MUGEN ENGINE MAINTENANCE OIL (AFTER-RUN ETC)

MUGEN Air Filter Oil (100ML)

This is an excellent sticky oil to keep dirt and dust from entering your carburettor.

The best method is to pour a small amount of oil in a plastic bag and then put your
filter in the bag and squeeze the filter so the oil distributes throughout the foam.
The oil is very thin so make sure you squeeze any excess oil out before installing on your car.
Once the oil dries it will become very sticky.

NOTE: Wash out your filter after every 2 or 3 meetings. It will help protect your expensive engines!

A 'MUST HAVE' FOR EVERY TOOLBOX

B0330 Super Joint Grease.


Ideal for all joints.....plastic to plastic, plastic to metal and metal to metal...i.e. Drive Shaft Dog Bones &  
Joints etc.

Dry-Fluid Extreme Super Lubricant

HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS

BALSAM FOR RC CARS

DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.

The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.

SLIDE-LUBRICANT INSTEAD OF OIL

DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.

PRODUCT-FEATURES

Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.

Lowest sliding friction for free movement and wear reduction

Multistage lubricant system with immediate and long-term effects

Dust and dirt repellent

Extremely good creeping abilities

Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties

This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.

Within the UK it can only be sent by UPS not post.  Please only select UPS for the shipping method at the checkout.

LONG-TERM EFFECTS FOR MODELLING GEARS

DryFluid Extreme Gear Lube was specially developed for highly stressed gears in modelling applications. Findings in the aviation and vehicle industries as well as the expert knowledge of many RC drivers are the driving forces behind this innovative modelling lubricant. It is characterized by a low sliding friction during an extreme compressive resistance and an excellent adhesive force. Due to the use of high-end slide lubricant components, DryFluid has minimal dust and dirt adhesion.

The main fields of application of DryFluid Extreme Gear Lube are gears of model helicopters, RC cars, trucks, model railways and servos. Also applicable for axles, joints and bearing systems in any modelling application.

SLIDE-LUBRICANT INSTEAD OF OIL OR GREASE

DryFluid Extreme Gear Lube is a dry lubricant rather than a classic grease. DryFluid is not wax; it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high-end sliding fluids. After application the fluid becomes dry and forms a white lubricant film. The application and long-term effects of DryFLuid Extreme Gear Lube will interest every modeller.

PRODUCT FEATURES:

Unprecedented lubricating properties

Reduction of power loss through friction

Reduction of running noise

Reduction of wear

Extreme pressure resistance

Long-term stability

Excellent adhesion

Excellent material compatibility with all current metal, plastic and natural rubber materials

Dust and dirt repellent

Perfect Super Glue for Rubber/Foam Tyres

MR33 BELT BOOSTER - 100ML

The MR33 Belt Booster is an additive designed to obtain maximum transmission smoothness.
Applied directly on the belts and pulleys, it increases their smoothness/fluidity without
compromising their resistance. The MR33 Belt Booster protects and reduces the friction between
rubber and plastic parts.

MR33-'GEL' TAPE - DOUBLE SIDED TAPE

It's back in stock....

The RC Car Racer's Best friend. Repairing car bodies is just ONE of the many things that you can do with this amazing glue.

Flexible, clear when set and very strong!