ACCESSORIES
All RC accessories and parts. Tools, Glues and Lubricants
-
RC Handsfree...
£340.00 £380.00RC Handsfree 2 Headsets.
IFMAR Approved RC Communication System.
Complies with IFMAR rule 4.1.1 and EFRA rule 8.6.2b
Full Duplex System
Microphone swivels 270 degrees
Batteries type NB-6L
Includes batteries, charger and hard case.
Standard DECT technology, GAP compatible Range 1200ft (366 Meters) open space Talk Time 12-15 Hours; Channel Bandwidth 1.728 MHz Modulation Type GFSK Transmission Speed 1.152 Mbps Duplex Operation Time Division Duplex (TDD) Speech Coding ADPCM transcoder supports up to 8 duplex 32kbs channels, fully compliant with ITU G.726 Frequency Bands 1.78-1.93G -
PINION GEAR 48DP 27T...
£3.69Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
-
-
ARROWMAX FACE MASK
£7.99Arrowmax Theme Racing Mask is your perfect outdoor essential.
Carefully designed for all weather conditions, keeping breathability and comfort in mind. Arrowmax reusable outdoor protection mask helps to protect you and your fellow racers from viruses, pollutants, dust etc.
The mask is designed to fit an optional filter giving a better protection and keeping it fresh at all times.
The mask’s ear loops can be adjusted to your desired fit. Each one is made to rest comfortably on your face without obscuring your view or constricting your chin and cheek which makes it ideal for racing RC cars.
Uses PM 2.5 filter AM140027
It is recommended to wash the mask after every days use. -
PM2.5 FILTER FOR AM...
£3.99PM 2.5 replaceable filter for the Arrowmax safety face mask AM140026 and other brands.
It is suggested to replace daily if on constant use. -
MULTI SHOCK CLAMP - V3...
£24.99NEW Arrowmax Shock Clamp Tool.
NEVER build your shocks without this tool. Now with Nylon Insert Jaws for Shock Shaft Protection.
-
-
ARROWMAX 'FAST FUEL GUN'
£31.00Built for ultra-fast refuelling, the fast fuel gun stands out as the trigger orientation that makes refuelling more ergonomic.
The materials used on the grip have been tested extensively over a
period of time with Arrowmax factory drivers to ensure mechanics get the best grip during refuelling. -
-
-
-
MUGEN Air Filter Oil...
£13.49MUGEN Air Filter Oil (100ML)
This is an excellent sticky oil to keep dirt and dust from entering your carburettor.
The best method is to pour a small amount of oil in a plastic bag and then put your
filter in the bag and squeeze the filter so the oil distributes throughout the foam.
The oil is very thin so make sure you squeeze any excess oil out before installing on your car.
Once the oil dries it will become very sticky.
NOTE: Wash out your filter after every 2 or 3 meetings. It will help protect your expensive engines! -
B0330 MUGEN SUPER...
£4.95A 'MUST HAVE' FOR EVERY TOOLBOX
B0330 Super Joint Grease.
Ideal for all joints.....plastic to plastic, plastic to metal and metal to metal...i.e. Drive Shaft Dog Bones &
Joints etc. -
BAT-SAFE MINI LIPO...
£24.95LiPo batteries can be dangerous and BAT-SAFE provides the safest experience over all others. Whether it will be storing, transporting or most importantly charging.
We highly recommend all LiPo batteries should be charged and stored in a BAT-SAFE box and not a LiPo bag.
The BAT-SAFE is a double-walled insulated steel box with a flame arrestor. Any battery within the specifications will not be a fire hazard if charged or stored inside the BAT-SAFE.
In case of a fire, the smoke and soot is also filtered by the flame arrestor.
Don't just take our word for it, check out the many reviews on youtube.You can charge and store up to 2 pcs of 3S 2200mAh equivalent (50Wh) safely inside the BAT-SAFE MINI.
Do not exceed the manufacturers recommendation for maximum 50Wh for charging.
So using the example below a 2S (7.4v) 6700mAh LiPo is the largest battery that can be charged in a BAT-SAFE MINI.
Wh = V x A
1 LiPo - 2S (7.4v) x 6700 (6.7A) mah = 49.6 Wh
Charging space: 165*100*50mm
Outer dimensions: 195*128*115mm
Weight: 0.7kg -
BAT-SAFE MEDIUM LIPO...
£49.99LiPo batteries can be dangerous and BAT-SAFE provides the safest experience over all others. Whether it will be storing, transporting or most importantly charging.
We highly recommend all LiPo batteries should be charged and stored in a BAT-SAFE box and not a LiPo bag.
The BAT-SAFE is a double-walled insulated steel box with a flame arrestor. Any battery within the specifications will not be a fire hazard if charged or stored inside the BAT-SAFE.
In case of a fire, the smoke and soot is also filtered by the flame arrestor.
Don't just take our word for it, check out the many reviews on youtube.It is easy to use, comes with a carrying handle and a removable charger stand.
You can charge and store up to a 2pc 6S 5000mAh equivalent (222Wh) safely inside the BAT-SAFE.
Do not exceed the manufacturers recommendation for maximum 222Wh for charging.
