RC Handsfree 2 Headsets. 

IFMAR Approved RC Communication System.

Complies with IFMAR rule 4.1.1 and EFRA rule 8.6.2b

Full Duplex System 

Microphone swivels 270 degrees 

Batteries type NB-6L

Includes batteries, charger and hard case.

Arrowmax Theme Racing Mask is your perfect outdoor essential.

Carefully designed for all weather conditions, keeping breathability and comfort in mind.  Arrowmax reusable outdoor protection mask helps to protect you and your fellow racers from viruses, pollutants, dust etc.

The mask is designed to fit an optional filter giving a better protection and keeping it fresh at all times.

The mask’s ear loops can be adjusted to your desired fit. Each one is made to rest comfortably on your face without obscuring your view or constricting your chin and cheek which makes it ideal for racing RC cars.

Uses PM 2.5 filter AM140027

It is recommended to wash the mask after every days use.

PM 2.5 replaceable filter for the Arrowmax safety face mask AM140026 and other brands.

It is suggested to replace daily if on constant use.

NEW Arrowmax Shock Clamp Tool.

NEVER build your shocks without this tool. Now with Nylon Insert Jaws for Shock Shaft Protection.

ARROWMAX FUEL BOTTLE

Built for ultra-fast refuelling, the fast fuel gun stands out as the trigger orientation that makes refuelling more ergonomic.

The materials used on the grip have been tested extensively over a
period of time with Arrowmax factory drivers to ensure mechanics get the best grip during refuelling.

ARROWMAX  LARGE CLEANING BRUSH

ARROWMAX 2.5mm x 120mm Tungsten Steel Replacement Tip.

LiPo batteries can be dangerous and BAT-SAFE provides the safest experience over all others.  Whether it will be storing, transporting or most importantly charging.

We highly recommend all LiPo batteries should be charged and stored in a BAT-SAFE box and not a LiPo bag.

The BAT-SAFE is a double-walled insulated steel box with a flame arrestor. Any battery within the specifications will not be a fire hazard if charged or stored inside the BAT-SAFE.

In case of a fire, the smoke and soot is also filtered by the flame arrestor.

Don't just take our word for it, check out the many reviews on youtube.

You can charge and store up to 2 pcs of 3S 2200mAh equivalent (50Wh) safely inside the BAT-SAFE MINI.

Do not exceed the manufacturers recommendation for maximum 50Wh for charging. 

So using the example below a 2S (7.4v) 6700mAh LiPo is the largest battery that can be charged in  a BAT-SAFE MINI. 

Wh = V x A

1 LiPo - 2S (7.4v) x 6700 (6.7A) mah = 49.6 Wh 

Charging space: 165*100*50mm

Outer dimensions: 195*128*115mm

Weight: 0.7kg

LiPo batteries can be dangerous and BAT-SAFE provides the safest experience over all others.  Whether it will be storing, transporting or most importantly charging.

We highly recommend all LiPo batteries should be charged and stored in a BAT-SAFE box and not a LiPo bag.

The BAT-SAFE is a double-walled insulated steel box with a flame arrestor. Any battery within the specifications will not be a fire hazard if charged or stored inside the BAT-SAFE.

In case of a fire, the smoke and soot is also filtered by the flame arrestor.

Don't just take our word for it, check out the many reviews on youtube.

It is easy to use, comes with a carrying handle and a removable charger stand.

You can charge and store up to a 2pc 6S 5000mAh equivalent (222Wh) safely inside the BAT-SAFE.

Do not exceed the manufacturers recommendation for maximum 222Wh for charging.

Wh = V x A

4 LiPo's - 2S (7.4v) x 6700 (6.7A) mah = 198.4 Wh 

Charging space: 240*165*102mm

Outer dimensions: 305*230*178mm

Weight: 1.85kg

Includes charger stand and velcro.

A must have for any pit box is the mini electric intelligent soldering iron from Centro! It is perfect for all your soldering requirements and ready to use in just over 10 seconds. It features an OLED display for the adjustable temperature range depending on the job in hand.

Simple connectivity to 12-24V DC power and a selection of optional power leads provides users with a host of ways to power up the iron. A selection of optional tips are available for you to fine tune your soldering depending on the job, making the mini pit iron as versatile as they come.

Centro Mini Electronic Intelligent Soldering Iron Features:

• Ready to use in 10-15 seconds

• OLED Display

• Adjustable Temperature Range

• 12-24V DC Input Voltage

• Optional Tips Available

• Compact and portable

• Includes Sloped tip, power cable & stand

Spec Check:

• 65W power output @24v

• Temperature stability - ±2%

• Temperature Range - 100°C - 400°C (max)

Safety instructions:

• Ensure that you use the correct power supply and accessories

• Do not touch the tip of the soldering iron after the temperature has risen to avoid burns

• Before replacing the soldering iron tip, you must turn off the power and wait for the soldering iron to cool down

CENTRO MINI SOLDERING IRON LARGE SLOPED REPLACEMENT TIP

Mains Power Supply (UK version)

Makes it easy to carry your soldering iron to every meeting.

