loops for misc. tools and one larger Velcro adjustable loop for larger items
- Front and rear halves of the bag measure 15" x 5" (approx.)
- Two inner side pockets for fuel bottles and/or fuel gun
- Three front pockets for additional storage with one pocket with Velcro for securing items

When the caddy is empty it can folded flat for easy storage.

Built to last a lifetime!

YMC sticker not supplied.

CAR STAND 1/10 TOURING/1/12TH -BLACK

Sky RC rubber tyre sander can be powered by a 12v power supply as well as directly from a 2s lipo battery. The tyre sander is a quick and easy way to remove the seam from the centre of a new tyre without having to take 2-3 laps around the track.

Features

Rubber tyre sander for touring class

Powerful high torque DC motor with dual metal bearings

Adjustable RPM

8 LED's indicate tyre running RPM

Leightweight aluminium case

Quiet operation

Reverse polarity protection

Tyre rotation can be changed

Flat hand file. Tungsten Carbide.
Dims. 230 x 38mm thickness 1.6mm.
Useful to get into narrow places where the sanding block is unable to fit.  
Use to clean up slots, cut outs in former's and general sanding. Use to de-burr aluminium, and other jagged edges.

IDEAL FOR FOAM TYRE TRUING/FINISHING.
Coarse...... 1/8th Nitro and 1/10th Foams
Fine............1/10th and 1/12th Scale Foams

Perma-Grit® Tools will cut:-  All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminium, Ceramics, Stone, Horn, Antler etc.

Flat hand file Coarse. Dims. 230 x 38mm thickness 1.6mm. Useful to get into narrow places where the sanding block is unable to fit.  Use to clean up slots, cut outs in former's and general sanding. Use to de-burr aluminium, and other jagged edges.

IDEAL FOR TYRE TRUING/FINISHING.

Perma-Grit® Tools will cut:-  All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminium, Ceramics, Stone, Horn, Antler etc.