Wh = V x A
4 LiPo's - 2S (7.4v) x 6700 (6.7A) mah = 198.4 Wh
Charging space: 240*165*102mm
Outer dimensions: 305*230*178mm
Weight: 1.85kg
Includes charger stand and velcro. -
CENTRO MINI ELECTRIC...
£59.99A must have for any pit box is the mini electric intelligent soldering iron from Centro! It is perfect for all your soldering requirements and ready to use in just over 10 seconds. It features an OLED display for the adjustable temperature range depending on the job in hand.
Simple connectivity to 12-24V DC power and a selection of optional power leads provides users with a host of ways to power up the iron. A selection of optional tips are available for you to fine tune your soldering depending on the job, making the mini pit iron as versatile as they come.Centro Mini Electronic Intelligent Soldering Iron Features:
-
Ready to use in 10-15 seconds
-
OLED Display
-
Adjustable Temperature Range
-
12-24V DC Input Voltage
-
Optional Tips Available
-
Compact and portable
-
Includes Sloped tip, power cable & stand
Spec Check:
-
65W power output @24v
-
Temperature stability - ±2%
-
Temperature Range - 100°C - 400°C (max)
Safety instructions:
-
Ensure that you use the correct power supply and accessories
-
Do not touch the tip of the soldering iron after the temperature has risen to avoid burns
-
Before replacing the soldering iron tip, you must turn off the power and wait for the soldering iron to cool down
-
-
-
-
CENTRO MINI SOLDERING...
£5.99Makes it easy to carry your soldering iron to every meeting.
Case contents shown are not supplied with case. -
CERTEX ANTIBACTERIAL...
£3.50Certex Anti-bacterial Hand Wash (Blue)
Gentle, Effective and Moisturising.
500ml Bottle -
PISTON DRILLING...
£7.99Fine tuning of shock piston sizes has always been a tuning tool for the pro's. Now with this new tool from Core RC its a simple task for any racer. This hand drill comes included with 8 different drill bits 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm and 1.8mm. The double ended chuck also allows for drill sizes between 0 to 2.9mm, for other simple hand drilling use.
-
PISTON DRILLING KIT -...
£8.99Fine tuning of shock piston sizes has always been a tuning tool for the pro's. With this tool from Core RC its a simple task for any racer. This hand drill comes included with 8 different drill bits 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm and 2.2mm.
For smaller sizes please see CR233 - -
-
-
-
-
PINION GEAR 48DP 25T...
£3.69Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 28T...
£3.69Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 29T...
£3.69Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 30T...
£3.79Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 31T...
£3.79Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 32T...
£3.79Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 33T...
£3.79Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 35T...
£3.79Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
PINION GEAR 48DP 36T...
£3.79Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.
-
Dry-Fluid Extreme RC...
£13.99Dry-Fluid Extreme Super Lubricant
HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS
BALSAM FOR RC CARS
DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.
The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.
SLIDE-LUBRICANT INSTEAD OF OIL
DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.
PRODUCT-FEATURES
Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.
Lowest sliding friction for free movement and wear reduction
Multistage lubricant system with immediate and long-term effects
Dust and dirt repellent
Extremely good creeping abilities
Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties
This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
Within the UK it can only be sent by UPS not post. Please only select UPS for the shipping method at the checkout.
-
Dry-Fluid Extreme Gear...
£13.99LONG-TERM EFFECTS FOR MODELLING GEARS
DryFluid Extreme Gear Lube was specially developed for highly stressed gears in modelling applications. Findings in the aviation and vehicle industries as well as the expert knowledge of many RC drivers are the driving forces behind this innovative modelling lubricant. It is characterized by a low sliding friction during an extreme compressive resistance and an excellent adhesive force. Due to the use of high-end slide lubricant components, DryFluid has minimal dust and dirt adhesion.
The main fields of application of DryFluid Extreme Gear Lube are gears of model helicopters, RC cars, trucks, model railways and servos. Also applicable for axles, joints and bearing systems in any modelling application.
SLIDE-LUBRICANT INSTEAD OF OIL OR GREASEDryFluid Extreme Gear Lube is a dry lubricant rather than a classic grease. DryFluid is not wax; it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high-end sliding fluids. After application the fluid becomes dry and forms a white lubricant film. The application and long-term effects of DryFLuid Extreme Gear Lube will interest every modeller.
PRODUCT FEATURES:
Unprecedented lubricating properties
Reduction of power loss through friction
Reduction of running noise
Reduction of wear
Extreme pressure resistance
Long-term stability
Excellent adhesion
Excellent material compatibility with all current metal, plastic and natural rubber materials
Dust and dirt repellent
-
EARTEC ULTRALITE 2...
£399.99UltraLITE 2 PERSON SYSTEM (w/2 SINGLE HEADSETS, BATT/CHARG)
The UL2SD UltraLITE 2-Person Headset System from Eartec includes one UltraLITE Single Master headset, one UltraLITE Double Remote headset, two batteries, a two-port charger, and a medium soft-side case. It is designed to accommodate two people who need to communicate wirelessly while simultaneously working with their hands.
The UltraLITE single and dual headsets have the tranceiver built right inside the ear-cup, eliminating headset wires and belt worn radios. They provide two-way voice communication and the microphone arm can swivel 270°. -
-