Case contents shown are not supplied with case.

Certex Anti-bacterial Hand Wash (Blue)

Gentle, Effective and Moisturising.

500ml Bottle

Fine tuning of shock piston sizes has always been a tuning tool for the pro's. Now with this new tool from Core RC its a simple task for any racer. This hand drill comes included with 8 different drill bits 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm and 1.8mm.  The double ended chuck also allows for drill sizes between 0 to 2.9mm, for other simple hand drilling use.

Fine tuning of shock piston sizes has always been a tuning tool for the pro's. With this tool from Core RC its a simple task for any racer. This hand drill comes included with 8 different drill bits 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm and 2.2mm.

For smaller sizes please see CR233 -

UltraLITE 2 PERSON SYSTEM (w/2 SINGLE HEADSETS, BATT/CHARG) 

The UL2SD UltraLITE 2-Person Headset System from Eartec includes one UltraLITE Single Master headset, one UltraLITE Double Remote headset, two batteries, a two-port charger, and a medium soft-side case. It is designed to accommodate two people who need to communicate wirelessly while simultaneously working with their hands.

The UltraLITE single and dual headsets have the tranceiver built right inside the ear-cup, eliminating headset wires and belt worn radios. They provide two-way voice communication and the microphone arm can swivel 270°.

MUGEN PIT MAT (2X4): BLACK ONLY

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

The new MR33 ride height gauge is machined from black anodised aluminium with silver chamfered edges. The ride height can be adjusted from 2,0 – 6,1mm in 0.1mm steps. The gauge carries the famous MR33 logo and looks pretty awesome!

System Compatibility:
Compatible with AMBrc2, AMBrc3, Mylaps RC3 and Mylaps RC4 systems. (Pre firmware version 4.5).

Power Lead/Plug: RC 3-pin standard type
Operating voltage: 2.1V-16V DC
Power consumption: approx 8mA @ 6V DC
Display LED: Ultra-bright Neon Blue

PLEASE NOTE: CHOOSE 'COLLECT IN STORE' AS THIS PRICE INCLUDES CARRIAGE

Heavy Duty Hoody from Matrix.

Please choose size..

Special protective grease resistant to high temperatures.


Apply to the surface of the exhaust pipe and the manifold.

All the rubber and dust residues that will be attached can
be easily removed with a simple cloth and without any difficulty.

One application is enough even for a full day, just do not remove the
product from the exhaust.

NOW BACK IN STOCK

The Mugen pit caddy has the following benefits:

- Durable, heavy duty material
- Padded handle
- Lightweight
- Eight small loops for misc. tools and one larger Velcro adjustable loop for larger items
- Front and rear halves of the bag measure 15" x 5" (approx.)
- Two inner side pockets for fuel bottles and/or fuel gun
- Three front pockets for additional storage with one pocket with Velcro for securing items

When the caddy is empty it can folded flat for easy storage.

Built to last a lifetime!

YMC sticker not supplied.

A Blast from the Past...... The Highly successful and easy to use Nitro Glow Starter from Racing Experience is back in stock.
Comes fitted with a 2100mah battery.

It's back in stock....

The RC Car Racer's Best friend. Repairing car bodies is just ONE of the many things that you can do with this amazing glue.

Flexible, clear when set and very strong!

CAR STAND 1/10 TOURING/1/12TH -BLACK

Flat hand file. Tungsten Carbide.
Dims. 230 x 38mm thickness 1.6mm.
Useful to get into narrow places where the sanding block is unable to fit.  
Use to clean up slots, cut outs in former's and general sanding. Use to de-burr aluminium, and other jagged edges.

IDEAL FOR FOAM TYRE TRUING/FINISHING.
Coarse...... 1/8th Nitro and 1/10th Foams
Fine............1/10th and 1/12th Scale Foams

Perma-Grit® Tools will cut:-  All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminium, Ceramics, Stone, Horn, Antler etc.

The VS Bearing shaker is a must have gadget for cleaning your bearings.
The internal cage keeps your bearings clear from the bottom of the case and away from the grease, oil and dirt as it is shaken loose from the bearing.
Use a quality bearing cleaning spray or liquid (brake cleaner etc) to clean the bearings and then allow the bearings to dry.
Once completely dried add a quality lubricant High Speed Bearing Lubricant to ensure optimum performance and service life from your bearings.

Spec:
Dimension: 61 mm X 32mm
70Ml